openocd/src/jtag/drivers/libusb0_common.h
Antonio Borneo ff5d13a5f8 libusb0: add compatibility define for transfer type bulk
For compatibility with libusb1, define LIBUSB_TRANSFER_TYPE_BULK
in libusb0.
Remove the #ifdef HAVE_LIBUSB1 in jtag/driver/aice

This also fixes a compile error in jtag/drivers/openjtag with
libusb0.

Change-Id: I827b77eac10216759eb31aab461b2b63cabaf195
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4700
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2018-12-11 13:29:21 +00:00

75 lines
3.5 KiB
C

/***************************************************************************
* Copyright (C) 2009 by Zachary T Welch <zw@superlucidity.net> *
* *
* Copyright (C) 2011 by Mauro Gamba <maurillo71@gmail.com> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
#ifndef OPENOCD_JTAG_DRIVERS_LIBUSB0_COMMON_H
#define OPENOCD_JTAG_DRIVERS_LIBUSB0_COMMON_H
#include <usb.h>
#define jtag_libusb_device usb_device
#define jtag_libusb_device_handle usb_dev_handle
#define jtag_libusb_device_descriptor usb_device_descriptor
#define jtag_libusb_interface usb_interface
#define jtag_libusb_interface_descriptor usb_interface_descriptor
#define jtag_libusb_endpoint_descriptor usb_endpoint_descriptor
#define jtag_libusb_config_descriptor usb_config_descriptor
#define jtag_libusb_reset_device(dev) usb_reset(dev)
#define jtag_libusb_get_device(devh) usb_device(devh)
/* make some defines compatible to libusb1 */
#define LIBUSB_REQUEST_TYPE_VENDOR USB_TYPE_VENDOR
#define LIBUSB_RECIPIENT_DEVICE USB_RECIP_DEVICE
#define LIBUSB_ENDPOINT_OUT USB_ENDPOINT_OUT
#define LIBUSB_ENDPOINT_IN USB_ENDPOINT_IN
#define LIBUSB_TRANSFER_TYPE_BULK USB_ENDPOINT_TYPE_BULK
static inline int jtag_libusb_claim_interface(jtag_libusb_device_handle *devh,
int iface)
{
return usb_claim_interface(devh, iface);
};
static inline int jtag_libusb_release_interface(jtag_libusb_device_handle *devh,
int iface)
{
return usb_release_interface(devh, iface);
}
int jtag_libusb_open(const uint16_t vids[], const uint16_t pids[],
const char *serial,
struct jtag_libusb_device_handle **out);
void jtag_libusb_close(jtag_libusb_device_handle *dev);
int jtag_libusb_control_transfer(jtag_libusb_device_handle *dev,
uint8_t requestType, uint8_t request, uint16_t wValue,
uint16_t wIndex, char *bytes, uint16_t size, unsigned int timeout);
int jtag_libusb_bulk_write(struct jtag_libusb_device_handle *dev, int ep,
char *bytes, int size, int timeout);
int jtag_libusb_bulk_read(struct jtag_libusb_device_handle *dev, int ep,
char *bytes, int size, int timeout);
int jtag_libusb_set_configuration(jtag_libusb_device_handle *devh,
int configuration);
int jtag_libusb_choose_interface(struct jtag_libusb_device_handle *devh,
unsigned int *usb_read_ep,
unsigned int *usb_write_ep,
int bclass, int subclass, int protocol, int trans_type);
int jtag_libusb_get_pid(struct jtag_libusb_device *dev, uint16_t *pid);
#endif /* OPENOCD_JTAG_DRIVERS_LIBUSB0_COMMON_H */