e44539d66c
- write speed up to 150 kByte/s on STM32F469I-disco (due to SWD clock and USB connection), up to 1 MByte/s on Nucleo-F767ZI with external STLink-V3 or Nucleo-G474RE with two W25Q256FV in dual 4-line mode or STM32H73BI-Disco in octal mode - tested with STM32L476G-disco (64MBit flash, 3-byte addr), STM32F412G-Disco, STM32F469I-Disco, STM32F746G-Disco, and STM32L476G-Disco (all 128Mbit flash, 3-byte addr), STM32F723E-Disco, STM32F769I-Disco (512Mbit flash, 4-byte addr) STM32L4R9I-Disco, STM32L4P5G-Disco (512MBit octo-flash, DTR, 4-byte addr) STM32H745I-Disco, STM32H747I-Disco (two 512MBit flash, 4-byte addr) STM32H73BI-Disco, STM32H735G-Disco (512MBit octo-flash, DTR, 4-byte addr) - suitable cfg for Discovery boards included - limited parsing of SFDP data if flash device not hardcoded (tested only in single/quad mode as most devices either don't support SFDP at all or have empty(!) SFDP memory) - 'set' command for auto detection override (e. g. for EEPROMs) - 'cmd' command for arbitrary SPI commands (reconfiguration, testing etc.) - makefile for creation of binary loader files - tcl/board/stm32f469discovery.cfg superseded by stm32f469i-disco.cfg - tcl/board/stm32f7discovery.cfg removed as name is ambiguous (superseded by stm32f746g-disco.cfg vs. stm32f769i-disco.cfg) - dual 4-line mode tested on Nucleo-F767ZI, Nucleo-H743ZI and Nucleo-H7A3ZI-Q with two W25Q256FV, and on Nucleo-L496ZP-P and Nucleo-L4R5ZI with two W25Q128FV, sample cfg files included and on STM32H745I-Disco, STM32H747I-Disco, STM32H750B-Disco - read/verify/erase_check uses indirect read mode to work around silicon bug in H7, L4+ and MP1 memory mapped mode (last bytes not readable, accessing last bytes causes debug interface to hang) - octospi supported only in single/dual 1-line, 2-line, 4-line and single 8-line modes, (not in hyper flash mode) Requirements: GPIOs must be initialized appropriately, and SPI flash chip be configured appropriately (1-line ..., QPI, 4-byte addresses ...). This is board/chip specific, cf. included cfg files. The driver infers most parameters from current setting in CR, CCR, ... registers. Change-Id: I54858fbbe8758c3a5fe58812e93f5f39514704f8 Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-on: http://openocd.zylin.com/4321 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Christopher Head <chead@zaber.com>
56 lines
2.4 KiB
C
56 lines
2.4 KiB
C
/***************************************************************************
|
|
* Copyright (C) 2009 Zachary T Welch <zw@superlucidity.net> *
|
|
* *
|
|
* This program is free software; you can redistribute it and/or modify *
|
|
* it under the terms of the GNU General Public License as published by *
|
|
* the Free Software Foundation; either version 2 of the License, or *
|
|
* (at your option) any later version. *
|
|
* *
|
|
* This program is distributed in the hope that it will be useful, *
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
|
* GNU General Public License for more details. *
|
|
* *
|
|
* You should have received a copy of the GNU General Public License *
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>. *
|
|
***************************************************************************/
|
|
|
|
#ifndef OPENOCD_FLASH_NOR_IMP_H
|
|
#define OPENOCD_FLASH_NOR_IMP_H
|
|
|
|
#include <stdbool.h>
|
|
|
|
/* this is an internal header */
|
|
#include "core.h"
|
|
#include "driver.h"
|
|
/* almost all drivers will need this file */
|
|
#include <target/target.h>
|
|
|
|
/**
|
|
* Adds a new NOR bank to the global list of banks.
|
|
* @param bank The bank that should be added.
|
|
*/
|
|
void flash_bank_add(struct flash_bank *bank);
|
|
|
|
/**
|
|
* @return The first bank in the global list.
|
|
*/
|
|
struct flash_bank *flash_bank_list(void);
|
|
|
|
int flash_driver_erase(struct flash_bank *bank, unsigned int first,
|
|
unsigned int last);
|
|
int flash_driver_protect(struct flash_bank *bank, int set, unsigned int first,
|
|
unsigned int last);
|
|
int flash_driver_write(struct flash_bank *bank,
|
|
const uint8_t *buffer, uint32_t offset, uint32_t count);
|
|
int flash_driver_read(struct flash_bank *bank,
|
|
uint8_t *buffer, uint32_t offset, uint32_t count);
|
|
int flash_driver_verify(struct flash_bank *bank,
|
|
const uint8_t *buffer, uint32_t offset, uint32_t count);
|
|
|
|
/* write (optional verify) an image to flash memory of the given target */
|
|
int flash_write_unlock_verify(struct target *target, struct image *image,
|
|
uint32_t *written, bool erase, bool unlock, bool write, bool verify);
|
|
|
|
#endif /* OPENOCD_FLASH_NOR_IMP_H */
|