27b98c2fa5
While "flash bank" syntax has been changed long ago, several tcl script are still not fully update. Fix following cases related with "cfi" driver: - syntax error: the mandatory <name> parameter is missing - warning: the <target> parameter is a number, instead of the target name - the comment line above the command does not report actual syntax Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
38 lines
1.1 KiB
INI
38 lines
1.1 KiB
INI
# Target Configuration for the TinCanTools S3C2410 Based Hammer Module
|
|
# http://www.tincantools.com
|
|
|
|
source [find target/samsung_s3c2410.cfg]
|
|
|
|
$_TARGETNAME configure -event reset-init {
|
|
# Reset Script for the TinCanTools S3C2410 Based Hammer Module
|
|
# http://www.tincantools.com
|
|
#
|
|
# Setup primary clocks and initialize the SDRAM
|
|
mww 0x53000000 0x00000000
|
|
mww 0x4a000008 0xffffffff
|
|
mww 0x4a00000c 0x000007ff
|
|
mww 0x4c000000 0x00ffffff
|
|
mww 0x4c000014 0x00000003
|
|
mww 0x4c000004 0x000a1031
|
|
mww 0x48000000 0x11111122
|
|
mww 0x48000004 0x00000700
|
|
mww 0x48000008 0x00000700
|
|
mww 0x4800000c 0x00000700
|
|
mww 0x48000010 0x00000700
|
|
mww 0x48000014 0x00000700
|
|
mww 0x48000018 0x00000700
|
|
mww 0x4800001c 0x00018005
|
|
mww 0x48000020 0x00018005
|
|
mww 0x48000024 0x009c0459
|
|
mww 0x48000028 0x000000b2
|
|
mww 0x4800002c 0x00000030
|
|
mww 0x48000030 0x00000030
|
|
flash probe 0
|
|
}
|
|
|
|
|
|
#flash configuration
|
|
#flash bank <name> <driver> <base> <size> <chip_width> <bus_width> <target> [driver_options ...]
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME cfi 0x00000000 0x1000000 2 2 $_TARGETNAME
|