3bccc77999
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/interface | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: I7bd6a628e9e153fc477cddf9b97087a39ec48aa7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7029
Tested-by: jenkins
38 lines
945 B
INI
38 lines
945 B
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#
|
|
# Config for using NXP IMX CPU
|
|
#
|
|
# This is best used with a fast enough buffer but also
|
|
# is suitable for direct connection if the target voltage
|
|
# matches to host voltage and the cable is short enough.
|
|
#
|
|
#
|
|
|
|
adapter driver imx_gpio
|
|
|
|
# For most IMX processors 0x0209c000
|
|
imx_gpio_peripheral_base 0x0209c000
|
|
|
|
# Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
|
|
# These depend on system clock, calibrated for IMX6UL@528MHz
|
|
# imx_gpio_speed SPEED_COEFF SPEED_OFFSET
|
|
imx_gpio_speed_coeffs 50000 50
|
|
|
|
# Each of the JTAG lines need a gpio number set: tck tms tdi tdo.
|
|
# Example configuration:
|
|
# imx_gpio_jtag_nums 6 7 8 9
|
|
|
|
# SWD interface pins: swclk swdio
|
|
# Example configuration:
|
|
imx_gpio_swd_nums 1 6
|
|
|
|
# imx_gpio_trst_num 10
|
|
# reset_config trst_only
|
|
|
|
# imx_gpio_srst_num 11
|
|
# reset_config srst_only srst_push_pull
|
|
|
|
# or if you have both connected,
|
|
# reset_config trst_and_srst srst_push_pull
|