4157732bd8
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/board | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7028
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
20 lines
623 B
INI
20 lines
623 B
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
# Config for Gumstix Verdex XM4 and XL6P (PXA270)
|
|
|
|
set CHIPNAME verdex
|
|
source [find target/pxa270.cfg]
|
|
|
|
# The board supports separate reset lines
|
|
# Override this in the interface config for parallel dongles
|
|
reset_config trst_and_srst separate
|
|
|
|
# XM4 = 400MHz, XL6P = 600MHz...let's run at 0.1*400MHz=40MHz
|
|
adapter speed 40000
|
|
|
|
# flash bank <driver> <base> <size> <chip_width> <bus_width>
|
|
# XL6P has 32 MB flash
|
|
flash bank $_CHIPNAME.flash0 cfi 0x00000000 0x02000000 2 2 $_TARGETNAME
|
|
# XM4 has 16 MB flash
|
|
#flash bank $_CHIPNAME.flash0 cfi 0x00000000 0x01000000 2 2 $_TARGETNAME
|