d608dcaa62
This enables the user to override the transport used for st-link. If JTAG is selected it will also change the default id used to the JTAG id rather than the SW-DP id. Change-Id: I4fe352e4932e2f4ec278168e99ba2d2d50fd850a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/443 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
49 lines
1.1 KiB
INI
49 lines
1.1 KiB
INI
#
|
|
# stm32 stlink pseudo target
|
|
#
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME stm32f1x
|
|
}
|
|
|
|
# Work-area is a space in RAM used for flash programming
|
|
# By default use 16kB
|
|
if { [info exists WORKAREASIZE] } {
|
|
set _WORKAREASIZE $WORKAREASIZE
|
|
} else {
|
|
set _WORKAREASIZE 0x4000
|
|
}
|
|
|
|
if { [info exists CPUTAPID] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
# this is the SW-DP tap id not the jtag tap id
|
|
set _CPUTAPID 0x1ba01477
|
|
}
|
|
|
|
if { [info exists TRANSPORT] } {
|
|
set _TRANSPORT $TRANSPORT
|
|
if { $TRANSPORT == "stlink_jtag" } {
|
|
if { [info exists CPUTAPID] == 0 } {
|
|
# jtag requires us to use the jtag tap id
|
|
set _CPUTAPID 0x3ba00477
|
|
}
|
|
}
|
|
} else {
|
|
set _TRANSPORT stlink_swd
|
|
}
|
|
|
|
#
|
|
# possibles value are stlink_swd or stlink_jtag
|
|
#
|
|
transport select $_TRANSPORT
|
|
|
|
stlink newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
|
|
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME stm32_stlink -chain-position $_TARGETNAME
|
|
|
|
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
|