38ac08c1c2
Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
35 lines
977 B
INI
35 lines
977 B
INI
adapter speed 10000
|
|
|
|
adapter driver ftdi
|
|
ftdi_device_desc "Dual RS232-HS"
|
|
ftdi_vid_pid 0x0403 0x6010
|
|
|
|
ftdi_layout_init 0x0008 0x001b
|
|
ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
|
|
|
|
#Reset Stretcher logic on FE310 is ~1 second long
|
|
#This doesn't apply if you use
|
|
# ftdi_set_signal, but still good to document
|
|
#adapter srst delay 1500
|
|
|
|
set _CHIPNAME riscv
|
|
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913
|
|
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME riscv -chain-position $_TARGETNAME
|
|
$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
|
|
|
|
flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME
|
|
init
|
|
#reset -- This type of reset is not implemented yet
|
|
if {[ info exists pulse_srst]} {
|
|
ftdi_set_signal nSRST 0
|
|
ftdi_set_signal nSRST z
|
|
#Wait for the reset stretcher
|
|
#It will work without this, but
|
|
#will incur lots of delays for later commands.
|
|
sleep 1500
|
|
}
|
|
halt
|
|
flash protect 0 64 last off
|