38ac08c1c2
Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
41 lines
1.0 KiB
INI
41 lines
1.0 KiB
INI
################################################################################
|
|
# Author: Michael Trensch (MTrensch@googlemail.com)
|
|
################################################################################
|
|
|
|
source [find target/hilscher_netx50.cfg]
|
|
|
|
reset_config trst_and_srst
|
|
adapter srst delay 500
|
|
jtag_ntrst_delay 500
|
|
|
|
$_TARGETNAME configure -work-area-virt 0x10000000 -work-area-phys 0x10000000 -work-area-size 0x4000 -work-area-backup 1
|
|
|
|
$_TARGETNAME configure -event reset-init {
|
|
halt
|
|
|
|
arm7_9 fast_memory_access enable
|
|
arm7_9 dcc_downloads enable
|
|
|
|
sdram_fix
|
|
|
|
puts "Configuring SDRAM controller for MT48LC2M32 (8MB) "
|
|
mww 0x1C000140 0
|
|
mww 0x1C000144 0x00A12151
|
|
mww 0x1C000140 0x030D0001
|
|
|
|
puts "Configuring SRAM nCS0 for 90ns Par. Flash (x16)"
|
|
mww 0x1C000100 0x01010008
|
|
|
|
flash probe 0
|
|
}
|
|
|
|
#####################
|
|
# Flash configuration
|
|
#####################
|
|
|
|
#flash bank <name> <driver> <base> <size> <chip width> <bus width> <target#>
|
|
flash bank parflash cfi 0xC0000000 0x01000000 2 2 $_TARGETNAME
|
|
|
|
init
|
|
reset init
|