Steve Marple 290eac04b9 drivers/linuxgpiod: Migrate to adapter gpio commands ... Use the new "adapter gpio" commands to configure the GPIOs used by the linuxgpiod driver. Adds support for drive mode and resistor pull options on all signals. Change-Id: Ic90cb4f06db82435294228b6793330107a9f3606 Signed-off-by: Steve Marple <stevemarple@googlemail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7048 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>		2022-08-15 13:24:54 +00:00
..
flash	target: add API to temporarily mask target polling	2022-08-15 13:22:06 +00:00
helper	target: add API to temporarily mask target polling	2022-08-15 13:22:06 +00:00
jtag	drivers/linuxgpiod: Migrate to adapter gpio commands	2022-08-15 13:24:54 +00:00
pld	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
rtos	rtos: Support for "none" rtos	2022-08-15 13:19:21 +00:00
rtt	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
server	gdb_server: custom target-specific GDB queries	2022-08-15 13:23:05 +00:00
svf	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
target	target/cortex_m: supress historical reset detection	2022-08-15 13:23:57 +00:00
transport	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
xsvf	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
Makefile.am	openocd: build: add SPDX tag	2022-07-23 13:06:38 +00:00
hello.c	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
hello.h	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
main.c	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
openocd.c	openocd: prevent target polling during 'init'	2022-08-15 13:22:18 +00:00
openocd.h	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00