d4e195ad1b
Some boards might have RCLK omitted from the JTAG connector and if the interface claims support for it, OpenOCD will end up trying to use RCLK while it's actually impossible. This is a "cd tcl/target; sed -i s/jtag_rclk/adapter_khz/g *" patch. Change-Id: Iee7337107bc1457966b104389ba9db75a9c860b4 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1695 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
23 lines
778 B
INI
23 lines
778 B
INI
######################################
|
|
# Target: Atmel AT91SAM9G20
|
|
######################################
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set AT91_CHIPNAME $CHIPNAME
|
|
} else {
|
|
set AT91_CHIPNAME at91sam9g20
|
|
}
|
|
|
|
source [find target/at91sam9.cfg]
|
|
|
|
# Set fallback clock to 1/6 of worst-case clock speed (which would be the 32.768 kHz slow clock).
|
|
|
|
adapter_khz 5
|
|
|
|
# Establish internal SRAM memory work areas that are important to pre-bootstrap loaders, etc. The
|
|
# AT91SAM9G20 has two SRAM areas, one starting at 0x00200000 and the other starting at 0x00300000.
|
|
# Both areas are 16 kB long.
|
|
|
|
#$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 1
|
|
$_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x4000 -work-area-backup 1
|