Robert Jarzmik 18e15390df drivers/jtag: usb_blaster add pin controls ... Add pin controls (pin6 and pin8). These pins can be controled either : - with a fixed value (0 or 1) - by TRST or SRST reset signal (driven low when signal activated). Change-Id: Ie6a3e57fc6ba6a38fdb9a009c976e3febab8f578 Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-on: http://openocd.zylin.com/1448 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins		2013-06-29 10:05:59 +00:00
..
flash	flash/nor/spi: uniform all hex data to lowercase	2013-06-21 15:37:40 +00:00
helper	libusb1_common, ftdi: clarify libusb_open error message	2013-06-12 14:40:16 +00:00
jtag	drivers/jtag: usb_blaster add pin controls	2013-06-29 10:05:59 +00:00
pld	update files to correct FSF address	2013-06-05 19:52:42 +00:00
rtos	update files to correct FSF address	2013-06-05 19:52:42 +00:00
server	update files to correct FSF address	2013-06-05 19:52:42 +00:00
svf	update files to correct FSF address	2013-06-05 19:52:42 +00:00
target	hla: Add Simulated DCC register for target communicaton	2013-06-14 11:18:57 +00:00
transport	update files to correct FSF address	2013-06-05 19:52:42 +00:00
xsvf	update files to correct FSF address	2013-06-05 19:52:42 +00:00
hello.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
hello.h	update files to correct FSF address	2013-06-05 19:52:42 +00:00
main.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
Makefile.am	drivers/jtag: rewrite usb_blaster driver	2013-06-04 20:00:42 +00:00
openocd.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
openocd.h	update files to correct FSF address	2013-06-05 19:52:42 +00:00