4157732bd8
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/board | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7028
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
22 lines
680 B
INI
22 lines
680 B
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#
|
|
# http://wikidevi.com/wiki/Asus_RT-N66U
|
|
#
|
|
|
|
echo "ATTENTION: you need to solder a 4.7-10k pullup resistor to pin 21 of flash IC"
|
|
echo "to enable JTAG, see http://wl500g.info/album.php?albumid=28&attachmentid=8991 ,"
|
|
echo "there is an unpopulated footprint near U8.\n"
|
|
|
|
set partition_list {
|
|
CFE { Bootloader 0xbc000000 0x00040000 }
|
|
firmware { "Kernel+rootfs" 0xbc040000 0x01fa0000 }
|
|
nvram { "Config space" 0xbdfe0000 0x00020000 }
|
|
}
|
|
|
|
source [find target/bcm4706.cfg]
|
|
|
|
# External 32MB NOR Flash (Spansion S29GL256P10TF101
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME cfi 0xbc000000 0x02000000 2 2 $_TARGETNAME
|