3bccc77999
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/interface | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: I7bd6a628e9e153fc477cddf9b97087a39ec48aa7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7029
Tested-by: jenkins
31 lines
929 B
INI
31 lines
929 B
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#
|
|
# Configuration file for NXP MC-IMX8MP-EVK on-board internal JTAG
|
|
#
|
|
# Using this interface requires enabling "remote mode" for the board using the
|
|
# NXP bcu tool (see https://github.com/NXPmicro/bcu)
|
|
#
|
|
# bcu set_gpio remote_en 1 -board=imx8mpevk
|
|
#
|
|
# The REMOTE_EN gpio is accessible through the same FTDI adapter but it's
|
|
# behind an I2C GPIO expander.
|
|
#
|
|
|
|
adapter driver ftdi
|
|
ftdi vid_pid 0x0403 0x6011
|
|
ftdi channel 0
|
|
|
|
ftdi layout_init 0x00f8 0x000b
|
|
|
|
ftdi layout_signal RESET_B -data 0x0010 -oe 0x0010
|
|
# Called SYS_nRST in schematics
|
|
ftdi layout_signal nSRST -data 0x0020 -oe 0x0020
|
|
ftdi layout_signal IO_nRST -data 0x0040 -oe 0x0040
|
|
ftdi layout_signal ONOFF_B -data 0x0080 -oe 0x0080
|
|
|
|
ftdi layout_signal GPIO1 -data 0x0100 -oe 0x0100
|
|
ftdi layout_signal GPIO2 -data 0x0200 -oe 0x0200
|
|
ftdi layout_signal GPIO3 -data 0x0400 -oe 0x0400
|
|
ftdi layout_signal GPIO4 -data 0x0800 -oe 0x0800
|