4157732bd8
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/board | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7028
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
37 lines
1022 B
INI
37 lines
1022 B
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
adapter speed 10000
|
|
|
|
adapter driver ftdi
|
|
ftdi device_desc "Dual RS232-HS"
|
|
ftdi vid_pid 0x0403 0x6010
|
|
|
|
ftdi layout_init 0x0008 0x001b
|
|
ftdi layout_signal nSRST -oe 0x0020 -data 0x0020
|
|
|
|
#Reset Stretcher logic on FE310 is ~1 second long
|
|
#This doesn't apply if you use
|
|
# ftdi set_signal, but still good to document
|
|
#adapter srst delay 1500
|
|
|
|
set _CHIPNAME riscv
|
|
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913
|
|
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME riscv -chain-position $_TARGETNAME
|
|
$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
|
|
|
|
flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME
|
|
init
|
|
#reset -- This type of reset is not implemented yet
|
|
if {[ info exists pulse_srst]} {
|
|
ftdi set_signal nSRST 0
|
|
ftdi set_signal nSRST z
|
|
#Wait for the reset stretcher
|
|
#It will work without this, but
|
|
#will incur lots of delays for later commands.
|
|
sleep 1500
|
|
}
|
|
halt
|
|
flash protect 0 64 last off
|