101c602b5e
With this option a different channel of the ft2232 chip can be selected using a previously existing layout. It was made for a partner called Salvador Tropea. Change-Id: Ia0dedb2f50e232d089e73788735edc8f47ee23e6 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1095 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
4298 lines
115 KiB
C
4298 lines
115 KiB
C
/***************************************************************************
|
|
* Copyright (C) 2009 by Øyvind Harboe *
|
|
* Øyvind Harboe <oyvind.harboe@zylin.com> *
|
|
* *
|
|
* Copyright (C) 2009 by SoftPLC Corporation. http://softplc.com *
|
|
* Dick Hollenbeck <dick@softplc.com> *
|
|
* *
|
|
* Copyright (C) 2004, 2006 by Dominic Rath *
|
|
* Dominic.Rath@gmx.de *
|
|
* *
|
|
* Copyright (C) 2008 by Spencer Oliver *
|
|
* spen@spen-soft.co.uk *
|
|
* *
|
|
* This program is free software; you can redistribute it and/or modify *
|
|
* it under the terms of the GNU General Public License as published by *
|
|
* the Free Software Foundation; either version 2 of the License, or *
|
|
* (at your option) any later version. *
|
|
* *
|
|
* This program is distributed in the hope that it will be useful, *
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
|
* GNU General Public License for more details. *
|
|
* *
|
|
* You should have received a copy of the GNU General Public License *
|
|
* along with this program; if not, write to the *
|
|
* Free Software Foundation, Inc., *
|
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
|
***************************************************************************/
|
|
|
|
/**
|
|
* @file
|
|
* JTAG adapters based on the FT2232 full and high speed USB parts are
|
|
* popular low cost JTAG debug solutions. Many FT2232 based JTAG adapters
|
|
* are discrete, but development boards may integrate them as alternatives
|
|
* to more capable (and expensive) third party JTAG pods.
|
|
*
|
|
* JTAG uses only one of the two communications channels ("MPSSE engines")
|
|
* on these devices. Adapters based on FT4232 parts have four ports/channels
|
|
* (A/B/C/D), instead of just two (A/B).
|
|
*
|
|
* Especially on development boards integrating one of these chips (as
|
|
* opposed to discrete pods/dongles), the additional channels can be used
|
|
* for a variety of purposes, but OpenOCD only uses one channel at a time.
|
|
*
|
|
* - As a USB-to-serial adapter for the target's console UART ...
|
|
* which may be able to support ROM boot loaders that load initial
|
|
* firmware images to flash (or SRAM).
|
|
*
|
|
* - On systems which support ARM's SWD in addition to JTAG, or instead
|
|
* of it, that second port can be used for reading SWV/SWO trace data.
|
|
*
|
|
* - Additional JTAG links, e.g. to a CPLD or * FPGA.
|
|
*
|
|
* FT2232 based JTAG adapters are "dumb" not "smart", because most JTAG
|
|
* request/response interactions involve round trips over the USB link.
|
|
* A "smart" JTAG adapter has intelligence close to the scan chain, so it
|
|
* can for example poll quickly for a status change (usually taking on the
|
|
* order of microseconds not milliseconds) before beginning a queued
|
|
* transaction which require the previous one to have completed.
|
|
*
|
|
* There are dozens of adapters of this type, differing in details which
|
|
* this driver needs to understand. Those "layout" details are required
|
|
* as part of FT2232 driver configuration.
|
|
*
|
|
* This code uses information contained in the MPSSE specification which was
|
|
* found here:
|
|
* http://www.ftdichip.com/Documents/AppNotes/AN2232C-01_MPSSE_Cmnd.pdf
|
|
* Hereafter this is called the "MPSSE Spec".
|
|
*
|
|
* The datasheet for the ftdichip.com's FT2232D part is here:
|
|
* http://www.ftdichip.com/Documents/DataSheets/DS_FT2232D.pdf
|
|
*
|
|
* Also note the issue with code 0x4b (clock data to TMS) noted in
|
|
* http://developer.intra2net.com/mailarchive/html/libftdi/2009/msg00292.html
|
|
* which can affect longer JTAG state paths.
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
/* project specific includes */
|
|
#include <jtag/interface.h>
|
|
#include <transport/transport.h>
|
|
#include <helper/time_support.h>
|
|
|
|
#if IS_CYGWIN == 1
|
|
#include <windows.h>
|
|
#endif
|
|
|
|
#include <assert.h>
|
|
|
|
#if (BUILD_FT2232_FTD2XX == 1 && BUILD_FT2232_LIBFTDI == 1)
|
|
#error "BUILD_FT2232_FTD2XX && BUILD_FT2232_LIBFTDI are mutually exclusive"
|
|
#elif (BUILD_FT2232_FTD2XX != 1 && BUILD_FT2232_LIBFTDI != 1)
|
|
#error "BUILD_FT2232_FTD2XX || BUILD_FT2232_LIBFTDI must be chosen"
|
|
#endif
|
|
|
|
/* FT2232 access library includes */
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
#include <ftd2xx.h>
|
|
#include "ftd2xx_common.h"
|
|
|
|
enum ftdi_interface {
|
|
INTERFACE_ANY = 0,
|
|
INTERFACE_A = 1,
|
|
INTERFACE_B = 2,
|
|
INTERFACE_C = 3,
|
|
INTERFACE_D = 4
|
|
};
|
|
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
#include <ftdi.h>
|
|
#endif
|
|
|
|
/* max TCK for the high speed devices 30000 kHz */
|
|
#define FTDI_x232H_MAX_TCK 30000
|
|
/* max TCK for the full speed devices 6000 kHz */
|
|
#define FTDI_2232C_MAX_TCK 6000
|
|
/* this speed value tells that RTCK is requested */
|
|
#define RTCK_SPEED -1
|
|
|
|
/*
|
|
* On my Athlon XP 1900+ EHCI host with FT2232H JTAG dongle I get read timeout
|
|
* errors with a retry count of 100. Increasing it solves the problem for me.
|
|
* - Dimitar
|
|
*
|
|
* FIXME There's likely an issue with the usb_read_timeout from libftdi.
|
|
* Fix that (libusb? kernel? libftdi? here?) and restore the retry count
|
|
* to something sane.
|
|
*/
|
|
#define LIBFTDI_READ_RETRY_COUNT 2000
|
|
|
|
#ifndef BUILD_FT2232_HIGHSPEED
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
enum { FT_DEVICE_2232H = 6, FT_DEVICE_4232H, FT_DEVICE_232H };
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
enum ftdi_chip_type { TYPE_2232H = 4, TYPE_4232H = 5, TYPE_232H = 6 };
|
|
#endif
|
|
#endif
|
|
|
|
/**
|
|
* Send out \a num_cycles on the TCK line while the TAP(s) are in a
|
|
* stable state. Calling code must ensure that current state is stable,
|
|
* that verification is not done in here.
|
|
*
|
|
* @param num_cycles The number of clocks cycles to send.
|
|
* @param cmd The command to send.
|
|
*
|
|
* @returns ERROR_OK on success, or ERROR_JTAG_QUEUE_FAILED on failure.
|
|
*/
|
|
static int ft2232_stableclocks(int num_cycles, struct jtag_command *cmd);
|
|
|
|
static char *ft2232_device_desc_A;
|
|
static char *ft2232_device_desc;
|
|
static char *ft2232_serial;
|
|
static uint8_t ft2232_latency = 2;
|
|
static unsigned ft2232_max_tck = FTDI_2232C_MAX_TCK;
|
|
static int ft2232_channel = INTERFACE_ANY;
|
|
|
|
#define MAX_USB_IDS 8
|
|
/* vid = pid = 0 marks the end of the list */
|
|
static uint16_t ft2232_vid[MAX_USB_IDS + 1] = { 0x0403, 0 };
|
|
static uint16_t ft2232_pid[MAX_USB_IDS + 1] = { 0x6010, 0 };
|
|
|
|
struct ft2232_layout {
|
|
char *name;
|
|
int (*init)(void);
|
|
void (*reset)(int trst, int srst);
|
|
void (*blink)(void);
|
|
int channel;
|
|
};
|
|
|
|
/* init procedures for supported layouts */
|
|
static int usbjtag_init(void);
|
|
static int jtagkey_init(void);
|
|
static int lm3s811_jtag_init(void);
|
|
static int icdi_jtag_init(void);
|
|
static int olimex_jtag_init(void);
|
|
static int flyswatter1_init(void);
|
|
static int flyswatter2_init(void);
|
|
static int minimodule_init(void);
|
|
static int turtle_init(void);
|
|
static int comstick_init(void);
|
|
static int stm32stick_init(void);
|
|
static int axm0432_jtag_init(void);
|
|
static int sheevaplug_init(void);
|
|
static int icebear_jtag_init(void);
|
|
static int cortino_jtag_init(void);
|
|
static int signalyzer_init(void);
|
|
static int signalyzer_h_init(void);
|
|
static int ktlink_init(void);
|
|
static int redbee_init(void);
|
|
static int lisa_l_init(void);
|
|
static int flossjtag_init(void);
|
|
static int xds100v2_init(void);
|
|
static int digilent_hs1_init(void);
|
|
|
|
/* reset procedures for supported layouts */
|
|
static void ftx23_reset(int trst, int srst);
|
|
static void jtagkey_reset(int trst, int srst);
|
|
static void olimex_jtag_reset(int trst, int srst);
|
|
static void flyswatter1_reset(int trst, int srst);
|
|
static void flyswatter2_reset(int trst, int srst);
|
|
static void minimodule_reset(int trst, int srst);
|
|
static void turtle_reset(int trst, int srst);
|
|
static void comstick_reset(int trst, int srst);
|
|
static void stm32stick_reset(int trst, int srst);
|
|
static void axm0432_jtag_reset(int trst, int srst);
|
|
static void sheevaplug_reset(int trst, int srst);
|
|
static void icebear_jtag_reset(int trst, int srst);
|
|
static void signalyzer_h_reset(int trst, int srst);
|
|
static void ktlink_reset(int trst, int srst);
|
|
static void redbee_reset(int trst, int srst);
|
|
static void xds100v2_reset(int trst, int srst);
|
|
static void digilent_hs1_reset(int trst, int srst);
|
|
|
|
/* blink procedures for layouts that support a blinking led */
|
|
static void olimex_jtag_blink(void);
|
|
static void flyswatter1_jtag_blink(void);
|
|
static void flyswatter2_jtag_blink(void);
|
|
static void turtle_jtag_blink(void);
|
|
static void signalyzer_h_blink(void);
|
|
static void ktlink_blink(void);
|
|
static void lisa_l_blink(void);
|
|
static void flossjtag_blink(void);
|
|
|
|
/* common transport support options */
|
|
|
|
/* static const char *jtag_and_swd[] = { "jtag", "swd", NULL }; */
|
|
|
|
static const struct ft2232_layout ft2232_layouts[] = {
|
|
{ .name = "usbjtag",
|
|
.init = usbjtag_init,
|
|
.reset = ftx23_reset,
|
|
},
|
|
{ .name = "jtagkey",
|
|
.init = jtagkey_init,
|
|
.reset = jtagkey_reset,
|
|
},
|
|
{ .name = "jtagkey_prototype_v1",
|
|
.init = jtagkey_init,
|
|
.reset = jtagkey_reset,
|
|
},
|
|
{ .name = "oocdlink",
|
|
.init = jtagkey_init,
|
|
.reset = jtagkey_reset,
|
|
},
|
|
{ .name = "signalyzer",
|
|
.init = signalyzer_init,
|
|
.reset = ftx23_reset,
|
|
},
|
|
{ .name = "evb_lm3s811",
|
|
.init = lm3s811_jtag_init,
|
|
.reset = ftx23_reset,
|
|
},
|
|
{ .name = "luminary_icdi",
|
|
.init = icdi_jtag_init,
|
|
.reset = ftx23_reset,
|
|
},
|
|
{ .name = "olimex-jtag",
|
|
.init = olimex_jtag_init,
|
|
.reset = olimex_jtag_reset,
|
|
.blink = olimex_jtag_blink
|
|
},
|
|
{ .name = "flyswatter",
|
|
.init = flyswatter1_init,
|
|
.reset = flyswatter1_reset,
|
|
.blink = flyswatter1_jtag_blink
|
|
},
|
|
{ .name = "flyswatter2",
|
|
.init = flyswatter2_init,
|
|
.reset = flyswatter2_reset,
|
|
.blink = flyswatter2_jtag_blink
|
|
},
|
|
{ .name = "minimodule",
|
|
.init = minimodule_init,
|
|
.reset = minimodule_reset,
|
|
},
|
|
{ .name = "turtelizer2",
|
|
.init = turtle_init,
|
|
.reset = turtle_reset,
|
|
.blink = turtle_jtag_blink
|
|
},
|
|
{ .name = "comstick",
|
|
.init = comstick_init,
|
|
.reset = comstick_reset,
|
|
},
|
|
{ .name = "stm32stick",
|
|
.init = stm32stick_init,
|
|
.reset = stm32stick_reset,
|
|
},
|
|
{ .name = "axm0432_jtag",
|
|
.init = axm0432_jtag_init,
|
|
.reset = axm0432_jtag_reset,
|
|
},
|
|
{ .name = "sheevaplug",
|
|
.init = sheevaplug_init,
|
|
.reset = sheevaplug_reset,
|
|
},
|
|
{ .name = "icebear",
|
|
.init = icebear_jtag_init,
|
|
.reset = icebear_jtag_reset,
|
|
},
|
|
{ .name = "cortino",
|
|
.init = cortino_jtag_init,
|
|
.reset = comstick_reset,
|
|
},
|
|
{ .name = "signalyzer-h",
|
|
.init = signalyzer_h_init,
|
|
.reset = signalyzer_h_reset,
|
|
.blink = signalyzer_h_blink
|
|
},
|
|
{ .name = "ktlink",
|
|
.init = ktlink_init,
|
|
.reset = ktlink_reset,
|
|
.blink = ktlink_blink
|
|
},
|
|
{ .name = "redbee-econotag",
|
|
.init = redbee_init,
|
|
.reset = redbee_reset,
|
|
},
|
|
{ .name = "redbee-usb",
|
|
.init = redbee_init,
|
|
.reset = redbee_reset,
|
|
.channel = INTERFACE_B,
|
|
},
|
|
{ .name = "lisa-l",
|
|
.init = lisa_l_init,
|
|
.reset = ftx23_reset,
|
|
.blink = lisa_l_blink,
|
|
.channel = INTERFACE_B,
|
|
},
|
|
{ .name = "flossjtag",
|
|
.init = flossjtag_init,
|
|
.reset = ftx23_reset,
|
|
.blink = flossjtag_blink,
|
|
},
|
|
{ .name = "xds100v2",
|
|
.init = xds100v2_init,
|
|
.reset = xds100v2_reset,
|
|
},
|
|
{ .name = "digilent-hs1",
|
|
.init = digilent_hs1_init,
|
|
.reset = digilent_hs1_reset,
|
|
.channel = INTERFACE_A,
|
|
},
|
|
{ .name = NULL, /* END OF TABLE */ },
|
|
};
|
|
|
|
/* bitmask used to drive nTRST; usually a GPIOLx signal */
|
|
static uint8_t nTRST;
|
|
static uint8_t nTRSTnOE;
|
|
/* bitmask used to drive nSRST; usually a GPIOLx signal */
|
|
static uint8_t nSRST;
|
|
static uint8_t nSRSTnOE;
|
|
|
|
/** the layout being used with this debug session */
|
|
static const struct ft2232_layout *layout;
|
|
|
|
/** default bitmask values driven on DBUS: TCK/TDI/TDO/TMS and GPIOL(0..4) */
|
|
static uint8_t low_output;
|
|
|
|
/* note that direction bit == 1 means that signal is an output */
|
|
|
|
/** default direction bitmask for DBUS: TCK/TDI/TDO/TMS and GPIOL(0..4) */
|
|
static uint8_t low_direction;
|
|
/** default value bitmask for CBUS GPIOH(0..4) */
|
|
static uint8_t high_output;
|
|
/** default direction bitmask for CBUS GPIOH(0..4) */
|
|
static uint8_t high_direction;
|
|
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
static FT_HANDLE ftdih;
|
|
static FT_DEVICE ftdi_device;
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
static struct ftdi_context ftdic;
|
|
static enum ftdi_chip_type ftdi_device;
|
|
#endif
|
|
|
|
static struct jtag_command *first_unsent; /* next command that has to be sent */
|
|
static int require_send;
|
|
|
|
/* http://urjtag.wiki.sourceforge.net/Cable + FT2232 says:
|
|
|
|
"There is a significant difference between libftdi and libftd2xx. The latter
|
|
one allows to schedule up to 64*64 bytes of result data while libftdi fails
|
|
with more than 4*64. As a consequence, the FT2232 driver is forced to
|
|
perform around 16x more USB transactions for long command streams with TDO
|
|
capture when running with libftdi."
|
|
|
|
No idea how we get
|
|
#define FT2232_BUFFER_SIZE 131072
|
|
a comment would have been nice.
|
|
*/
|
|
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
#define FT2232_BUFFER_READ_QUEUE_SIZE (64*64)
|
|
#else
|
|
#define FT2232_BUFFER_READ_QUEUE_SIZE (64*4)
|
|
#endif
|
|
|
|
#define FT2232_BUFFER_SIZE 131072
|
|
|
|
static uint8_t *ft2232_buffer;
|
|
static int ft2232_buffer_size;
|
|
static int ft2232_read_pointer;
|
|
static int ft2232_expect_read;
|
|
|
|
/**
|
|
* Function buffer_write
|
|
* writes a byte into the byte buffer, "ft2232_buffer", which must be sent later.
|
|
* @param val is the byte to send.
|
|
*/
|
|
static inline void buffer_write(uint8_t val)
|
|
{
|
|
assert(ft2232_buffer);
|
|
assert((unsigned) ft2232_buffer_size < (unsigned) FT2232_BUFFER_SIZE);
|
|
ft2232_buffer[ft2232_buffer_size++] = val;
|
|
}
|
|
|
|
/**
|
|
* Function buffer_read
|
|
* returns a byte from the byte buffer.
|
|
*/
|
|
static inline uint8_t buffer_read(void)
|
|
{
|
|
assert(ft2232_buffer);
|
|
assert(ft2232_read_pointer < ft2232_buffer_size);
|
|
return ft2232_buffer[ft2232_read_pointer++];
|
|
}
|
|
|
|
/**
|
|
* Clocks out \a bit_count bits on the TMS line, starting with the least
|
|
* significant bit of tms_bits and progressing to more significant bits.
|
|
* Rigorous state transition logging is done here via tap_set_state().
|
|
*
|
|
* @param mpsse_cmd One of the MPSSE TMS oriented commands such as
|
|
* 0x4b or 0x6b. See the MPSSE spec referenced above for their
|
|
* functionality. The MPSSE command "Clock Data to TMS/CS Pin (no Read)"
|
|
* is often used for this, 0x4b.
|
|
*
|
|
* @param tms_bits Holds the sequence of bits to send.
|
|
* @param tms_count Tells how many bits in the sequence.
|
|
* @param tdi_bit A single bit to pass on to TDI before the first TCK
|
|
* cycle and held static for the duration of TMS clocking.
|
|
*
|
|
* See the MPSSE spec referenced above.
|
|
*/
|
|
static void clock_tms(uint8_t mpsse_cmd, int tms_bits, int tms_count, bool tdi_bit)
|
|
{
|
|
uint8_t tms_byte;
|
|
int i;
|
|
int tms_ndx; /* bit index into tms_byte */
|
|
|
|
assert(tms_count > 0);
|
|
|
|
DEBUG_JTAG_IO("mpsse cmd=%02x, tms_bits = 0x%08x, bit_count=%d",
|
|
mpsse_cmd, tms_bits, tms_count);
|
|
|
|
for (tms_byte = tms_ndx = i = 0; i < tms_count; ++i, tms_bits >>= 1) {
|
|
bool bit = tms_bits & 1;
|
|
|
|
if (bit)
|
|
tms_byte |= (1 << tms_ndx);
|
|
|
|
/* always do state transitions in public view */
|
|
tap_set_state(tap_state_transition(tap_get_state(), bit));
|
|
|
|
/* we wrote a bit to tms_byte just above, increment bit index. if bit was zero
|
|
* also increment.
|
|
*/
|
|
++tms_ndx;
|
|
|
|
if (tms_ndx == 7 || i == tms_count-1) {
|
|
buffer_write(mpsse_cmd);
|
|
buffer_write(tms_ndx - 1);
|
|
|
|
/* Bit 7 of the byte is passed on to TDI/DO before the first TCK/SK of
|
|
* TMS/CS and is held static for the duration of TMS/CS clocking.
|
|
*/
|
|
buffer_write(tms_byte | (tdi_bit << 7));
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Function get_tms_buffer_requirements
|
|
* returns what clock_tms() will consume if called with
|
|
* same \a bit_count.
|
|
*/
|
|
static inline int get_tms_buffer_requirements(int bit_count)
|
|
{
|
|
return ((bit_count + 6)/7) * 3;
|
|
}
|
|
|
|
/**
|
|
* Function move_to_state
|
|
* moves the TAP controller from the current state to a
|
|
* \a goal_state through a path given by tap_get_tms_path(). State transition
|
|
* logging is performed by delegation to clock_tms().
|
|
*
|
|
* @param goal_state is the destination state for the move.
|
|
*/
|
|
static void move_to_state(tap_state_t goal_state)
|
|
{
|
|
tap_state_t start_state = tap_get_state();
|
|
|
|
/* goal_state is 1/2 of a tuple/pair of states which allow convenient
|
|
* lookup of the required TMS pattern to move to this state from the start state.
|
|
*/
|
|
|
|
/* do the 2 lookups */
|
|
int tms_bits = tap_get_tms_path(start_state, goal_state);
|
|
int tms_count = tap_get_tms_path_len(start_state, goal_state);
|
|
|
|
DEBUG_JTAG_IO("start=%s goal=%s", tap_state_name(start_state), tap_state_name(goal_state));
|
|
|
|
clock_tms(0x4b, tms_bits, tms_count, 0);
|
|
}
|
|
|
|
static int ft2232_write(uint8_t *buf, int size, uint32_t *bytes_written)
|
|
{
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
FT_STATUS status;
|
|
DWORD dw_bytes_written = 0;
|
|
status = FT_Write(ftdih, buf, size, &dw_bytes_written);
|
|
if (status != FT_OK) {
|
|
*bytes_written = dw_bytes_written;
|
|
LOG_ERROR("FT_Write returned: %s", ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
} else
|
|
*bytes_written = dw_bytes_written;
|
|
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
int retval = ftdi_write_data(&ftdic, buf, size);
|
|
if (retval < 0) {
|
|
*bytes_written = 0;
|
|
LOG_ERROR("ftdi_write_data: %s", ftdi_get_error_string(&ftdic));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
} else
|
|
*bytes_written = retval;
|
|
|
|
#endif
|
|
|
|
if (*bytes_written != (uint32_t)size)
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int ft2232_read(uint8_t *buf, uint32_t size, uint32_t *bytes_read)
|
|
{
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
DWORD dw_bytes_read;
|
|
FT_STATUS status;
|
|
int timeout = 5;
|
|
*bytes_read = 0;
|
|
|
|
while ((*bytes_read < size) && timeout--) {
|
|
status = FT_Read(ftdih, buf + *bytes_read, size -
|
|
*bytes_read, &dw_bytes_read);
|
|
if (status != FT_OK) {
|
|
*bytes_read = 0;
|
|
LOG_ERROR("FT_Read returned: %s", ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
*bytes_read += dw_bytes_read;
|
|
}
|
|
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
int retval;
|
|
int timeout = LIBFTDI_READ_RETRY_COUNT;
|
|
*bytes_read = 0;
|
|
|
|
while ((*bytes_read < size) && timeout--) {
|
|
retval = ftdi_read_data(&ftdic, buf + *bytes_read, size - *bytes_read);
|
|
if (retval < 0) {
|
|
*bytes_read = 0;
|
|
LOG_ERROR("ftdi_read_data: %s", ftdi_get_error_string(&ftdic));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
*bytes_read += retval;
|
|
}
|
|
|
|
#endif
|
|
|
|
if (*bytes_read < size) {
|
|
LOG_ERROR("couldn't read enough bytes from "
|
|
"FT2232 device (%i < %i)",
|
|
(unsigned)*bytes_read,
|
|
(unsigned)size);
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static bool ft2232_device_is_highspeed(void)
|
|
{
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
return (ftdi_device == FT_DEVICE_2232H) || (ftdi_device == FT_DEVICE_4232H)
|
|
#ifdef HAS_ENUM_FT232H
|
|
|| (ftdi_device == FT_DEVICE_232H)
|
|
#endif
|
|
;
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
return (ftdi_device == TYPE_2232H || ftdi_device == TYPE_4232H
|
|
#ifdef HAS_ENUM_FT232H
|
|
|| ftdi_device == TYPE_232H
|
|
#endif
|
|
);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Commands that only apply to the highspeed FTx232H devices (FT2232H, FT4232H, FT232H).
|
|
* See chapter 6 in http://www.ftdichip.com/Documents/AppNotes/
|
|
* AN_108_Command_Processor_for_MPSSE_and_MCU_Host_Bus_Emulation_Modes.pdf
|
|
*/
|
|
|
|
static int ftx232h_adaptive_clocking(bool enable)
|
|
{
|
|
uint8_t buf = enable ? 0x96 : 0x97;
|
|
LOG_DEBUG("%2.2x", buf);
|
|
|
|
uint32_t bytes_written;
|
|
int retval;
|
|
|
|
retval = ft2232_write(&buf, sizeof(buf), &bytes_written);
|
|
if (retval != ERROR_OK) {
|
|
LOG_ERROR("couldn't write command to %s adaptive clocking"
|
|
, enable ? "enable" : "disable");
|
|
return retval;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
/**
|
|
* Enable/disable the clk divide by 5 of the 60MHz master clock.
|
|
* This result in a JTAG clock speed range of 91.553Hz-6MHz
|
|
* respective 457.763Hz-30MHz.
|
|
*/
|
|
static int ftx232h_clk_divide_by_5(bool enable)
|
|
{
|
|
uint32_t bytes_written;
|
|
uint8_t buf = enable ? 0x8b : 0x8a;
|
|
|
|
if (ft2232_write(&buf, sizeof(buf), &bytes_written) != ERROR_OK) {
|
|
LOG_ERROR("couldn't write command to %s clk divide by 5"
|
|
, enable ? "enable" : "disable");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
ft2232_max_tck = enable ? FTDI_2232C_MAX_TCK : FTDI_x232H_MAX_TCK;
|
|
LOG_INFO("max TCK change to: %u kHz", ft2232_max_tck);
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int ft2232_speed(int speed)
|
|
{
|
|
uint8_t buf[3];
|
|
int retval;
|
|
uint32_t bytes_written;
|
|
|
|
retval = ERROR_OK;
|
|
bool enable_adaptive_clocking = (RTCK_SPEED == speed);
|
|
if (ft2232_device_is_highspeed())
|
|
retval = ftx232h_adaptive_clocking(enable_adaptive_clocking);
|
|
else if (enable_adaptive_clocking) {
|
|
LOG_ERROR("ft2232 device %lu does not support RTCK"
|
|
, (long unsigned int)ftdi_device);
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
if ((enable_adaptive_clocking) || (ERROR_OK != retval))
|
|
return retval;
|
|
|
|
buf[0] = 0x86; /* command "set divisor" */
|
|
buf[1] = speed & 0xff; /* valueL (0 = 6MHz, 1 = 3MHz, 2 = 2.0MHz, ...*/
|
|
buf[2] = (speed >> 8) & 0xff; /* valueH */
|
|
|
|
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
|
|
retval = ft2232_write(buf, sizeof(buf), &bytes_written);
|
|
if (retval != ERROR_OK) {
|
|
LOG_ERROR("couldn't set FT2232 TCK speed");
|
|
return retval;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int ft2232_speed_div(int speed, int *khz)
|
|
{
|
|
/* Take a look in the FT2232 manual,
|
|
* AN2232C-01 Command Processor for
|
|
* MPSSE and MCU Host Bus. Chapter 3.8 */
|
|
|
|
*khz = (RTCK_SPEED == speed) ? 0 : ft2232_max_tck / (1 + speed);
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int ft2232_khz(int khz, int *jtag_speed)
|
|
{
|
|
if (khz == 0) {
|
|
if (ft2232_device_is_highspeed()) {
|
|
*jtag_speed = RTCK_SPEED;
|
|
return ERROR_OK;
|
|
} else {
|
|
LOG_DEBUG("RCLK not supported");
|
|
return ERROR_FAIL;
|
|
}
|
|
}
|
|
|
|
/* Take a look in the FT2232 manual,
|
|
* AN2232C-01 Command Processor for
|
|
* MPSSE and MCU Host Bus. Chapter 3.8
|
|
*
|
|
* We will calc here with a multiplier
|
|
* of 10 for better rounding later. */
|
|
|
|
/* Calc speed, (ft2232_max_tck / khz) - 1
|
|
* Use 65000 for better rounding */
|
|
*jtag_speed = ((ft2232_max_tck*10) / khz) - 10;
|
|
|
|
/* Add 0.9 for rounding */
|
|
*jtag_speed += 9;
|
|
|
|
/* Calc real speed */
|
|
*jtag_speed = *jtag_speed / 10;
|
|
|
|
/* Check if speed is greater than 0 */
|
|
if (*jtag_speed < 0)
|
|
*jtag_speed = 0;
|
|
|
|
/* Check max value */
|
|
if (*jtag_speed > 0xFFFF)
|
|
*jtag_speed = 0xFFFF;
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static void ft2232_end_state(tap_state_t state)
|
|
{
|
|
if (tap_is_state_stable(state))
|
|
tap_set_end_state(state);
|
|
else {
|
|
LOG_ERROR("BUG: %s is not a stable end state", tap_state_name(state));
|
|
exit(-1);
|
|
}
|
|
}
|
|
|
|
static void ft2232_read_scan(enum scan_type type, uint8_t *buffer, int scan_size)
|
|
{
|
|
int num_bytes = (scan_size + 7) / 8;
|
|
int bits_left = scan_size;
|
|
int cur_byte = 0;
|
|
|
|
while (num_bytes-- > 1) {
|
|
buffer[cur_byte++] = buffer_read();
|
|
bits_left -= 8;
|
|
}
|
|
|
|
buffer[cur_byte] = 0x0;
|
|
|
|
/* There is one more partial byte left from the clock data in/out instructions */
|
|
if (bits_left > 1)
|
|
buffer[cur_byte] = buffer_read() >> 1;
|
|
/* This shift depends on the length of the
|
|
*clock data to tms instruction, insterted
|
|
*at end of the scan, now fixed to a two
|
|
*step transition in ft2232_add_scan */
|
|
buffer[cur_byte] = (buffer[cur_byte] | (((buffer_read()) << 1) & 0x80)) >> (8 - bits_left);
|
|
}
|
|
|
|
static void ft2232_debug_dump_buffer(void)
|
|
{
|
|
int i;
|
|
char line[256];
|
|
char *line_p = line;
|
|
|
|
for (i = 0; i < ft2232_buffer_size; i++) {
|
|
line_p += snprintf(line_p,
|
|
sizeof(line) - (line_p - line),
|
|
"%2.2x ",
|
|
ft2232_buffer[i]);
|
|
if (i % 16 == 15) {
|
|
LOG_DEBUG("%s", line);
|
|
line_p = line;
|
|
}
|
|
}
|
|
|
|
if (line_p != line)
|
|
LOG_DEBUG("%s", line);
|
|
}
|
|
|
|
static int ft2232_send_and_recv(struct jtag_command *first, struct jtag_command *last)
|
|
{
|
|
struct jtag_command *cmd;
|
|
uint8_t *buffer;
|
|
int scan_size;
|
|
enum scan_type type;
|
|
int retval;
|
|
uint32_t bytes_written = 0;
|
|
uint32_t bytes_read = 0;
|
|
|
|
#ifdef _DEBUG_USB_IO_
|
|
struct timeval start, inter, inter2, end;
|
|
struct timeval d_inter, d_inter2, d_end;
|
|
#endif
|
|
|
|
#ifdef _DEBUG_USB_COMMS_
|
|
LOG_DEBUG("write buffer (size %i):", ft2232_buffer_size);
|
|
ft2232_debug_dump_buffer();
|
|
#endif
|
|
|
|
#ifdef _DEBUG_USB_IO_
|
|
gettimeofday(&start, NULL);
|
|
#endif
|
|
|
|
retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written);
|
|
if (retval != ERROR_OK) {
|
|
LOG_ERROR("couldn't write MPSSE commands to FT2232");
|
|
return retval;
|
|
}
|
|
|
|
#ifdef _DEBUG_USB_IO_
|
|
gettimeofday(&inter, NULL);
|
|
#endif
|
|
|
|
if (ft2232_expect_read) {
|
|
/* FIXME this "timeout" is never changed ... */
|
|
int timeout = LIBFTDI_READ_RETRY_COUNT;
|
|
ft2232_buffer_size = 0;
|
|
|
|
#ifdef _DEBUG_USB_IO_
|
|
gettimeofday(&inter2, NULL);
|
|
#endif
|
|
|
|
retval = ft2232_read(ft2232_buffer, ft2232_expect_read, &bytes_read);
|
|
if (retval != ERROR_OK) {
|
|
LOG_ERROR("couldn't read from FT2232");
|
|
return retval;
|
|
}
|
|
|
|
#ifdef _DEBUG_USB_IO_
|
|
gettimeofday(&end, NULL);
|
|
|
|
timeval_subtract(&d_inter, &inter, &start);
|
|
timeval_subtract(&d_inter2, &inter2, &start);
|
|
timeval_subtract(&d_end, &end, &start);
|
|
|
|
LOG_INFO("inter: %u.%06u, inter2: %u.%06u end: %u.%06u",
|
|
(unsigned)d_inter.tv_sec, (unsigned)d_inter.tv_usec,
|
|
(unsigned)d_inter2.tv_sec, (unsigned)d_inter2.tv_usec,
|
|
(unsigned)d_end.tv_sec, (unsigned)d_end.tv_usec);
|
|
#endif
|
|
|
|
ft2232_buffer_size = bytes_read;
|
|
|
|
if (ft2232_expect_read != ft2232_buffer_size) {
|
|
LOG_ERROR("ft2232_expect_read (%i) != "
|
|
"ft2232_buffer_size (%i) "
|
|
"(%i retries)",
|
|
ft2232_expect_read,
|
|
ft2232_buffer_size,
|
|
LIBFTDI_READ_RETRY_COUNT - timeout);
|
|
ft2232_debug_dump_buffer();
|
|
|
|
exit(-1);
|
|
}
|
|
|
|
#ifdef _DEBUG_USB_COMMS_
|
|
LOG_DEBUG("read buffer (%i retries): %i bytes",
|
|
LIBFTDI_READ_RETRY_COUNT - timeout,
|
|
ft2232_buffer_size);
|
|
ft2232_debug_dump_buffer();
|
|
#endif
|
|
}
|
|
|
|
ft2232_expect_read = 0;
|
|
ft2232_read_pointer = 0;
|
|
|
|
/* return ERROR_OK, unless a jtag_read_buffer returns a failed check
|
|
* that wasn't handled by a caller-provided error handler
|
|
*/
|
|
retval = ERROR_OK;
|
|
|
|
cmd = first;
|
|
while (cmd != last) {
|
|
switch (cmd->type) {
|
|
case JTAG_SCAN:
|
|
type = jtag_scan_type(cmd->cmd.scan);
|
|
if (type != SCAN_OUT) {
|
|
scan_size = jtag_scan_size(cmd->cmd.scan);
|
|
buffer = calloc(DIV_ROUND_UP(scan_size, 8), 1);
|
|
ft2232_read_scan(type, buffer, scan_size);
|
|
if (jtag_read_buffer(buffer, cmd->cmd.scan) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
free(buffer);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
cmd = cmd->next;
|
|
}
|
|
|
|
ft2232_buffer_size = 0;
|
|
|
|
return retval;
|
|
}
|
|
|
|
/**
|
|
* Function ft2232_add_pathmove
|
|
* moves the TAP controller from the current state to a new state through the
|
|
* given path, where path is an array of tap_state_t's.
|
|
*
|
|
* @param path is an array of tap_stat_t which gives the states to traverse through
|
|
* ending with the last state at path[num_states-1]
|
|
* @param num_states is the count of state steps to move through
|
|
*/
|
|
static void ft2232_add_pathmove(tap_state_t *path, int num_states)
|
|
{
|
|
int state_count = 0;
|
|
|
|
assert((unsigned) num_states <= 32u); /* tms_bits only holds 32 bits */
|
|
|
|
DEBUG_JTAG_IO("-");
|
|
|
|
/* this loop verifies that the path is legal and logs each state in the path */
|
|
while (num_states) {
|
|
unsigned char tms_byte = 0; /* zero this on each MPSSE batch */
|
|
int bit_count = 0;
|
|
int num_states_batch = num_states > 7 ? 7 : num_states;
|
|
|
|
/* command "Clock Data to TMS/CS Pin (no Read)" */
|
|
buffer_write(0x4b);
|
|
|
|
/* number of states remaining */
|
|
buffer_write(num_states_batch - 1);
|
|
|
|
while (num_states_batch--) {
|
|
/* either TMS=0 or TMS=1 must work ... */
|
|
if (tap_state_transition(tap_get_state(), false) == path[state_count])
|
|
buf_set_u32(&tms_byte, bit_count++, 1, 0x0);
|
|
else if (tap_state_transition(tap_get_state(), true) == path[state_count])
|
|
buf_set_u32(&tms_byte, bit_count++, 1, 0x1);
|
|
|
|
/* ... or else the caller goofed BADLY */
|
|
else {
|
|
LOG_ERROR("BUG: %s -> %s isn't a valid "
|
|
"TAP state transition",
|
|
tap_state_name(tap_get_state()),
|
|
tap_state_name(path[state_count]));
|
|
exit(-1);
|
|
}
|
|
|
|
tap_set_state(path[state_count]);
|
|
state_count++;
|
|
num_states--;
|
|
}
|
|
|
|
buffer_write(tms_byte);
|
|
}
|
|
tap_set_end_state(tap_get_state());
|
|
}
|
|
|
|
static void ft2232_add_scan(bool ir_scan, enum scan_type type, uint8_t *buffer, int scan_size)
|
|
{
|
|
int num_bytes = (scan_size + 7) / 8;
|
|
int bits_left = scan_size;
|
|
int cur_byte = 0;
|
|
int last_bit;
|
|
|
|
if (!ir_scan) {
|
|
if (tap_get_state() != TAP_DRSHIFT)
|
|
move_to_state(TAP_DRSHIFT);
|
|
} else {
|
|
if (tap_get_state() != TAP_IRSHIFT)
|
|
move_to_state(TAP_IRSHIFT);
|
|
}
|
|
|
|
/* add command for complete bytes */
|
|
while (num_bytes > 1) {
|
|
int thisrun_bytes;
|
|
if (type == SCAN_IO) {
|
|
/* Clock Data Bytes In and Out LSB First */
|
|
buffer_write(0x39);
|
|
/* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */
|
|
} else if (type == SCAN_OUT) {
|
|
/* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */
|
|
buffer_write(0x19);
|
|
/* LOG_DEBUG("added TDI bytes (o)"); */
|
|
} else if (type == SCAN_IN) {
|
|
/* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */
|
|
buffer_write(0x28);
|
|
/* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */
|
|
}
|
|
|
|
thisrun_bytes = (num_bytes > 65537) ? 65536 : (num_bytes - 1);
|
|
num_bytes -= thisrun_bytes;
|
|
|
|
buffer_write((uint8_t) (thisrun_bytes - 1));
|
|
buffer_write((uint8_t) ((thisrun_bytes - 1) >> 8));
|
|
|
|
if (type != SCAN_IN) {
|
|
/* add complete bytes */
|
|
while (thisrun_bytes-- > 0) {
|
|
buffer_write(buffer[cur_byte++]);
|
|
bits_left -= 8;
|
|
}
|
|
} else /* (type == SCAN_IN) */
|
|
bits_left -= 8 * (thisrun_bytes);
|
|
}
|
|
|
|
/* the most signifcant bit is scanned during TAP movement */
|
|
if (type != SCAN_IN)
|
|
last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1;
|
|
else
|
|
last_bit = 0;
|
|
|
|
/* process remaining bits but the last one */
|
|
if (bits_left > 1) {
|
|
if (type == SCAN_IO) {
|
|
/* Clock Data Bits In and Out LSB First */
|
|
buffer_write(0x3b);
|
|
/* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
|
|
} else if (type == SCAN_OUT) {
|
|
/* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
|
|
buffer_write(0x1b);
|
|
/* LOG_DEBUG("added TDI bits (o)"); */
|
|
} else if (type == SCAN_IN) {
|
|
/* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
|
|
buffer_write(0x2a);
|
|
/* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
|
|
}
|
|
|
|
buffer_write(bits_left - 2);
|
|
if (type != SCAN_IN)
|
|
buffer_write(buffer[cur_byte]);
|
|
}
|
|
|
|
if ((ir_scan && (tap_get_end_state() == TAP_IRSHIFT))
|
|
|| (!ir_scan && (tap_get_end_state() == TAP_DRSHIFT))) {
|
|
if (type == SCAN_IO) {
|
|
/* Clock Data Bits In and Out LSB First */
|
|
buffer_write(0x3b);
|
|
/* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
|
|
} else if (type == SCAN_OUT) {
|
|
/* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
|
|
buffer_write(0x1b);
|
|
/* LOG_DEBUG("added TDI bits (o)"); */
|
|
} else if (type == SCAN_IN) {
|
|
/* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
|
|
buffer_write(0x2a);
|
|
/* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
|
|
}
|
|
buffer_write(0x0);
|
|
buffer_write(last_bit);
|
|
} else {
|
|
int tms_bits;
|
|
int tms_count;
|
|
uint8_t mpsse_cmd;
|
|
|
|
/* move from Shift-IR/DR to end state */
|
|
if (type != SCAN_OUT) {
|
|
/* We always go to the PAUSE state in two step at the end of an IN or IO
|
|
*scan
|
|
* This must be coordinated with the bit shifts in ft2232_read_scan */
|
|
tms_bits = 0x01;
|
|
tms_count = 2;
|
|
/* Clock Data to TMS/CS Pin with Read */
|
|
mpsse_cmd = 0x6b;
|
|
} else {
|
|
tms_bits = tap_get_tms_path(tap_get_state(), tap_get_end_state());
|
|
tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
|
|
/* Clock Data to TMS/CS Pin (no Read) */
|
|
mpsse_cmd = 0x4b;
|
|
}
|
|
|
|
DEBUG_JTAG_IO("finish %s", (type == SCAN_OUT) ? "without read" : "via PAUSE");
|
|
clock_tms(mpsse_cmd, tms_bits, tms_count, last_bit);
|
|
}
|
|
|
|
if (tap_get_state() != tap_get_end_state())
|
|
move_to_state(tap_get_end_state());
|
|
}
|
|
|
|
static int ft2232_large_scan(struct scan_command *cmd,
|
|
enum scan_type type,
|
|
uint8_t *buffer,
|
|
int scan_size)
|
|
{
|
|
int num_bytes = (scan_size + 7) / 8;
|
|
int bits_left = scan_size;
|
|
int cur_byte = 0;
|
|
int last_bit;
|
|
uint8_t *receive_buffer = malloc(DIV_ROUND_UP(scan_size, 8));
|
|
uint8_t *receive_pointer = receive_buffer;
|
|
uint32_t bytes_written;
|
|
uint32_t bytes_read;
|
|
int retval;
|
|
int thisrun_read = 0;
|
|
|
|
if (cmd->ir_scan) {
|
|
LOG_ERROR("BUG: large IR scans are not supported");
|
|
exit(-1);
|
|
}
|
|
|
|
if (tap_get_state() != TAP_DRSHIFT)
|
|
move_to_state(TAP_DRSHIFT);
|
|
|
|
retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written);
|
|
if (retval != ERROR_OK) {
|
|
LOG_ERROR("couldn't write MPSSE commands to FT2232");
|
|
exit(-1);
|
|
}
|
|
LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
|
|
ft2232_buffer_size, (int)bytes_written);
|
|
ft2232_buffer_size = 0;
|
|
|
|
/* add command for complete bytes */
|
|
while (num_bytes > 1) {
|
|
int thisrun_bytes;
|
|
|
|
if (type == SCAN_IO) {
|
|
/* Clock Data Bytes In and Out LSB First */
|
|
buffer_write(0x39);
|
|
/* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */
|
|
} else if (type == SCAN_OUT) {
|
|
/* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */
|
|
buffer_write(0x19);
|
|
/* LOG_DEBUG("added TDI bytes (o)"); */
|
|
} else if (type == SCAN_IN) {
|
|
/* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */
|
|
buffer_write(0x28);
|
|
/* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */
|
|
}
|
|
|
|
thisrun_bytes = (num_bytes > 65537) ? 65536 : (num_bytes - 1);
|
|
thisrun_read = thisrun_bytes;
|
|
num_bytes -= thisrun_bytes;
|
|
buffer_write((uint8_t) (thisrun_bytes - 1));
|
|
buffer_write((uint8_t) ((thisrun_bytes - 1) >> 8));
|
|
|
|
if (type != SCAN_IN) {
|
|
/* add complete bytes */
|
|
while (thisrun_bytes-- > 0) {
|
|
buffer_write(buffer[cur_byte]);
|
|
cur_byte++;
|
|
bits_left -= 8;
|
|
}
|
|
} else /* (type == SCAN_IN) */
|
|
bits_left -= 8 * (thisrun_bytes);
|
|
|
|
retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written);
|
|
if (retval != ERROR_OK) {
|
|
LOG_ERROR("couldn't write MPSSE commands to FT2232");
|
|
exit(-1);
|
|
}
|
|
LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
|
|
ft2232_buffer_size,
|
|
(int)bytes_written);
|
|
ft2232_buffer_size = 0;
|
|
|
|
if (type != SCAN_OUT) {
|
|
retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read);
|
|
if (retval != ERROR_OK) {
|
|
LOG_ERROR("couldn't read from FT2232");
|
|
exit(-1);
|
|
}
|
|
LOG_DEBUG("thisrun_read: %i, bytes_read: %i",
|
|
thisrun_read,
|
|
(int)bytes_read);
|
|
receive_pointer += bytes_read;
|
|
}
|
|
}
|
|
|
|
thisrun_read = 0;
|
|
|
|
/* the most signifcant bit is scanned during TAP movement */
|
|
if (type != SCAN_IN)
|
|
last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1;
|
|
else
|
|
last_bit = 0;
|
|
|
|
/* process remaining bits but the last one */
|
|
if (bits_left > 1) {
|
|
if (type == SCAN_IO) {
|
|
/* Clock Data Bits In and Out LSB First */
|
|
buffer_write(0x3b);
|
|
/* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
|
|
} else if (type == SCAN_OUT) {
|
|
/* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
|
|
buffer_write(0x1b);
|
|
/* LOG_DEBUG("added TDI bits (o)"); */
|
|
} else if (type == SCAN_IN) {
|
|
/* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
|
|
buffer_write(0x2a);
|
|
/* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
|
|
}
|
|
buffer_write(bits_left - 2);
|
|
if (type != SCAN_IN)
|
|
buffer_write(buffer[cur_byte]);
|
|
|
|
if (type != SCAN_OUT)
|
|
thisrun_read += 2;
|
|
}
|
|
|
|
if (tap_get_end_state() == TAP_DRSHIFT) {
|
|
if (type == SCAN_IO) {
|
|
/* Clock Data Bits In and Out LSB First */
|
|
buffer_write(0x3b);
|
|
/* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
|
|
} else if (type == SCAN_OUT) {
|
|
/* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
|
|
buffer_write(0x1b);
|
|
/* LOG_DEBUG("added TDI bits (o)"); */
|
|
} else if (type == SCAN_IN) {
|
|
/* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
|
|
buffer_write(0x2a);
|
|
/* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
|
|
}
|
|
buffer_write(0x0);
|
|
buffer_write(last_bit);
|
|
} else {
|
|
int tms_bits = tap_get_tms_path(tap_get_state(), tap_get_end_state());
|
|
int tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
|
|
uint8_t mpsse_cmd;
|
|
|
|
/* move from Shift-IR/DR to end state */
|
|
if (type != SCAN_OUT) {
|
|
/* Clock Data to TMS/CS Pin with Read */
|
|
mpsse_cmd = 0x6b;
|
|
/* LOG_DEBUG("added TMS scan (read)"); */
|
|
} else {
|
|
/* Clock Data to TMS/CS Pin (no Read) */
|
|
mpsse_cmd = 0x4b;
|
|
/* LOG_DEBUG("added TMS scan (no read)"); */
|
|
}
|
|
|
|
DEBUG_JTAG_IO("finish, %s", (type == SCAN_OUT) ? "no read" : "read");
|
|
clock_tms(mpsse_cmd, tms_bits, tms_count, last_bit);
|
|
}
|
|
|
|
if (type != SCAN_OUT)
|
|
thisrun_read += 1;
|
|
|
|
retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written);
|
|
if (retval != ERROR_OK) {
|
|
LOG_ERROR("couldn't write MPSSE commands to FT2232");
|
|
exit(-1);
|
|
}
|
|
LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
|
|
ft2232_buffer_size,
|
|
(int)bytes_written);
|
|
ft2232_buffer_size = 0;
|
|
|
|
if (type != SCAN_OUT) {
|
|
retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read);
|
|
if (retval != ERROR_OK) {
|
|
LOG_ERROR("couldn't read from FT2232");
|
|
exit(-1);
|
|
}
|
|
LOG_DEBUG("thisrun_read: %i, bytes_read: %i",
|
|
thisrun_read,
|
|
(int)bytes_read);
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int ft2232_predict_scan_out(int scan_size, enum scan_type type)
|
|
{
|
|
int predicted_size = 3;
|
|
int num_bytes = (scan_size - 1) / 8;
|
|
|
|
if (tap_get_state() != TAP_DRSHIFT)
|
|
predicted_size += get_tms_buffer_requirements(
|
|
tap_get_tms_path_len(tap_get_state(), TAP_DRSHIFT));
|
|
|
|
if (type == SCAN_IN) { /* only from device to host */
|
|
/* complete bytes */
|
|
predicted_size += DIV_ROUND_UP(num_bytes, 65536) * 3;
|
|
|
|
/* remaining bits - 1 (up to 7) */
|
|
predicted_size += ((scan_size - 1) % 8) ? 2 : 0;
|
|
} else {/* host to device, or bidirectional
|
|
* complete bytes */
|
|
predicted_size += num_bytes + DIV_ROUND_UP(num_bytes, 65536) * 3;
|
|
|
|
/* remaining bits -1 (up to 7) */
|
|
predicted_size += ((scan_size - 1) % 8) ? 3 : 0;
|
|
}
|
|
|
|
return predicted_size;
|
|
}
|
|
|
|
static int ft2232_predict_scan_in(int scan_size, enum scan_type type)
|
|
{
|
|
int predicted_size = 0;
|
|
|
|
if (type != SCAN_OUT) {
|
|
/* complete bytes */
|
|
predicted_size +=
|
|
(DIV_ROUND_UP(scan_size, 8) > 1) ? (DIV_ROUND_UP(scan_size, 8) - 1) : 0;
|
|
|
|
/* remaining bits - 1 */
|
|
predicted_size += ((scan_size - 1) % 8) ? 1 : 0;
|
|
|
|
/* last bit (from TMS scan) */
|
|
predicted_size += 1;
|
|
}
|
|
|
|
/* LOG_DEBUG("scan_size: %i, predicted_size: %i", scan_size, predicted_size); */
|
|
|
|
return predicted_size;
|
|
}
|
|
|
|
/* semi-generic FT2232/FT4232 reset code */
|
|
static void ftx23_reset(int trst, int srst)
|
|
{
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
if (trst == 1) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
low_direction |= nTRSTnOE; /* switch to output pin (output is low) */
|
|
else
|
|
low_output &= ~nTRST; /* switch output low */
|
|
} else if (trst == 0) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
low_direction &= ~nTRSTnOE; /* switch to input pin (high-Z + internal
|
|
*and external pullup) */
|
|
else
|
|
low_output |= nTRST; /* switch output high */
|
|
}
|
|
|
|
if (srst == 1) {
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
low_output &= ~nSRST; /* switch output low */
|
|
else
|
|
low_direction |= nSRSTnOE; /* switch to output pin (output is low) */
|
|
} else if (srst == 0) {
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
low_output |= nSRST; /* switch output high */
|
|
else
|
|
low_direction &= ~nSRSTnOE; /* switch to input pin (high-Z) */
|
|
}
|
|
|
|
/* command "set data bits low byte" */
|
|
buffer_write(0x80);
|
|
buffer_write(low_output);
|
|
buffer_write(low_direction);
|
|
}
|
|
|
|
static void jtagkey_reset(int trst, int srst)
|
|
{
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
if (trst == 1) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
high_output &= ~nTRSTnOE;
|
|
else
|
|
high_output &= ~nTRST;
|
|
} else if (trst == 0) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
high_output |= nTRSTnOE;
|
|
else
|
|
high_output |= nTRST;
|
|
}
|
|
|
|
if (srst == 1) {
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
high_output &= ~nSRST;
|
|
else
|
|
high_output &= ~nSRSTnOE;
|
|
} else if (srst == 0) {
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
high_output |= nSRST;
|
|
else
|
|
high_output |= nSRSTnOE;
|
|
}
|
|
|
|
/* command "set data bits high byte" */
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
|
|
trst,
|
|
srst,
|
|
high_output,
|
|
high_direction);
|
|
}
|
|
|
|
static void olimex_jtag_reset(int trst, int srst)
|
|
{
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
if (trst == 1) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
high_output &= ~nTRSTnOE;
|
|
else
|
|
high_output &= ~nTRST;
|
|
} else if (trst == 0) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
high_output |= nTRSTnOE;
|
|
else
|
|
high_output |= nTRST;
|
|
}
|
|
|
|
if (srst == 1)
|
|
high_output |= nSRST;
|
|
else if (srst == 0)
|
|
high_output &= ~nSRST;
|
|
|
|
/* command "set data bits high byte" */
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
|
|
trst,
|
|
srst,
|
|
high_output,
|
|
high_direction);
|
|
}
|
|
|
|
static void axm0432_jtag_reset(int trst, int srst)
|
|
{
|
|
if (trst == 1) {
|
|
tap_set_state(TAP_RESET);
|
|
high_output &= ~nTRST;
|
|
} else if (trst == 0)
|
|
high_output |= nTRST;
|
|
|
|
if (srst == 1)
|
|
high_output &= ~nSRST;
|
|
else if (srst == 0)
|
|
high_output |= nSRST;
|
|
|
|
/* command "set data bits low byte" */
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
|
|
trst,
|
|
srst,
|
|
high_output,
|
|
high_direction);
|
|
}
|
|
|
|
static void flyswatter_reset(int trst, int srst)
|
|
{
|
|
if (trst == 1)
|
|
low_output &= ~nTRST;
|
|
else if (trst == 0)
|
|
low_output |= nTRST;
|
|
|
|
if (srst == 1)
|
|
low_output |= nSRST;
|
|
else if (srst == 0)
|
|
low_output &= ~nSRST;
|
|
|
|
/* command "set data bits low byte" */
|
|
buffer_write(0x80);
|
|
buffer_write(low_output);
|
|
buffer_write(low_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x",
|
|
trst,
|
|
srst,
|
|
low_output,
|
|
low_direction);
|
|
}
|
|
|
|
static void flyswatter1_reset(int trst, int srst)
|
|
{
|
|
flyswatter_reset(trst, srst);
|
|
}
|
|
|
|
static void flyswatter2_reset(int trst, int srst)
|
|
{
|
|
flyswatter_reset(trst, !srst);
|
|
}
|
|
|
|
static void minimodule_reset(int trst, int srst)
|
|
{
|
|
if (srst == 1)
|
|
low_output &= ~nSRST;
|
|
else if (srst == 0)
|
|
low_output |= nSRST;
|
|
|
|
/* command "set data bits low byte" */
|
|
buffer_write(0x80);
|
|
buffer_write(low_output);
|
|
buffer_write(low_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x",
|
|
trst,
|
|
srst,
|
|
low_output,
|
|
low_direction);
|
|
}
|
|
|
|
static void turtle_reset(int trst, int srst)
|
|
{
|
|
trst = trst;
|
|
|
|
if (srst == 1)
|
|
low_output |= nSRST;
|
|
else if (srst == 0)
|
|
low_output &= ~nSRST;
|
|
|
|
/* command "set data bits low byte" */
|
|
buffer_write(0x80);
|
|
buffer_write(low_output);
|
|
buffer_write(low_direction);
|
|
LOG_DEBUG("srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x",
|
|
srst,
|
|
low_output,
|
|
low_direction);
|
|
}
|
|
|
|
static void comstick_reset(int trst, int srst)
|
|
{
|
|
if (trst == 1)
|
|
high_output &= ~nTRST;
|
|
else if (trst == 0)
|
|
high_output |= nTRST;
|
|
|
|
if (srst == 1)
|
|
high_output &= ~nSRST;
|
|
else if (srst == 0)
|
|
high_output |= nSRST;
|
|
|
|
/* command "set data bits high byte" */
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
|
|
trst,
|
|
srst,
|
|
high_output,
|
|
high_direction);
|
|
}
|
|
|
|
static void stm32stick_reset(int trst, int srst)
|
|
{
|
|
if (trst == 1)
|
|
high_output &= ~nTRST;
|
|
else if (trst == 0)
|
|
high_output |= nTRST;
|
|
|
|
if (srst == 1)
|
|
low_output &= ~nSRST;
|
|
else if (srst == 0)
|
|
low_output |= nSRST;
|
|
|
|
/* command "set data bits low byte" */
|
|
buffer_write(0x80);
|
|
buffer_write(low_output);
|
|
buffer_write(low_direction);
|
|
|
|
/* command "set data bits high byte" */
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
|
|
trst,
|
|
srst,
|
|
high_output,
|
|
high_direction);
|
|
}
|
|
|
|
static void sheevaplug_reset(int trst, int srst)
|
|
{
|
|
if (trst == 1)
|
|
high_output &= ~nTRST;
|
|
else if (trst == 0)
|
|
high_output |= nTRST;
|
|
|
|
if (srst == 1)
|
|
high_output &= ~nSRSTnOE;
|
|
else if (srst == 0)
|
|
high_output |= nSRSTnOE;
|
|
|
|
/* command "set data bits high byte" */
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
|
|
trst,
|
|
srst,
|
|
high_output,
|
|
high_direction);
|
|
}
|
|
|
|
static void redbee_reset(int trst, int srst)
|
|
{
|
|
if (trst == 1) {
|
|
tap_set_state(TAP_RESET);
|
|
high_output &= ~nTRST;
|
|
} else if (trst == 0)
|
|
high_output |= nTRST;
|
|
|
|
if (srst == 1)
|
|
high_output &= ~nSRST;
|
|
else if (srst == 0)
|
|
high_output |= nSRST;
|
|
|
|
/* command "set data bits low byte" */
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, "
|
|
"high_direction: 0x%2.2x", trst, srst, high_output,
|
|
high_direction);
|
|
}
|
|
|
|
static void xds100v2_reset(int trst, int srst)
|
|
{
|
|
if (trst == 1) {
|
|
tap_set_state(TAP_RESET);
|
|
high_output &= ~nTRST;
|
|
} else if (trst == 0)
|
|
high_output |= nTRST;
|
|
|
|
if (srst == 1)
|
|
high_output |= nSRST;
|
|
else if (srst == 0)
|
|
high_output &= ~nSRST;
|
|
|
|
/* command "set data bits low byte" */
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, "
|
|
"high_direction: 0x%2.2x", trst, srst, high_output,
|
|
high_direction);
|
|
}
|
|
|
|
static int ft2232_execute_runtest(struct jtag_command *cmd)
|
|
{
|
|
int retval;
|
|
int i;
|
|
int predicted_size = 0;
|
|
retval = ERROR_OK;
|
|
|
|
DEBUG_JTAG_IO("runtest %i cycles, end in %s",
|
|
cmd->cmd.runtest->num_cycles,
|
|
tap_state_name(cmd->cmd.runtest->end_state));
|
|
|
|
/* only send the maximum buffer size that FT2232C can handle */
|
|
predicted_size = 0;
|
|
if (tap_get_state() != TAP_IDLE)
|
|
predicted_size += 3;
|
|
predicted_size += 3 * DIV_ROUND_UP(cmd->cmd.runtest->num_cycles, 7);
|
|
if (cmd->cmd.runtest->end_state != TAP_IDLE)
|
|
predicted_size += 3;
|
|
if (tap_get_end_state() != TAP_IDLE)
|
|
predicted_size += 3;
|
|
if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) {
|
|
if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
require_send = 0;
|
|
first_unsent = cmd;
|
|
}
|
|
if (tap_get_state() != TAP_IDLE) {
|
|
move_to_state(TAP_IDLE);
|
|
require_send = 1;
|
|
}
|
|
i = cmd->cmd.runtest->num_cycles;
|
|
while (i > 0) {
|
|
/* there are no state transitions in this code, so omit state tracking */
|
|
|
|
/* command "Clock Data to TMS/CS Pin (no Read)" */
|
|
buffer_write(0x4b);
|
|
|
|
/* scan 7 bits */
|
|
buffer_write((i > 7) ? 6 : (i - 1));
|
|
|
|
/* TMS data bits */
|
|
buffer_write(0x0);
|
|
|
|
i -= (i > 7) ? 7 : i;
|
|
/* LOG_DEBUG("added TMS scan (no read)"); */
|
|
}
|
|
|
|
ft2232_end_state(cmd->cmd.runtest->end_state);
|
|
|
|
if (tap_get_state() != tap_get_end_state())
|
|
move_to_state(tap_get_end_state());
|
|
|
|
require_send = 1;
|
|
DEBUG_JTAG_IO("runtest: %i, end in %s",
|
|
cmd->cmd.runtest->num_cycles,
|
|
tap_state_name(tap_get_end_state()));
|
|
return retval;
|
|
}
|
|
|
|
static int ft2232_execute_statemove(struct jtag_command *cmd)
|
|
{
|
|
int predicted_size = 0;
|
|
int retval = ERROR_OK;
|
|
|
|
DEBUG_JTAG_IO("statemove end in %s",
|
|
tap_state_name(cmd->cmd.statemove->end_state));
|
|
|
|
/* only send the maximum buffer size that FT2232C can handle */
|
|
predicted_size = 3;
|
|
if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) {
|
|
if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
require_send = 0;
|
|
first_unsent = cmd;
|
|
}
|
|
ft2232_end_state(cmd->cmd.statemove->end_state);
|
|
|
|
/* For TAP_RESET, ignore the current recorded state. It's often
|
|
* wrong at server startup, and this transation is critical whenever
|
|
* it's requested.
|
|
*/
|
|
if (tap_get_end_state() == TAP_RESET) {
|
|
clock_tms(0x4b, 0xff, 5, 0);
|
|
require_send = 1;
|
|
|
|
/* shortest-path move to desired end state */
|
|
} else if (tap_get_state() != tap_get_end_state()) {
|
|
move_to_state(tap_get_end_state());
|
|
require_send = 1;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
/**
|
|
* Clock a bunch of TMS (or SWDIO) transitions, to change the JTAG
|
|
* (or SWD) state machine.
|
|
*/
|
|
static int ft2232_execute_tms(struct jtag_command *cmd)
|
|
{
|
|
int retval = ERROR_OK;
|
|
unsigned num_bits = cmd->cmd.tms->num_bits;
|
|
const uint8_t *bits = cmd->cmd.tms->bits;
|
|
unsigned count;
|
|
|
|
DEBUG_JTAG_IO("TMS: %d bits", num_bits);
|
|
|
|
/* only send the maximum buffer size that FT2232C can handle */
|
|
count = 3 * DIV_ROUND_UP(num_bits, 4);
|
|
if (ft2232_buffer_size + 3*count + 1 > FT2232_BUFFER_SIZE) {
|
|
if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
|
|
require_send = 0;
|
|
first_unsent = cmd;
|
|
}
|
|
|
|
/* Shift out in batches of at most 6 bits; there's a report of an
|
|
* FT2232 bug in this area, where shifting exactly 7 bits can make
|
|
* problems with TMS signaling for the last clock cycle:
|
|
*
|
|
* http://developer.intra2net.com/mailarchive/html/
|
|
* libftdi/2009/msg00292.html
|
|
*
|
|
* Command 0x4b is: "Clock Data to TMS/CS Pin (no Read)"
|
|
*
|
|
* Note that pathmoves in JTAG are not often seven bits, so that
|
|
* isn't a particularly likely situation outside of "special"
|
|
* signaling such as switching between JTAG and SWD modes.
|
|
*/
|
|
while (num_bits) {
|
|
if (num_bits <= 6) {
|
|
buffer_write(0x4b);
|
|
buffer_write(num_bits - 1);
|
|
buffer_write(*bits & 0x3f);
|
|
break;
|
|
}
|
|
|
|
/* Yes, this is lazy ... we COULD shift out more data
|
|
* bits per operation, but doing it in nybbles is easy
|
|
*/
|
|
buffer_write(0x4b);
|
|
buffer_write(3);
|
|
buffer_write(*bits & 0xf);
|
|
num_bits -= 4;
|
|
|
|
count = (num_bits > 4) ? 4 : num_bits;
|
|
|
|
buffer_write(0x4b);
|
|
buffer_write(count - 1);
|
|
buffer_write((*bits >> 4) & 0xf);
|
|
num_bits -= count;
|
|
|
|
bits++;
|
|
}
|
|
|
|
require_send = 1;
|
|
return retval;
|
|
}
|
|
|
|
static int ft2232_execute_pathmove(struct jtag_command *cmd)
|
|
{
|
|
int predicted_size = 0;
|
|
int retval = ERROR_OK;
|
|
|
|
tap_state_t *path = cmd->cmd.pathmove->path;
|
|
int num_states = cmd->cmd.pathmove->num_states;
|
|
|
|
DEBUG_JTAG_IO("pathmove: %i states, current: %s end: %s", num_states,
|
|
tap_state_name(tap_get_state()),
|
|
tap_state_name(path[num_states-1]));
|
|
|
|
/* only send the maximum buffer size that FT2232C can handle */
|
|
predicted_size = 3 * DIV_ROUND_UP(num_states, 7);
|
|
if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) {
|
|
if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
|
|
require_send = 0;
|
|
first_unsent = cmd;
|
|
}
|
|
|
|
ft2232_add_pathmove(path, num_states);
|
|
require_send = 1;
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int ft2232_execute_scan(struct jtag_command *cmd)
|
|
{
|
|
uint8_t *buffer;
|
|
int scan_size; /* size of IR or DR scan */
|
|
int predicted_size = 0;
|
|
int retval = ERROR_OK;
|
|
|
|
enum scan_type type = jtag_scan_type(cmd->cmd.scan);
|
|
|
|
DEBUG_JTAG_IO("%s type:%d", cmd->cmd.scan->ir_scan ? "IRSCAN" : "DRSCAN", type);
|
|
|
|
scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer);
|
|
|
|
predicted_size = ft2232_predict_scan_out(scan_size, type);
|
|
if ((predicted_size + 1) > FT2232_BUFFER_SIZE) {
|
|
LOG_DEBUG("oversized ft2232 scan (predicted_size > FT2232_BUFFER_SIZE)");
|
|
/* unsent commands before this */
|
|
if (first_unsent != cmd)
|
|
if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
|
|
/* current command */
|
|
ft2232_end_state(cmd->cmd.scan->end_state);
|
|
ft2232_large_scan(cmd->cmd.scan, type, buffer, scan_size);
|
|
require_send = 0;
|
|
first_unsent = cmd->next;
|
|
if (buffer)
|
|
free(buffer);
|
|
return retval;
|
|
} else if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) {
|
|
LOG_DEBUG(
|
|
"ft2232 buffer size reached, sending queued commands (first_unsent: %p, cmd: %p)",
|
|
first_unsent,
|
|
cmd);
|
|
if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
require_send = 0;
|
|
first_unsent = cmd;
|
|
}
|
|
ft2232_expect_read += ft2232_predict_scan_in(scan_size, type);
|
|
/* LOG_DEBUG("new read size: %i", ft2232_expect_read); */
|
|
ft2232_end_state(cmd->cmd.scan->end_state);
|
|
ft2232_add_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size);
|
|
require_send = 1;
|
|
if (buffer)
|
|
free(buffer);
|
|
DEBUG_JTAG_IO("%s scan, %i bits, end in %s",
|
|
(cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size,
|
|
tap_state_name(tap_get_end_state()));
|
|
return retval;
|
|
|
|
}
|
|
|
|
static int ft2232_execute_reset(struct jtag_command *cmd)
|
|
{
|
|
int retval;
|
|
int predicted_size = 0;
|
|
retval = ERROR_OK;
|
|
|
|
DEBUG_JTAG_IO("reset trst: %i srst %i",
|
|
cmd->cmd.reset->trst, cmd->cmd.reset->srst);
|
|
|
|
/* only send the maximum buffer size that FT2232C can handle */
|
|
predicted_size = 3;
|
|
if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) {
|
|
if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
require_send = 0;
|
|
first_unsent = cmd;
|
|
}
|
|
|
|
if ((cmd->cmd.reset->trst == 1) ||
|
|
(cmd->cmd.reset->srst && (jtag_get_reset_config() & RESET_SRST_PULLS_TRST)))
|
|
tap_set_state(TAP_RESET);
|
|
|
|
layout->reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst);
|
|
require_send = 1;
|
|
|
|
DEBUG_JTAG_IO("trst: %i, srst: %i",
|
|
cmd->cmd.reset->trst, cmd->cmd.reset->srst);
|
|
return retval;
|
|
}
|
|
|
|
static int ft2232_execute_sleep(struct jtag_command *cmd)
|
|
{
|
|
int retval;
|
|
retval = ERROR_OK;
|
|
|
|
DEBUG_JTAG_IO("sleep %" PRIi32, cmd->cmd.sleep->us);
|
|
|
|
if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
first_unsent = cmd->next;
|
|
jtag_sleep(cmd->cmd.sleep->us);
|
|
DEBUG_JTAG_IO("sleep %" PRIi32 " usec while in %s",
|
|
cmd->cmd.sleep->us,
|
|
tap_state_name(tap_get_state()));
|
|
return retval;
|
|
}
|
|
|
|
static int ft2232_execute_stableclocks(struct jtag_command *cmd)
|
|
{
|
|
int retval;
|
|
retval = ERROR_OK;
|
|
|
|
/* this is only allowed while in a stable state. A check for a stable
|
|
* state was done in jtag_add_clocks()
|
|
*/
|
|
if (ft2232_stableclocks(cmd->cmd.stableclocks->num_cycles, cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
DEBUG_JTAG_IO("clocks %i while in %s",
|
|
cmd->cmd.stableclocks->num_cycles,
|
|
tap_state_name(tap_get_state()));
|
|
return retval;
|
|
}
|
|
|
|
static int ft2232_execute_command(struct jtag_command *cmd)
|
|
{
|
|
int retval;
|
|
|
|
switch (cmd->type) {
|
|
case JTAG_RESET:
|
|
retval = ft2232_execute_reset(cmd);
|
|
break;
|
|
case JTAG_RUNTEST:
|
|
retval = ft2232_execute_runtest(cmd);
|
|
break;
|
|
case JTAG_TLR_RESET:
|
|
retval = ft2232_execute_statemove(cmd);
|
|
break;
|
|
case JTAG_PATHMOVE:
|
|
retval = ft2232_execute_pathmove(cmd);
|
|
break;
|
|
case JTAG_SCAN:
|
|
retval = ft2232_execute_scan(cmd);
|
|
break;
|
|
case JTAG_SLEEP:
|
|
retval = ft2232_execute_sleep(cmd);
|
|
break;
|
|
case JTAG_STABLECLOCKS:
|
|
retval = ft2232_execute_stableclocks(cmd);
|
|
break;
|
|
case JTAG_TMS:
|
|
retval = ft2232_execute_tms(cmd);
|
|
break;
|
|
default:
|
|
LOG_ERROR("BUG: unknown JTAG command type encountered");
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
break;
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
static int ft2232_execute_queue(void)
|
|
{
|
|
struct jtag_command *cmd = jtag_command_queue; /* currently processed command */
|
|
int retval;
|
|
|
|
first_unsent = cmd; /* next command that has to be sent */
|
|
require_send = 0;
|
|
|
|
/* return ERROR_OK, unless ft2232_send_and_recv reports a failed check
|
|
* that wasn't handled by a caller-provided error handler
|
|
*/
|
|
retval = ERROR_OK;
|
|
|
|
ft2232_buffer_size = 0;
|
|
ft2232_expect_read = 0;
|
|
|
|
/* blink, if the current layout has that feature */
|
|
if (layout->blink)
|
|
layout->blink();
|
|
|
|
while (cmd) {
|
|
/* fill the write buffer with the desired command */
|
|
if (ft2232_execute_command(cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
/* Start reading input before FT2232 TX buffer fills up.
|
|
* Sometimes this happens because we don't know the
|
|
* length of the last command before we execute it. So
|
|
* we simple inform the user.
|
|
*/
|
|
cmd = cmd->next;
|
|
|
|
if (ft2232_expect_read >= FT2232_BUFFER_READ_QUEUE_SIZE) {
|
|
if (ft2232_expect_read > (FT2232_BUFFER_READ_QUEUE_SIZE+1))
|
|
LOG_DEBUG("read buffer size looks too high %d/%d",
|
|
ft2232_expect_read,
|
|
(FT2232_BUFFER_READ_QUEUE_SIZE+1));
|
|
if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
first_unsent = cmd;
|
|
}
|
|
}
|
|
|
|
if (require_send > 0)
|
|
if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
|
|
return retval;
|
|
}
|
|
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
static int ft2232_init_ftd2xx(uint16_t vid, uint16_t pid, int more, int *try_more)
|
|
{
|
|
FT_STATUS status;
|
|
DWORD deviceID;
|
|
char SerialNumber[16];
|
|
char Description[64];
|
|
DWORD openex_flags = 0;
|
|
char *openex_string = NULL;
|
|
uint8_t latency_timer;
|
|
|
|
if (layout == NULL) {
|
|
LOG_WARNING("No ft2232 layout specified'");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
LOG_DEBUG("'ft2232' interface using FTD2XX with '%s' layout (%4.4x:%4.4x)",
|
|
layout->name, vid, pid);
|
|
|
|
#if IS_WIN32 == 0
|
|
/* Add non-standard Vid/Pid to the linux driver */
|
|
status = FT_SetVIDPID(vid, pid);
|
|
if (status != FT_OK)
|
|
LOG_WARNING("couldn't add %4.4x:%4.4x", vid, pid);
|
|
|
|
#endif
|
|
|
|
if (ft2232_device_desc && ft2232_serial) {
|
|
LOG_WARNING(
|
|
"can't open by device description and serial number, giving precedence to serial");
|
|
ft2232_device_desc = NULL;
|
|
}
|
|
|
|
if (ft2232_device_desc) {
|
|
openex_string = ft2232_device_desc;
|
|
openex_flags = FT_OPEN_BY_DESCRIPTION;
|
|
} else if (ft2232_serial) {
|
|
openex_string = ft2232_serial;
|
|
openex_flags = FT_OPEN_BY_SERIAL_NUMBER;
|
|
} else {
|
|
LOG_ERROR("neither device description nor serial number specified");
|
|
LOG_ERROR(
|
|
"please add \"ft2232_device_desc <string>\" or \"ft2232_serial <string>\" to your .cfg file");
|
|
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
status = FT_OpenEx(openex_string, openex_flags, &ftdih);
|
|
if (status != FT_OK) {
|
|
/* under Win32, the FTD2XX driver appends an "A" to the end
|
|
* of the description, if we tried by the desc, then
|
|
* try by the alternate "A" description. */
|
|
if (openex_string == ft2232_device_desc) {
|
|
/* Try the alternate method. */
|
|
openex_string = ft2232_device_desc_A;
|
|
status = FT_OpenEx(openex_string, openex_flags, &ftdih);
|
|
if (status == FT_OK) {
|
|
/* yea, the "alternate" method worked! */
|
|
} else {
|
|
/* drat, give the user a meaningfull message.
|
|
* telling the use we tried *BOTH* methods. */
|
|
LOG_WARNING("Unable to open FTDI Device tried: '%s' and '%s'",
|
|
ft2232_device_desc,
|
|
ft2232_device_desc_A);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (status != FT_OK) {
|
|
DWORD num_devices;
|
|
|
|
if (more) {
|
|
LOG_WARNING("unable to open ftdi device (trying more): %s",
|
|
ftd2xx_status_string(status));
|
|
*try_more = 1;
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
LOG_ERROR("unable to open ftdi device: %s",
|
|
ftd2xx_status_string(status));
|
|
status = FT_ListDevices(&num_devices, NULL, FT_LIST_NUMBER_ONLY);
|
|
if (status == FT_OK) {
|
|
char **desc_array = malloc(sizeof(char *) * (num_devices + 1));
|
|
uint32_t i;
|
|
|
|
for (i = 0; i < num_devices; i++)
|
|
desc_array[i] = malloc(64);
|
|
|
|
desc_array[num_devices] = NULL;
|
|
|
|
status = FT_ListDevices(desc_array, &num_devices, FT_LIST_ALL | openex_flags);
|
|
|
|
if (status == FT_OK) {
|
|
LOG_ERROR("ListDevices: %" PRIu32, (uint32_t)num_devices);
|
|
for (i = 0; i < num_devices; i++)
|
|
LOG_ERROR("%" PRIu32 ": \"%s\"", i, desc_array[i]);
|
|
}
|
|
|
|
for (i = 0; i < num_devices; i++)
|
|
free(desc_array[i]);
|
|
|
|
free(desc_array);
|
|
} else
|
|
LOG_ERROR("ListDevices: NONE");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
status = FT_SetLatencyTimer(ftdih, ft2232_latency);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("unable to set latency timer: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
status = FT_GetLatencyTimer(ftdih, &latency_timer);
|
|
if (status != FT_OK) {
|
|
/* ftd2xx 1.04 (linux) has a bug when calling FT_GetLatencyTimer
|
|
* so ignore errors if using this driver version */
|
|
DWORD dw_version;
|
|
|
|
status = FT_GetDriverVersion(ftdih, &dw_version);
|
|
LOG_ERROR("unable to get latency timer: %s",
|
|
ftd2xx_status_string(status));
|
|
|
|
if ((status == FT_OK) && (dw_version == 0x10004)) {
|
|
LOG_ERROR("ftd2xx 1.04 detected - this has known issues " \
|
|
"with FT_GetLatencyTimer, upgrade to a newer version");
|
|
} else
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
} else
|
|
LOG_DEBUG("current latency timer: %i", latency_timer);
|
|
|
|
status = FT_SetTimeouts(ftdih, 5000, 5000);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("unable to set timeouts: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
status = FT_SetBitMode(ftdih, 0x0b, 2);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("unable to enable bit i/o mode: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
status = FT_GetDeviceInfo(ftdih, &ftdi_device, &deviceID,
|
|
SerialNumber, Description, NULL);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("unable to get FT_GetDeviceInfo: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
} else {
|
|
static const char *type_str[] = {
|
|
"BM", "AM", "100AX", "UNKNOWN", "2232C", "232R", "2232H", "4232H", "232H"
|
|
};
|
|
unsigned no_of_known_types = ARRAY_SIZE(type_str) - 1;
|
|
unsigned type_index = ((unsigned)ftdi_device <= no_of_known_types)
|
|
? ftdi_device : FT_DEVICE_UNKNOWN;
|
|
LOG_INFO("device: %" PRIu32 " \"%s\"", (uint32_t)ftdi_device, type_str[type_index]);
|
|
LOG_INFO("deviceID: %" PRIu32, (uint32_t)deviceID);
|
|
LOG_INFO("SerialNumber: %s", SerialNumber);
|
|
LOG_INFO("Description: %s", Description);
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int ft2232_purge_ftd2xx(void)
|
|
{
|
|
FT_STATUS status;
|
|
|
|
status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("error purging ftd2xx device: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
#endif /* BUILD_FT2232_FTD2XX == 1 */
|
|
|
|
#if BUILD_FT2232_LIBFTDI == 1
|
|
static int ft2232_init_libftdi(uint16_t vid, uint16_t pid, int more, int *try_more, int channel)
|
|
{
|
|
uint8_t latency_timer;
|
|
|
|
if (layout == NULL) {
|
|
LOG_WARNING("No ft2232 layout specified'");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
LOG_DEBUG("'ft2232' interface using libftdi with '%s' layout (%4.4x:%4.4x)",
|
|
layout->name, vid, pid);
|
|
|
|
if (ftdi_init(&ftdic) < 0)
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
|
|
/* default to INTERFACE_A */
|
|
if (channel == INTERFACE_ANY)
|
|
channel = INTERFACE_A;
|
|
if (ftdi_set_interface(&ftdic, channel) < 0) {
|
|
LOG_ERROR("unable to select FT2232 channel A: %s", ftdic.error_str);
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
/* context, vendor id, product id */
|
|
if (ftdi_usb_open_desc(&ftdic, vid, pid, ft2232_device_desc, ft2232_serial) < 0) {
|
|
if (more)
|
|
LOG_WARNING("unable to open ftdi device (trying more): %s",
|
|
ftdic.error_str);
|
|
else
|
|
LOG_ERROR("unable to open ftdi device: %s", ftdic.error_str);
|
|
*try_more = 1;
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
/* There is already a reset in ftdi_usb_open_desc, this should be redundant */
|
|
if (ftdi_usb_reset(&ftdic) < 0) {
|
|
LOG_ERROR("unable to reset ftdi device");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
if (ftdi_set_latency_timer(&ftdic, ft2232_latency) < 0) {
|
|
LOG_ERROR("unable to set latency timer");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
if (ftdi_get_latency_timer(&ftdic, &latency_timer) < 0) {
|
|
LOG_ERROR("unable to get latency timer");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
} else
|
|
LOG_DEBUG("current latency timer: %i", latency_timer);
|
|
|
|
ftdi_set_bitmode(&ftdic, 0x0b, 2); /* ctx, JTAG I/O mask */
|
|
|
|
ftdi_device = ftdic.type;
|
|
static const char *type_str[] = {
|
|
"AM", "BM", "2232C", "R", "2232H", "4232H", "232H", "Unknown"
|
|
};
|
|
unsigned no_of_known_types = ARRAY_SIZE(type_str) - 1;
|
|
unsigned type_index = ((unsigned)ftdi_device < no_of_known_types)
|
|
? ftdi_device : no_of_known_types;
|
|
LOG_DEBUG("FTDI chip type: %i \"%s\"", (int)ftdi_device, type_str[type_index]);
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int ft2232_purge_libftdi(void)
|
|
{
|
|
if (ftdi_usb_purge_buffers(&ftdic) < 0) {
|
|
LOG_ERROR("ftdi_purge_buffers: %s", ftdic.error_str);
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
#endif /* BUILD_FT2232_LIBFTDI == 1 */
|
|
|
|
static int ft2232_set_data_bits_low_byte(uint8_t value, uint8_t direction)
|
|
{
|
|
uint8_t buf[3];
|
|
uint32_t bytes_written;
|
|
|
|
buf[0] = 0x80; /* command "set data bits low byte" */
|
|
buf[1] = value; /* value */
|
|
buf[2] = direction; /* direction */
|
|
|
|
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
|
|
|
|
if (ft2232_write(buf, sizeof(buf), &bytes_written) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize data bits low byte");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int ft2232_set_data_bits_high_byte(uint8_t value, uint8_t direction)
|
|
{
|
|
uint8_t buf[3];
|
|
uint32_t bytes_written;
|
|
|
|
buf[0] = 0x82; /* command "set data bits high byte" */
|
|
buf[1] = value; /* value */
|
|
buf[2] = direction; /* direction */
|
|
|
|
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
|
|
|
|
if (ft2232_write(buf, sizeof(buf), &bytes_written) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize data bits high byte");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int ft2232_init(void)
|
|
{
|
|
uint8_t buf[1];
|
|
int retval;
|
|
uint32_t bytes_written;
|
|
|
|
if (tap_get_tms_path_len(TAP_IRPAUSE, TAP_IRPAUSE) == 7)
|
|
LOG_DEBUG("ft2232 interface using 7 step jtag state transitions");
|
|
else
|
|
LOG_DEBUG("ft2232 interface using shortest path jtag state transitions");
|
|
if (layout == NULL) {
|
|
LOG_WARNING("No ft2232 layout specified'");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
for (int i = 0; 1; i++) {
|
|
/*
|
|
* "more indicates that there are more IDs to try, so we should
|
|
* not print an error for an ID mismatch (but for anything
|
|
* else, we should).
|
|
*
|
|
* try_more indicates that the error code returned indicates an
|
|
* ID mismatch (and nothing else) and that we should proceeed
|
|
* with the next ID pair.
|
|
*/
|
|
int more = ft2232_vid[i + 1] || ft2232_pid[i + 1];
|
|
int try_more = 0;
|
|
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
retval = ft2232_init_ftd2xx(ft2232_vid[i], ft2232_pid[i],
|
|
more, &try_more);
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
retval = ft2232_init_libftdi(ft2232_vid[i], ft2232_pid[i],
|
|
more, &try_more, ft2232_channel);
|
|
#endif
|
|
if (retval >= 0)
|
|
break;
|
|
if (!more || !try_more)
|
|
return retval;
|
|
}
|
|
|
|
ft2232_buffer_size = 0;
|
|
ft2232_buffer = malloc(FT2232_BUFFER_SIZE);
|
|
|
|
if (layout->init() != ERROR_OK)
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
|
|
if (ft2232_device_is_highspeed()) {
|
|
#ifndef BUILD_FT2232_HIGHSPEED
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
LOG_WARNING(
|
|
"High Speed device found - You need a newer FTD2XX driver (version 2.04.16 or later)");
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
LOG_WARNING(
|
|
"High Speed device found - You need a newer libftdi version (0.16 or later)");
|
|
#endif
|
|
#endif
|
|
/* make sure the legacy mode is disabled */
|
|
if (ftx232h_clk_divide_by_5(false) != ERROR_OK)
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
buf[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */
|
|
retval = ft2232_write(buf, 1, &bytes_written);
|
|
if (retval != ERROR_OK) {
|
|
LOG_ERROR("couldn't write to FT2232 to disable loopback");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
return ft2232_purge_ftd2xx();
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
return ft2232_purge_libftdi();
|
|
#endif
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
/** Updates defaults for DBUS signals: the four JTAG signals
|
|
* (TCK, TDI, TDO, TMS) and * the four GPIOL signals.
|
|
*/
|
|
static inline void ftx232_dbus_init(void)
|
|
{
|
|
low_output = 0x08;
|
|
low_direction = 0x0b;
|
|
}
|
|
|
|
/** Initializes DBUS signals: the four JTAG signals (TCK, TDI, TDO, TMS),
|
|
* the four GPIOL signals. Initialization covers value and direction,
|
|
* as customized for each layout.
|
|
*/
|
|
static int ftx232_dbus_write(void)
|
|
{
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
|
|
low_direction &= ~nTRSTnOE; /* nTRST input */
|
|
low_output &= ~nTRST; /* nTRST = 0 */
|
|
} else {
|
|
low_direction |= nTRSTnOE; /* nTRST output */
|
|
low_output |= nTRST; /* nTRST = 1 */
|
|
}
|
|
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL) {
|
|
low_direction |= nSRSTnOE; /* nSRST output */
|
|
low_output |= nSRST; /* nSRST = 1 */
|
|
} else {
|
|
low_direction &= ~nSRSTnOE; /* nSRST input */
|
|
low_output &= ~nSRST; /* nSRST = 0 */
|
|
}
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 DBUS");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int usbjtag_init(void)
|
|
{
|
|
/*
|
|
* NOTE: This is now _specific_ to the "usbjtag" layout.
|
|
* Don't try cram any more layouts into this.
|
|
*/
|
|
ftx232_dbus_init();
|
|
|
|
nTRST = 0x10;
|
|
nTRSTnOE = 0x10;
|
|
nSRST = 0x40;
|
|
nSRSTnOE = 0x40;
|
|
|
|
return ftx232_dbus_write();
|
|
}
|
|
|
|
static int lm3s811_jtag_init(void)
|
|
{
|
|
ftx232_dbus_init();
|
|
|
|
/* There are multiple revisions of LM3S811 eval boards:
|
|
* - Rev B (and older?) boards have no SWO trace support.
|
|
* - Rev C boards add ADBUS_6 DBG_ENn and BDBUS_4 SWO_EN;
|
|
* they should use the "luminary_icdi" layout instead.
|
|
*/
|
|
nTRST = 0x0;
|
|
nTRSTnOE = 0x00;
|
|
nSRST = 0x20;
|
|
nSRSTnOE = 0x20;
|
|
low_output = 0x88;
|
|
low_direction = 0x8b;
|
|
|
|
return ftx232_dbus_write();
|
|
}
|
|
|
|
static int icdi_jtag_init(void)
|
|
{
|
|
ftx232_dbus_init();
|
|
|
|
/* Most Luminary eval boards support SWO trace output,
|
|
* and should use this "luminary_icdi" layout.
|
|
*
|
|
* ADBUS 0..3 are used for JTAG as usual. GPIOs are used
|
|
* to switch between JTAG and SWD, or switch the ft2232 UART
|
|
* on the second MPSSE channel/interface (BDBUS)
|
|
* between (i) the stellaris UART (on Luminary boards)
|
|
* or (ii) SWO trace data (generic).
|
|
*
|
|
* We come up in JTAG mode and may switch to SWD later (with
|
|
* SWO/trace option if SWD is active).
|
|
*
|
|
* DBUS == GPIO-Lx
|
|
* CBUS == GPIO-Hx
|
|
*/
|
|
|
|
|
|
#define ICDI_JTAG_EN (1 << 7) /* ADBUS 7 (a.k.a. DBGMOD) */
|
|
#define ICDI_DBG_ENn (1 << 6) /* ADBUS 6 */
|
|
#define ICDI_SRST (1 << 5) /* ADBUS 5 */
|
|
|
|
|
|
/* GPIOs on second channel/interface (UART) ... */
|
|
#define ICDI_SWO_EN (1 << 4) /* BDBUS 4 */
|
|
#define ICDI_TX_SWO (1 << 1) /* BDBUS 1 */
|
|
#define ICDI_VCP_RX (1 << 0) /* BDBUS 0 (to stellaris UART) */
|
|
|
|
nTRST = 0x0;
|
|
nTRSTnOE = 0x00;
|
|
nSRST = ICDI_SRST;
|
|
nSRSTnOE = ICDI_SRST;
|
|
|
|
low_direction |= ICDI_JTAG_EN | ICDI_DBG_ENn;
|
|
low_output |= ICDI_JTAG_EN;
|
|
low_output &= ~ICDI_DBG_ENn;
|
|
|
|
return ftx232_dbus_write();
|
|
}
|
|
|
|
static int signalyzer_init(void)
|
|
{
|
|
ftx232_dbus_init();
|
|
|
|
nTRST = 0x10;
|
|
nTRSTnOE = 0x10;
|
|
nSRST = 0x20;
|
|
nSRSTnOE = 0x20;
|
|
return ftx232_dbus_write();
|
|
}
|
|
|
|
static int axm0432_jtag_init(void)
|
|
{
|
|
low_output = 0x08;
|
|
low_direction = 0x2b;
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
if (strcmp(layout->name, "axm0432_jtag") == 0) {
|
|
nTRST = 0x08;
|
|
nTRSTnOE = 0x0; /* No output enable for TRST*/
|
|
nSRST = 0x04;
|
|
nSRSTnOE = 0x0; /* No output enable for SRST*/
|
|
} else {
|
|
LOG_ERROR("BUG: axm0432_jtag_init called for non axm0432 layout");
|
|
exit(-1);
|
|
}
|
|
|
|
high_output = 0x0;
|
|
high_direction = 0x0c;
|
|
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
LOG_ERROR("can't set nTRSTOE to push-pull on the Dicarlo jtag");
|
|
else
|
|
high_output |= nTRST;
|
|
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
LOG_ERROR("can't set nSRST to push-pull on the Dicarlo jtag");
|
|
else
|
|
high_output |= nSRST;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'Dicarlo' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int redbee_init(void)
|
|
{
|
|
low_output = 0x08;
|
|
low_direction = 0x2b;
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'redbee' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
nTRST = 0x08;
|
|
nTRSTnOE = 0x0; /* No output enable for TRST*/
|
|
nSRST = 0x04;
|
|
nSRSTnOE = 0x0; /* No output enable for SRST*/
|
|
|
|
high_output = 0x0;
|
|
high_direction = 0x0c;
|
|
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
LOG_ERROR("can't set nTRSTOE to push-pull on redbee");
|
|
else
|
|
high_output |= nTRST;
|
|
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
LOG_ERROR("can't set nSRST to push-pull on redbee");
|
|
else
|
|
high_output |= nSRST;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'redbee' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int jtagkey_init(void)
|
|
{
|
|
low_output = 0x08;
|
|
low_direction = 0x1b;
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
if (strcmp(layout->name, "jtagkey") == 0) {
|
|
nTRST = 0x01;
|
|
nTRSTnOE = 0x4;
|
|
nSRST = 0x02;
|
|
nSRSTnOE = 0x08;
|
|
} else if ((strcmp(layout->name, "jtagkey_prototype_v1") == 0)
|
|
|| (strcmp(layout->name, "oocdlink") == 0)) {
|
|
nTRST = 0x02;
|
|
nTRSTnOE = 0x1;
|
|
nSRST = 0x08;
|
|
nSRSTnOE = 0x04;
|
|
} else {
|
|
LOG_ERROR("BUG: jtagkey_init called for non jtagkey layout");
|
|
exit(-1);
|
|
}
|
|
|
|
high_output = 0x0;
|
|
high_direction = 0x0f;
|
|
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
|
|
high_output |= nTRSTnOE;
|
|
high_output &= ~nTRST;
|
|
} else {
|
|
high_output &= ~nTRSTnOE;
|
|
high_output |= nTRST;
|
|
}
|
|
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL) {
|
|
high_output &= ~nSRSTnOE;
|
|
high_output |= nSRST;
|
|
} else {
|
|
high_output |= nSRSTnOE;
|
|
high_output &= ~nSRST;
|
|
}
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int olimex_jtag_init(void)
|
|
{
|
|
low_output = 0x08;
|
|
low_direction = 0x1b;
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
nTRST = 0x01;
|
|
nTRSTnOE = 0x4;
|
|
nSRST = 0x02;
|
|
nSRSTnOE = 0x00;/* no output enable for nSRST */
|
|
|
|
high_output = 0x0;
|
|
high_direction = 0x0f;
|
|
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
|
|
high_output |= nTRSTnOE;
|
|
high_output &= ~nTRST;
|
|
} else {
|
|
high_output &= ~nTRSTnOE;
|
|
high_output |= nTRST;
|
|
}
|
|
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
LOG_ERROR("can't set nSRST to push-pull on the Olimex ARM-USB-OCD");
|
|
else
|
|
high_output &= ~nSRST;
|
|
|
|
/* turn red LED on */
|
|
high_output |= 0x08;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int flyswatter_init(int rev)
|
|
{
|
|
low_output = 0x18;
|
|
low_direction = 0x7b;
|
|
|
|
if ((rev < 0) || (rev > 3)) {
|
|
LOG_ERROR("bogus 'flyswatter' revision supplied (%i)", rev);
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
if (rev == 1)
|
|
low_direction |= 1 << 7;
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
nTRST = 0x10;
|
|
nTRSTnOE = 0x0; /* not output enable for nTRST */
|
|
nSRST = 0x20;
|
|
nSRSTnOE = 0x00; /* no output enable for nSRST */
|
|
|
|
high_output = 0x00;
|
|
|
|
if (rev == 1)
|
|
high_direction = 0x0c;
|
|
else
|
|
high_direction = 0x01;
|
|
|
|
/* turn red LED3 on, LED2 off */
|
|
high_output |= 0x08;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int flyswatter1_init(void)
|
|
{
|
|
return flyswatter_init(1);
|
|
}
|
|
|
|
static int flyswatter2_init(void)
|
|
{
|
|
return flyswatter_init(2);
|
|
}
|
|
|
|
static int minimodule_init(void)
|
|
{
|
|
low_output = 0x18; /* check if srst should be 1 or 0 initially. (0x08) (flyswatter was
|
|
* 0x18) */
|
|
low_direction = 0xfb; /* 0xfb; */
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'minimodule' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
|
|
nSRST = 0x20;
|
|
|
|
high_output = 0x00;
|
|
high_direction = 0x05;
|
|
|
|
/* turn red LED3 on, LED2 off */
|
|
/* high_output |= 0x08; */
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'minimodule' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int turtle_init(void)
|
|
{
|
|
low_output = 0x08;
|
|
low_direction = 0x5b;
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
nSRST = 0x40;
|
|
|
|
high_output = 0x00;
|
|
high_direction = 0x0C;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int comstick_init(void)
|
|
{
|
|
low_output = 0x08;
|
|
low_direction = 0x0b;
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
nTRST = 0x01;
|
|
nTRSTnOE = 0x00; /* no output enable for nTRST */
|
|
nSRST = 0x02;
|
|
nSRSTnOE = 0x00; /* no output enable for nSRST */
|
|
|
|
high_output = 0x03;
|
|
high_direction = 0x03;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int stm32stick_init(void)
|
|
{
|
|
low_output = 0x88;
|
|
low_direction = 0x8b;
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
nTRST = 0x01;
|
|
nTRSTnOE = 0x00; /* no output enable for nTRST */
|
|
nSRST = 0x80;
|
|
nSRSTnOE = 0x00; /* no output enable for nSRST */
|
|
|
|
high_output = 0x01;
|
|
high_direction = 0x03;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int sheevaplug_init(void)
|
|
{
|
|
low_output = 0x08;
|
|
low_direction = 0x1b;
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
nTRSTnOE = 0x1;
|
|
nTRST = 0x02;
|
|
nSRSTnOE = 0x4;
|
|
nSRST = 0x08;
|
|
|
|
high_output = 0x0;
|
|
high_direction = 0x0f;
|
|
|
|
/* nTRST is always push-pull */
|
|
high_output &= ~nTRSTnOE;
|
|
high_output |= nTRST;
|
|
|
|
/* nSRST is always open-drain */
|
|
high_output |= nSRSTnOE;
|
|
high_output &= ~nSRST;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int cortino_jtag_init(void)
|
|
{
|
|
low_output = 0x08;
|
|
low_direction = 0x1b;
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'cortino' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
nTRST = 0x01;
|
|
nTRSTnOE = 0x00; /* no output enable for nTRST */
|
|
nSRST = 0x02;
|
|
nSRSTnOE = 0x00; /* no output enable for nSRST */
|
|
|
|
high_output = 0x03;
|
|
high_direction = 0x03;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'cortino' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int lisa_l_init(void)
|
|
{
|
|
ftx232_dbus_init();
|
|
|
|
nTRST = 0x10;
|
|
nTRSTnOE = 0x10;
|
|
nSRST = 0x40;
|
|
nSRSTnOE = 0x40;
|
|
|
|
high_output = 0x00;
|
|
high_direction = 0x18;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'lisa_l' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ftx232_dbus_write();
|
|
}
|
|
|
|
static int flossjtag_init(void)
|
|
{
|
|
ftx232_dbus_init();
|
|
|
|
nTRST = 0x10;
|
|
nTRSTnOE = 0x10;
|
|
nSRST = 0x40;
|
|
nSRSTnOE = 0x40;
|
|
|
|
high_output = 0x00;
|
|
high_direction = 0x18;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'Floss-JTAG' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ftx232_dbus_write();
|
|
}
|
|
|
|
/*
|
|
* The reference schematic from TI for the XDS100v2 has a CPLD on which opens
|
|
* the door for a number of different configurations
|
|
*
|
|
* Known Implementations:
|
|
* http://processors.wiki.ti.com/images/9/93/TMS570LS20216_USB_STICK_Schematic.pdf
|
|
*
|
|
* http://processors.wiki.ti.com/index.php/XDS100 (rev2)
|
|
* * CLPD logic: Rising edge to enable outputs (XDS100_PWR_RST)
|
|
* * ACBUS3 to transition 0->1 (OE rising edge)
|
|
* * CPLD logic: Put the EMU0/1 pins in Hi-Z:
|
|
* * ADBUS5/GPIOL1 = EMU_EN = 1
|
|
* * ADBUS6/GPIOL2 = EMU0 = 0
|
|
* * ACBUS4/SPARE0 = EMU1 = 0
|
|
* * CPLD logic: Disable loopback
|
|
* * ACBUS6/SPARE2 = LOOPBACK = 0
|
|
*/
|
|
#define XDS100_nEMU_EN (1<<5)
|
|
#define XDS100_nEMU0 (1<<6)
|
|
|
|
#define XDS100_PWR_RST (1<<3)
|
|
#define XDS100_nEMU1 (1<<4)
|
|
#define XDS100_LOOPBACK (1<<6)
|
|
static int xds100v2_init(void)
|
|
{
|
|
/* These are in the lower byte */
|
|
nTRST = 0x10;
|
|
nTRSTnOE = 0x10;
|
|
|
|
/* These aren't actually used on 14 pin connectors
|
|
* These are in the upper byte */
|
|
nSRST = 0x01;
|
|
nSRSTnOE = 0x01;
|
|
|
|
low_output = 0x08 | nTRST | XDS100_nEMU_EN;
|
|
low_direction = 0x0b | nTRSTnOE | XDS100_nEMU_EN | XDS100_nEMU0;
|
|
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'xds100v2' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
high_output = 0;
|
|
high_direction = nSRSTnOE | XDS100_LOOPBACK | XDS100_PWR_RST | XDS100_nEMU1;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't put CPLD in to reset with 'xds100v2' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
high_output |= XDS100_PWR_RST;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't bring CPLD out of reset with 'xds100v2' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static void olimex_jtag_blink(void)
|
|
{
|
|
/* Olimex ARM-USB-OCD has a LED connected to ACBUS3
|
|
* ACBUS3 is bit 3 of the GPIOH port
|
|
*/
|
|
high_output ^= 0x08;
|
|
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
}
|
|
|
|
static void flyswatter_jtag_blink(unsigned char led)
|
|
{
|
|
buffer_write(0x82);
|
|
buffer_write(high_output ^ led);
|
|
buffer_write(high_direction);
|
|
}
|
|
|
|
static void flyswatter1_jtag_blink(void)
|
|
{
|
|
/*
|
|
* Flyswatter has two LEDs connected to ACBUS2 and ACBUS3
|
|
*/
|
|
flyswatter_jtag_blink(0xc);
|
|
}
|
|
|
|
static void flyswatter2_jtag_blink(void)
|
|
{
|
|
/*
|
|
* Flyswatter2 only has one LED connected to ACBUS2
|
|
*/
|
|
flyswatter_jtag_blink(0x4);
|
|
}
|
|
|
|
static void turtle_jtag_blink(void)
|
|
{
|
|
/*
|
|
* Turtelizer2 has two LEDs connected to ACBUS2 and ACBUS3
|
|
*/
|
|
if (high_output & 0x08)
|
|
high_output = 0x04;
|
|
else
|
|
high_output = 0x08;
|
|
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
}
|
|
|
|
static void lisa_l_blink(void)
|
|
{
|
|
/*
|
|
* Lisa/L has two LEDs connected to BCBUS3 and BCBUS4
|
|
*/
|
|
if (high_output & 0x10)
|
|
high_output = 0x08;
|
|
else
|
|
high_output = 0x10;
|
|
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
}
|
|
|
|
static void flossjtag_blink(void)
|
|
{
|
|
/*
|
|
* Floss-JTAG has two LEDs connected to ACBUS3 and ACBUS4
|
|
*/
|
|
if (high_output & 0x10)
|
|
high_output = 0x08;
|
|
else
|
|
high_output = 0x10;
|
|
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
}
|
|
|
|
static int ft2232_quit(void)
|
|
{
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
FT_STATUS status;
|
|
|
|
status = FT_Close(ftdih);
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
ftdi_usb_close(&ftdic);
|
|
|
|
ftdi_deinit(&ftdic);
|
|
#endif
|
|
|
|
free(ft2232_buffer);
|
|
ft2232_buffer = NULL;
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
COMMAND_HANDLER(ft2232_handle_device_desc_command)
|
|
{
|
|
char *cp;
|
|
char buf[200];
|
|
if (CMD_ARGC == 1) {
|
|
ft2232_device_desc = strdup(CMD_ARGV[0]);
|
|
cp = strchr(ft2232_device_desc, 0);
|
|
/* under Win32, the FTD2XX driver appends an "A" to the end
|
|
* of the description, this examines the given desc
|
|
* and creates the 'missing' _A or non_A variable. */
|
|
if ((cp[-1] == 'A') && (cp[-2] == ' ')) {
|
|
/* it was, so make this the "A" version. */
|
|
ft2232_device_desc_A = ft2232_device_desc;
|
|
/* and *CREATE* the non-A version. */
|
|
strcpy(buf, ft2232_device_desc);
|
|
cp = strchr(buf, 0);
|
|
cp[-2] = 0;
|
|
ft2232_device_desc = strdup(buf);
|
|
} else {
|
|
/* <space > A not defined
|
|
* so create it */
|
|
sprintf(buf, "%s A", ft2232_device_desc);
|
|
ft2232_device_desc_A = strdup(buf);
|
|
}
|
|
} else
|
|
LOG_ERROR("expected exactly one argument to ft2232_device_desc <description>");
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
COMMAND_HANDLER(ft2232_handle_serial_command)
|
|
{
|
|
if (CMD_ARGC == 1)
|
|
ft2232_serial = strdup(CMD_ARGV[0]);
|
|
else
|
|
return ERROR_COMMAND_SYNTAX_ERROR;
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
COMMAND_HANDLER(ft2232_handle_layout_command)
|
|
{
|
|
if (CMD_ARGC != 1)
|
|
return ERROR_COMMAND_SYNTAX_ERROR;
|
|
|
|
if (layout) {
|
|
LOG_ERROR("already specified ft2232_layout %s",
|
|
layout->name);
|
|
return (strcmp(layout->name, CMD_ARGV[0]) != 0)
|
|
? ERROR_FAIL
|
|
: ERROR_OK;
|
|
}
|
|
|
|
for (const struct ft2232_layout *l = ft2232_layouts; l->name; l++) {
|
|
if (strcmp(l->name, CMD_ARGV[0]) == 0) {
|
|
layout = l;
|
|
ft2232_channel = l->channel;
|
|
return ERROR_OK;
|
|
}
|
|
}
|
|
|
|
LOG_ERROR("No FT2232 layout '%s' found", CMD_ARGV[0]);
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
COMMAND_HANDLER(ft2232_handle_vid_pid_command)
|
|
{
|
|
if (CMD_ARGC > MAX_USB_IDS * 2) {
|
|
LOG_WARNING("ignoring extra IDs in ft2232_vid_pid "
|
|
"(maximum is %d pairs)", MAX_USB_IDS);
|
|
CMD_ARGC = MAX_USB_IDS * 2;
|
|
}
|
|
if (CMD_ARGC < 2 || (CMD_ARGC & 1)) {
|
|
LOG_WARNING("incomplete ft2232_vid_pid configuration directive");
|
|
if (CMD_ARGC < 2)
|
|
return ERROR_COMMAND_SYNTAX_ERROR;
|
|
/* remove the incomplete trailing id */
|
|
CMD_ARGC -= 1;
|
|
}
|
|
|
|
unsigned i;
|
|
for (i = 0; i < CMD_ARGC; i += 2) {
|
|
COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i], ft2232_vid[i >> 1]);
|
|
COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i + 1], ft2232_pid[i >> 1]);
|
|
}
|
|
|
|
/*
|
|
* Explicitly terminate, in case there are multiples instances of
|
|
* ft2232_vid_pid.
|
|
*/
|
|
ft2232_vid[i >> 1] = ft2232_pid[i >> 1] = 0;
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
COMMAND_HANDLER(ft2232_handle_latency_command)
|
|
{
|
|
if (CMD_ARGC == 1)
|
|
ft2232_latency = atoi(CMD_ARGV[0]);
|
|
else
|
|
return ERROR_COMMAND_SYNTAX_ERROR;
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
COMMAND_HANDLER(ft2232_handle_channel_command)
|
|
{
|
|
if (CMD_ARGC == 1) {
|
|
ft2232_channel = atoi(CMD_ARGV[0]);
|
|
if (ft2232_channel < 0 || ft2232_channel > 4)
|
|
LOG_ERROR("ft2232_channel must be in the 0 to 4 range");
|
|
} else
|
|
LOG_ERROR("expected exactly one argument to ft2232_channel <ch>");
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static int ft2232_stableclocks(int num_cycles, struct jtag_command *cmd)
|
|
{
|
|
int retval = 0;
|
|
|
|
/* 7 bits of either ones or zeros. */
|
|
uint8_t tms = (tap_get_state() == TAP_RESET ? 0x7F : 0x00);
|
|
|
|
while (num_cycles > 0) {
|
|
/* the command 0x4b, "Clock Data to TMS/CS Pin (no Read)" handles
|
|
* at most 7 bits per invocation. Here we invoke it potentially
|
|
* several times.
|
|
*/
|
|
int bitcount_per_command = (num_cycles > 7) ? 7 : num_cycles;
|
|
|
|
if (ft2232_buffer_size + 3 >= FT2232_BUFFER_SIZE) {
|
|
if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
|
|
retval = ERROR_JTAG_QUEUE_FAILED;
|
|
|
|
first_unsent = cmd;
|
|
}
|
|
|
|
/* there are no state transitions in this code, so omit state tracking */
|
|
|
|
/* command "Clock Data to TMS/CS Pin (no Read)" */
|
|
buffer_write(0x4b);
|
|
|
|
/* scan 7 bit */
|
|
buffer_write(bitcount_per_command - 1);
|
|
|
|
/* TMS data bits are either all zeros or ones to stay in the current stable state */
|
|
buffer_write(tms);
|
|
|
|
require_send = 1;
|
|
|
|
num_cycles -= bitcount_per_command;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Support for IceBear JTAG adapter from Section5:
|
|
* http://section5.ch/icebear
|
|
*
|
|
* Author: Sten, debian@sansys-electronic.com
|
|
*/
|
|
|
|
/* Icebear pin layout
|
|
*
|
|
* ADBUS5 (nEMU) nSRST | 2 1| GND (10k->VCC)
|
|
* GND GND | 4 3| n.c.
|
|
* ADBUS3 TMS | 6 5| ADBUS6 VCC
|
|
* ADBUS0 TCK | 8 7| ADBUS7 (GND)
|
|
* ADBUS4 nTRST |10 9| ACBUS0 (GND)
|
|
* ADBUS1 TDI |12 11| ACBUS1 (GND)
|
|
* ADBUS2 TDO |14 13| GND GND
|
|
*
|
|
* ADBUS0 O L TCK ACBUS0 GND
|
|
* ADBUS1 O L TDI ACBUS1 GND
|
|
* ADBUS2 I TDO ACBUS2 n.c.
|
|
* ADBUS3 O H TMS ACBUS3 n.c.
|
|
* ADBUS4 O H nTRST
|
|
* ADBUS5 O H nSRST
|
|
* ADBUS6 - VCC
|
|
* ADBUS7 - GND
|
|
*/
|
|
static int icebear_jtag_init(void)
|
|
{
|
|
low_direction = 0x0b; /* output: TCK TDI TMS; input: TDO */
|
|
low_output = 0x08; /* high: TMS; low: TCK TDI */
|
|
nTRST = 0x10;
|
|
nSRST = 0x20;
|
|
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
if ((jtag_reset_config & RESET_TRST_OPEN_DRAIN) != 0)
|
|
low_direction &= ~nTRST; /* nTRST high impedance */
|
|
else {
|
|
low_direction |= nTRST;
|
|
low_output |= nTRST;
|
|
}
|
|
|
|
low_direction |= nSRST;
|
|
low_output |= nSRST;
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (low)");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
high_output = 0x0;
|
|
high_direction = 0x00;
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (high)");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static void icebear_jtag_reset(int trst, int srst)
|
|
{
|
|
if (trst == 1) {
|
|
low_direction |= nTRST;
|
|
low_output &= ~nTRST;
|
|
} else if (trst == 0) {
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
if ((jtag_reset_config & RESET_TRST_OPEN_DRAIN) != 0)
|
|
low_direction &= ~nTRST;
|
|
else
|
|
low_output |= nTRST;
|
|
}
|
|
|
|
if (srst == 1)
|
|
low_output &= ~nSRST;
|
|
else if (srst == 0)
|
|
low_output |= nSRST;
|
|
|
|
/* command "set data bits low byte" */
|
|
buffer_write(0x80);
|
|
buffer_write(low_output);
|
|
buffer_write(low_direction);
|
|
|
|
LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x",
|
|
trst,
|
|
srst,
|
|
low_output,
|
|
low_direction);
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Support for Signalyzer H2 and Signalyzer H4
|
|
* JTAG adapter from Xverve Technologies Inc.
|
|
* http://www.signalyzer.com or http://www.xverve.com
|
|
*
|
|
* Author: Oleg Seiljus, oleg@signalyzer.com
|
|
*/
|
|
static unsigned char signalyzer_h_side;
|
|
static unsigned int signalyzer_h_adapter_type;
|
|
|
|
static int signalyzer_h_ctrl_write(int address, unsigned short value);
|
|
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
static int signalyzer_h_ctrl_read(int address, unsigned short *value);
|
|
#endif
|
|
|
|
#define SIGNALYZER_COMMAND_ADDR 128
|
|
#define SIGNALYZER_DATA_BUFFER_ADDR 129
|
|
|
|
#define SIGNALYZER_COMMAND_VERSION 0x41
|
|
#define SIGNALYZER_COMMAND_RESET 0x42
|
|
#define SIGNALYZER_COMMAND_POWERCONTROL_GET 0x50
|
|
#define SIGNALYZER_COMMAND_POWERCONTROL_SET 0x51
|
|
#define SIGNALYZER_COMMAND_PWM_SET 0x52
|
|
#define SIGNALYZER_COMMAND_LED_SET 0x53
|
|
#define SIGNALYZER_COMMAND_ADC 0x54
|
|
#define SIGNALYZER_COMMAND_GPIO_STATE 0x55
|
|
#define SIGNALYZER_COMMAND_GPIO_MODE 0x56
|
|
#define SIGNALYZER_COMMAND_GPIO_PORT 0x57
|
|
#define SIGNALYZER_COMMAND_I2C 0x58
|
|
|
|
#define SIGNALYZER_CHAN_A 1
|
|
#define SIGNALYZER_CHAN_B 2
|
|
/* LEDS use channel C */
|
|
#define SIGNALYZER_CHAN_C 4
|
|
|
|
#define SIGNALYZER_LED_GREEN 1
|
|
#define SIGNALYZER_LED_RED 2
|
|
|
|
#define SIGNALYZER_MODULE_TYPE_EM_LT16_A 0x0301
|
|
#define SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG 0x0302
|
|
#define SIGNALYZER_MODULE_TYPE_EM_JTAG 0x0303
|
|
#define SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P 0x0304
|
|
#define SIGNALYZER_MODULE_TYPE_EM_JTAG_P 0x0305
|
|
|
|
|
|
static int signalyzer_h_ctrl_write(int address, unsigned short value)
|
|
{
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
return FT_WriteEE(ftdih, address, value);
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
static int signalyzer_h_ctrl_read(int address, unsigned short *value)
|
|
{
|
|
return FT_ReadEE(ftdih, address, value);
|
|
}
|
|
#endif
|
|
|
|
static int signalyzer_h_led_set(unsigned char channel, unsigned char led,
|
|
int on_time_ms, int off_time_ms, unsigned char cycles)
|
|
{
|
|
unsigned char on_time;
|
|
unsigned char off_time;
|
|
|
|
if (on_time_ms < 0xFFFF)
|
|
on_time = (unsigned char)(on_time_ms / 62);
|
|
else
|
|
on_time = 0xFF;
|
|
|
|
off_time = (unsigned char)(off_time_ms / 62);
|
|
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
FT_STATUS status;
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
|
|
((uint32_t)(channel << 8) | led));
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write((SIGNALYZER_DATA_BUFFER_ADDR + 1),
|
|
((uint32_t)(on_time << 8) | off_time));
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write((SIGNALYZER_DATA_BUFFER_ADDR + 2),
|
|
((uint32_t)cycles));
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
|
|
SIGNALYZER_COMMAND_LED_SET);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
int retval;
|
|
|
|
retval = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
|
|
((uint32_t)(channel << 8) | led));
|
|
if (retval < 0) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftdi_get_error_string(&ftdic));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
retval = signalyzer_h_ctrl_write((SIGNALYZER_DATA_BUFFER_ADDR + 1),
|
|
((uint32_t)(on_time << 8) | off_time));
|
|
if (retval < 0) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftdi_get_error_string(&ftdic));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
retval = signalyzer_h_ctrl_write((SIGNALYZER_DATA_BUFFER_ADDR + 2),
|
|
(uint32_t)cycles);
|
|
if (retval < 0) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftdi_get_error_string(&ftdic));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
retval = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
|
|
SIGNALYZER_COMMAND_LED_SET);
|
|
if (retval < 0) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftdi_get_error_string(&ftdic));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
#endif
|
|
}
|
|
|
|
static int signalyzer_h_init(void)
|
|
{
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
FT_STATUS status;
|
|
int i;
|
|
#endif
|
|
|
|
char *end_of_desc;
|
|
|
|
uint16_t read_buf[12] = { 0 };
|
|
|
|
/* turn on center green led */
|
|
signalyzer_h_led_set(SIGNALYZER_CHAN_C, SIGNALYZER_LED_GREEN,
|
|
0xFFFF, 0x00, 0x00);
|
|
|
|
/* determine what channel config wants to open
|
|
* TODO: change me... current implementation is made to work
|
|
* with openocd description parsing.
|
|
*/
|
|
end_of_desc = strrchr(ft2232_device_desc, 0x00);
|
|
|
|
if (end_of_desc) {
|
|
signalyzer_h_side = *(end_of_desc - 1);
|
|
if (signalyzer_h_side == 'B')
|
|
signalyzer_h_side = SIGNALYZER_CHAN_B;
|
|
else
|
|
signalyzer_h_side = SIGNALYZER_CHAN_A;
|
|
} else {
|
|
LOG_ERROR("No Channel was specified");
|
|
return ERROR_FAIL;
|
|
}
|
|
|
|
signalyzer_h_led_set(signalyzer_h_side, SIGNALYZER_LED_GREEN,
|
|
1000, 1000, 0xFF);
|
|
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
/* read signalyzer versionining information */
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
|
|
SIGNALYZER_COMMAND_VERSION);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
status = signalyzer_h_ctrl_read((SIGNALYZER_DATA_BUFFER_ADDR + i),
|
|
&read_buf[i]);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_read returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
}
|
|
|
|
LOG_INFO("Signalyzer: ID info: { %.4x %.4x %.4x %.4x %.4x %.4x %.4x }",
|
|
read_buf[0], read_buf[1], read_buf[2], read_buf[3],
|
|
read_buf[4], read_buf[5], read_buf[6]);
|
|
|
|
/* set gpio register */
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
|
|
(uint32_t)(signalyzer_h_side << 8));
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR + 1, 0x0404);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
|
|
SIGNALYZER_COMMAND_GPIO_STATE);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
/* read adapter type information */
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
|
|
((uint32_t)(signalyzer_h_side << 8) | 0x01));
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(
|
|
(SIGNALYZER_DATA_BUFFER_ADDR + 1), 0xA000);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(
|
|
(SIGNALYZER_DATA_BUFFER_ADDR + 2), 0x0008);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
|
|
SIGNALYZER_COMMAND_I2C);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
usleep(100000);
|
|
|
|
status = signalyzer_h_ctrl_read(SIGNALYZER_COMMAND_ADDR, &read_buf[0]);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_read returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
if (read_buf[0] != 0x0498)
|
|
signalyzer_h_adapter_type = 0x0000;
|
|
else {
|
|
for (i = 0; i < 4; i++) {
|
|
status = signalyzer_h_ctrl_read((SIGNALYZER_DATA_BUFFER_ADDR + i), &read_buf[i]);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_read returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
}
|
|
|
|
signalyzer_h_adapter_type = read_buf[0];
|
|
}
|
|
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
/* currently libftdi does not allow reading individual eeprom
|
|
* locations, therefore adapter type cannot be detected.
|
|
* override with most common type
|
|
*/
|
|
signalyzer_h_adapter_type = SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG;
|
|
#endif
|
|
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
|
|
/* ADAPTOR: EM_LT16_A */
|
|
if (signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_LT16_A) {
|
|
LOG_INFO("Signalyzer: EM-LT (16-channel level translator) "
|
|
"detected. (HW: %2x).", (read_buf[1] >> 8));
|
|
|
|
nTRST = 0x10;
|
|
nTRSTnOE = 0x10;
|
|
nSRST = 0x20;
|
|
nSRSTnOE = 0x20;
|
|
|
|
low_output = 0x08;
|
|
low_direction = 0x1b;
|
|
|
|
high_output = 0x0;
|
|
high_direction = 0x0;
|
|
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
|
|
low_direction &= ~nTRSTnOE; /* nTRST input */
|
|
low_output &= ~nTRST; /* nTRST = 0 */
|
|
} else {
|
|
low_direction |= nTRSTnOE; /* nTRST output */
|
|
low_output |= nTRST; /* nTRST = 1 */
|
|
}
|
|
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL) {
|
|
low_direction |= nSRSTnOE; /* nSRST output */
|
|
low_output |= nSRST; /* nSRST = 1 */
|
|
} else {
|
|
low_direction &= ~nSRSTnOE; /* nSRST input */
|
|
low_output &= ~nSRST; /* nSRST = 0 */
|
|
}
|
|
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
/* enable power to the module */
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
|
|
((uint32_t)(signalyzer_h_side << 8) | 0x01));
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
|
|
SIGNALYZER_COMMAND_POWERCONTROL_SET);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
/* set gpio mode register */
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
|
|
(uint32_t)(signalyzer_h_side << 8));
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR + 1, 0x0000);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR, SIGNALYZER_COMMAND_GPIO_MODE);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
/* set gpio register */
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
|
|
(uint32_t)(signalyzer_h_side << 8));
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR + 1, 0x4040);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
|
|
SIGNALYZER_COMMAND_GPIO_STATE);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
#endif
|
|
}
|
|
/* ADAPTOR: EM_ARM_JTAG, EM_ARM_JTAG_P, EM_JTAG, EM_JTAG_P */
|
|
else if ((signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG) ||
|
|
(signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P) ||
|
|
(signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_JTAG) ||
|
|
(signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_JTAG_P)) {
|
|
if (signalyzer_h_adapter_type
|
|
== SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG)
|
|
LOG_INFO("Signalyzer: EM-ARM-JTAG (ARM JTAG) "
|
|
"detected. (HW: %2x).", (read_buf[1] >> 8));
|
|
else if (signalyzer_h_adapter_type
|
|
== SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P)
|
|
LOG_INFO("Signalyzer: EM-ARM-JTAG_P "
|
|
"(ARM JTAG with PSU) detected. (HW: %2x).",
|
|
(read_buf[1] >> 8));
|
|
else if (signalyzer_h_adapter_type
|
|
== SIGNALYZER_MODULE_TYPE_EM_JTAG)
|
|
LOG_INFO("Signalyzer: EM-JTAG (Generic JTAG) "
|
|
"detected. (HW: %2x).", (read_buf[1] >> 8));
|
|
else if (signalyzer_h_adapter_type
|
|
== SIGNALYZER_MODULE_TYPE_EM_JTAG_P)
|
|
LOG_INFO("Signalyzer: EM-JTAG-P "
|
|
"(Generic JTAG with PSU) detected. (HW: %2x).",
|
|
(read_buf[1] >> 8));
|
|
|
|
nTRST = 0x02;
|
|
nTRSTnOE = 0x04;
|
|
nSRST = 0x08;
|
|
nSRSTnOE = 0x10;
|
|
|
|
low_output = 0x08;
|
|
low_direction = 0x1b;
|
|
|
|
high_output = 0x0;
|
|
high_direction = 0x1f;
|
|
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
|
|
high_output |= nTRSTnOE;
|
|
high_output &= ~nTRST;
|
|
} else {
|
|
high_output &= ~nTRSTnOE;
|
|
high_output |= nTRST;
|
|
}
|
|
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL) {
|
|
high_output &= ~nSRSTnOE;
|
|
high_output |= nSRST;
|
|
} else {
|
|
high_output |= nSRSTnOE;
|
|
high_output &= ~nSRST;
|
|
}
|
|
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
/* enable power to the module */
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
|
|
((uint32_t)(signalyzer_h_side << 8) | 0x01));
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR,
|
|
SIGNALYZER_COMMAND_POWERCONTROL_SET);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
/* set gpio mode register (IO_16 and IO_17 set as analog
|
|
* inputs, other is gpio)
|
|
*/
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
|
|
(uint32_t)(signalyzer_h_side << 8));
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR + 1, 0x0060);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR, SIGNALYZER_COMMAND_GPIO_MODE);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
/* set gpio register (all inputs, for -P modules,
|
|
* PSU will be turned off)
|
|
*/
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR,
|
|
(uint32_t)(signalyzer_h_side << 8));
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR + 1, 0x0000);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
status = signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR, SIGNALYZER_COMMAND_GPIO_STATE);
|
|
if (status != FT_OK) {
|
|
LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
|
|
ftd2xx_status_string(status));
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
#endif
|
|
} else if (signalyzer_h_adapter_type == 0x0000) {
|
|
LOG_INFO("Signalyzer: No external modules were detected.");
|
|
|
|
nTRST = 0x10;
|
|
nTRSTnOE = 0x10;
|
|
nSRST = 0x20;
|
|
nSRSTnOE = 0x20;
|
|
|
|
low_output = 0x08;
|
|
low_direction = 0x1b;
|
|
|
|
high_output = 0x0;
|
|
high_direction = 0x0;
|
|
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
|
|
low_direction &= ~nTRSTnOE; /* nTRST input */
|
|
low_output &= ~nTRST; /* nTRST = 0 */
|
|
} else {
|
|
low_direction |= nTRSTnOE; /* nTRST output */
|
|
low_output |= nTRST; /* nTRST = 1 */
|
|
}
|
|
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL) {
|
|
low_direction |= nSRSTnOE; /* nSRST output */
|
|
low_output |= nSRST; /* nSRST = 1 */
|
|
} else {
|
|
low_direction &= ~nSRSTnOE; /* nSRST input */
|
|
low_output &= ~nSRST; /* nSRST = 0 */
|
|
}
|
|
} else {
|
|
LOG_ERROR("Unknown module type is detected: %.4x",
|
|
signalyzer_h_adapter_type);
|
|
return ERROR_JTAG_DEVICE_ERROR;
|
|
}
|
|
|
|
/* initialize low byte of controller for jtag operation */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize Signalyzer-H layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
#if BUILD_FT2232_FTD2XX == 1
|
|
if (ftdi_device == FT_DEVICE_2232H) {
|
|
/* initialize high byte of controller for jtag operation */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize Signalyzer-H layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
}
|
|
#elif BUILD_FT2232_LIBFTDI == 1
|
|
if (ftdi_device == TYPE_2232H) {
|
|
/* initialize high byte of controller for jtag operation */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize Signalyzer-H layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
}
|
|
#endif
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static void signalyzer_h_reset(int trst, int srst)
|
|
{
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
|
|
/* ADAPTOR: EM_LT16_A */
|
|
if (signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_LT16_A) {
|
|
if (trst == 1) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
/* switch to output pin (output is low) */
|
|
low_direction |= nTRSTnOE;
|
|
else
|
|
/* switch output low */
|
|
low_output &= ~nTRST;
|
|
} else if (trst == 0) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
/* switch to input pin (high-Z + internal
|
|
* and external pullup) */
|
|
low_direction &= ~nTRSTnOE;
|
|
else
|
|
/* switch output high */
|
|
low_output |= nTRST;
|
|
}
|
|
|
|
if (srst == 1) {
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
/* switch output low */
|
|
low_output &= ~nSRST;
|
|
else
|
|
/* switch to output pin (output is low) */
|
|
low_direction |= nSRSTnOE;
|
|
} else if (srst == 0) {
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
/* switch output high */
|
|
low_output |= nSRST;
|
|
else
|
|
/* switch to input pin (high-Z) */
|
|
low_direction &= ~nSRSTnOE;
|
|
}
|
|
|
|
/* command "set data bits low byte" */
|
|
buffer_write(0x80);
|
|
buffer_write(low_output);
|
|
buffer_write(low_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, "
|
|
"low_direction: 0x%2.2x",
|
|
trst, srst, low_output, low_direction);
|
|
}
|
|
/* ADAPTOR: EM_ARM_JTAG, EM_ARM_JTAG_P, EM_JTAG, EM_JTAG_P */
|
|
else if ((signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG) ||
|
|
(signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P) ||
|
|
(signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_JTAG) ||
|
|
(signalyzer_h_adapter_type == SIGNALYZER_MODULE_TYPE_EM_JTAG_P)) {
|
|
if (trst == 1) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
high_output &= ~nTRSTnOE;
|
|
else
|
|
high_output &= ~nTRST;
|
|
} else if (trst == 0) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
high_output |= nTRSTnOE;
|
|
else
|
|
high_output |= nTRST;
|
|
}
|
|
|
|
if (srst == 1) {
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
high_output &= ~nSRST;
|
|
else
|
|
high_output &= ~nSRSTnOE;
|
|
} else if (srst == 0) {
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
high_output |= nSRST;
|
|
else
|
|
high_output |= nSRSTnOE;
|
|
}
|
|
|
|
/* command "set data bits high byte" */
|
|
buffer_write(0x82);
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
LOG_INFO("trst: %i, srst: %i, high_output: 0x%2.2x, "
|
|
"high_direction: 0x%2.2x",
|
|
trst, srst, high_output, high_direction);
|
|
} else if (signalyzer_h_adapter_type == 0x0000) {
|
|
if (trst == 1) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
/* switch to output pin (output is low) */
|
|
low_direction |= nTRSTnOE;
|
|
else
|
|
/* switch output low */
|
|
low_output &= ~nTRST;
|
|
} else if (trst == 0) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
/* switch to input pin (high-Z + internal
|
|
* and external pullup) */
|
|
low_direction &= ~nTRSTnOE;
|
|
else
|
|
/* switch output high */
|
|
low_output |= nTRST;
|
|
}
|
|
|
|
if (srst == 1) {
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
/* switch output low */
|
|
low_output &= ~nSRST;
|
|
else
|
|
/* switch to output pin (output is low) */
|
|
low_direction |= nSRSTnOE;
|
|
} else if (srst == 0) {
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
/* switch output high */
|
|
low_output |= nSRST;
|
|
else
|
|
/* switch to input pin (high-Z) */
|
|
low_direction &= ~nSRSTnOE;
|
|
}
|
|
|
|
/* command "set data bits low byte" */
|
|
buffer_write(0x80);
|
|
buffer_write(low_output);
|
|
buffer_write(low_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, "
|
|
"low_direction: 0x%2.2x",
|
|
trst, srst, low_output, low_direction);
|
|
}
|
|
}
|
|
|
|
static void signalyzer_h_blink(void)
|
|
{
|
|
signalyzer_h_led_set(signalyzer_h_side, SIGNALYZER_LED_RED, 100, 0, 1);
|
|
}
|
|
|
|
/********************************************************************
|
|
* Support for KT-LINK
|
|
* JTAG adapter from KRISTECH
|
|
* http://www.kristech.eu
|
|
*******************************************************************/
|
|
static int ktlink_init(void)
|
|
{
|
|
uint8_t swd_en = 0x20; /* 0x20 SWD disable, 0x00 SWD enable (ADBUS5) */
|
|
|
|
low_output = 0x08 | swd_en; /* value; TMS=1,TCK=0,TDI=0,SWD=swd_en */
|
|
low_direction = 0x3B; /* out=1; TCK/TDI/TMS=out,TDO=in,SWD=out,RTCK=in,SRSTIN=in */
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'ktlink' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
nTRST = 0x01;
|
|
nSRST = 0x02;
|
|
nTRSTnOE = 0x04;
|
|
nSRSTnOE = 0x08;
|
|
|
|
high_output = 0x80; /* turn LED on */
|
|
high_direction = 0xFF; /* all outputs */
|
|
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) {
|
|
high_output |= nTRSTnOE;
|
|
high_output &= ~nTRST;
|
|
} else {
|
|
high_output &= ~nTRSTnOE;
|
|
high_output |= nTRST;
|
|
}
|
|
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL) {
|
|
high_output &= ~nSRSTnOE;
|
|
high_output |= nSRST;
|
|
} else {
|
|
high_output |= nSRSTnOE;
|
|
high_output &= ~nSRST;
|
|
}
|
|
|
|
/* initialize high byte for jtag */
|
|
if (ft2232_set_data_bits_high_byte(high_output, high_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'ktlink' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static void ktlink_reset(int trst, int srst)
|
|
{
|
|
enum reset_types jtag_reset_config = jtag_get_reset_config();
|
|
|
|
if (trst == 1) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
high_output &= ~nTRSTnOE;
|
|
else
|
|
high_output &= ~nTRST;
|
|
} else if (trst == 0) {
|
|
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
|
|
high_output |= nTRSTnOE;
|
|
else
|
|
high_output |= nTRST;
|
|
}
|
|
|
|
if (srst == 1) {
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
high_output &= ~nSRST;
|
|
else
|
|
high_output &= ~nSRSTnOE;
|
|
} else if (srst == 0) {
|
|
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
|
|
high_output |= nSRST;
|
|
else
|
|
high_output |= nSRSTnOE;
|
|
}
|
|
|
|
buffer_write(0x82); /* command "set data bits high byte" */
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x",
|
|
trst,
|
|
srst,
|
|
high_output,
|
|
high_direction);
|
|
}
|
|
|
|
static void ktlink_blink(void)
|
|
{
|
|
/* LED connected to ACBUS7 */
|
|
high_output ^= 0x80;
|
|
|
|
buffer_write(0x82); /* command "set data bits high byte" */
|
|
buffer_write(high_output);
|
|
buffer_write(high_direction);
|
|
}
|
|
|
|
/********************************************************************
|
|
* Support for Digilent HS-1
|
|
* JTAG adapter from Digilent
|
|
* http://www.digilent.com
|
|
* Author: Stephane Bonnet bonnetst@hds.utc.fr
|
|
*******************************************************************/
|
|
|
|
static int digilent_hs1_init(void)
|
|
{
|
|
/* the adapter only supports the base JTAG signals, no nTRST
|
|
nor nSRST */
|
|
low_output = 0x88;
|
|
low_direction = 0x8b;
|
|
|
|
/* initialize low byte for jtag */
|
|
if (ft2232_set_data_bits_low_byte(low_output, low_direction) != ERROR_OK) {
|
|
LOG_ERROR("couldn't initialize FT2232 with 'digilent_hs1' layout");
|
|
return ERROR_JTAG_INIT_FAILED;
|
|
}
|
|
return ERROR_OK;
|
|
}
|
|
|
|
static void digilent_hs1_reset(int trst, int srst)
|
|
{
|
|
/* Dummy function, no reset signals supported. */
|
|
}
|
|
|
|
static const struct command_registration ft2232_command_handlers[] = {
|
|
{
|
|
.name = "ft2232_device_desc",
|
|
.handler = &ft2232_handle_device_desc_command,
|
|
.mode = COMMAND_CONFIG,
|
|
.help = "set the USB device description of the FTDI FT2232 device",
|
|
.usage = "description_string",
|
|
},
|
|
{
|
|
.name = "ft2232_serial",
|
|
.handler = &ft2232_handle_serial_command,
|
|
.mode = COMMAND_CONFIG,
|
|
.help = "set the serial number of the FTDI FT2232 device",
|
|
.usage = "serial_string",
|
|
},
|
|
{
|
|
.name = "ft2232_layout",
|
|
.handler = &ft2232_handle_layout_command,
|
|
.mode = COMMAND_CONFIG,
|
|
.help = "set the layout of the FT2232 GPIO signals used "
|
|
"to control output-enables and reset signals",
|
|
.usage = "layout_name",
|
|
},
|
|
{
|
|
.name = "ft2232_vid_pid",
|
|
.handler = &ft2232_handle_vid_pid_command,
|
|
.mode = COMMAND_CONFIG,
|
|
.help = "the vendor ID and product ID of the FTDI FT2232 device",
|
|
.usage = "(vid pid)* ",
|
|
},
|
|
{
|
|
.name = "ft2232_latency",
|
|
.handler = &ft2232_handle_latency_command,
|
|
.mode = COMMAND_CONFIG,
|
|
.help = "set the FT2232 latency timer to a new value",
|
|
.usage = "value",
|
|
},
|
|
{
|
|
.name = "ft2232_channel",
|
|
.handler = &ft2232_handle_channel_command,
|
|
.mode = COMMAND_CONFIG,
|
|
.help = "set the FT2232 channel to a new value",
|
|
.usage = "value",
|
|
},
|
|
COMMAND_REGISTRATION_DONE
|
|
};
|
|
|
|
struct jtag_interface ft2232_interface = {
|
|
.name = "ft2232",
|
|
.supported = DEBUG_CAP_TMS_SEQ,
|
|
.commands = ft2232_command_handlers,
|
|
.transports = jtag_only,
|
|
|
|
.init = ft2232_init,
|
|
.quit = ft2232_quit,
|
|
.speed = ft2232_speed,
|
|
.speed_div = ft2232_speed_div,
|
|
.khz = ft2232_khz,
|
|
.execute_queue = ft2232_execute_queue,
|
|
};
|