3c8aa12859
If watchdog is enabled, there's no way we can disable it while the flashing firmware is running. (Halt disables it, but software reset doesn't.) So let's have the flashing firmware refresh the watchdog regularly, in case it has been enabled by previously running software. Failure to do so could lead to a watchdog reset in the middle of the chip bieng programmed. Change-Id: I79d41593948aae0080480e891552e1c2ee3ccbd0 Signed-off-by: Aurélien Martin <martaurel@gmail.com> Reviewed-on: http://openocd.zylin.com/5266 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> |
||
---|---|---|
.. | ||
checksum | ||
debug/xscale | ||
erase_check | ||
flash | ||
watchdog | ||
Makefile | ||
README |
Included in these directories are the src to the various ram loaders used within openocd. ** target checksum loaders ** checksum/armv4_5_crc.s : - ARMv4 and ARMv5 checksum loader : see target/arm_crc_code.c:arm_crc_code checksum/armv7m_crc.s : - ARMv7m checksum loader : see target/armv7m.c:cortex_m_crc_code checksum/mips32.s : - MIPS32 checksum loader : see target/mips32.c:mips_crc_code ** target flash loaders ** flash/pic32mx.s : - Microchip PIC32 flash loader : see flash/nor/pic32mx.c:pic32mx_flash_write_code flash/stellaris.s : - TI Stellaris flash loader : see flash/nor/stellaris.c:stellaris_write_code flash/stm32x.s : - ST STM32 flash loader : see flash/nor/stm32x.c:stm32x_flash_write_code flash/str7x.s : - ST STR7 flash loader : see flash/nor/str7x.c:str7x_flash_write_code flash/str9x.s : - ST STR9 flash loader : see flash/nor/str9x.c:str9x_flash_write_code Spencer Oliver spen@spen-soft.co.uk