afbad69d97
niietcm4_write() buffer padding: add correct buffer padding for 16 bytes. Args check in FLASH_BANK_COMMAND_HANDLER(): first version of the driver had 7 args, current - 6. This patch will fix error when flash is rejected (current k1921vk01t.cfg has flash bank init with 6 args). Timeouts in flash flag checking procedure: increase timeouts in niietcm4_opstatus_check() and niietcm4_uopstatus_check() cause there were problems in some hardware configurations. JTAG ID: wrong id in k1921vk01t.cfg replaced with right one. Signed-off-by: Bogdan Kolbov <kolbov@niiet.ru> Change-Id: I84296ba3eb4eeda4d4a68b18c94666f1269a500f Reviewed-on: http://openocd.zylin.com/3171 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
56 lines
1.2 KiB
INI
Executable File
56 lines
1.2 KiB
INI
Executable File
# K1921VK01T
|
|
# http://niiet.ru/chips/nis?id=354
|
|
|
|
source [find target/swj-dp.tcl]
|
|
source [find mem_helper.tcl]
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME k1921vk01t
|
|
}
|
|
|
|
set _ENDIAN little
|
|
|
|
# Work-area is a space in RAM used for flash programming
|
|
if { [info exists WORKAREASIZE] } {
|
|
set _WORKAREASIZE $WORKAREASIZE
|
|
} else {
|
|
set _WORKAREASIZE 0x10000
|
|
}
|
|
|
|
#jtag scan chain
|
|
if { [info exists CPUTAPID] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
if { [using_jtag] } {
|
|
set _CPUTAPID 0x4ba00477
|
|
} {
|
|
# SWD IDCODE
|
|
set _CPUTAPID 0x2ba01477
|
|
}
|
|
}
|
|
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
|
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
|
|
|
|
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
|
|
|
flash bank $_CHIPNAME.flash niietcm4 0 0 0 0 $_TARGETNAME
|
|
|
|
adapter_khz 2000
|
|
|
|
adapter_nsrst_delay 100
|
|
if {[using_jtag]} {
|
|
jtag_ntrst_delay 100
|
|
}
|
|
|
|
reset_config srst_nogate
|
|
|
|
if {![using_hla]} {
|
|
# if srst is not fitted use SYSRESETREQ to
|
|
# perform a soft reset
|
|
cortex_m reset_config sysresetreq
|
|
}
|