openocd/tcl/board/imx27lnst.cfg
Antonio Borneo 38ac08c1c2 tcl: replace the deprecated commands with "adapter ..."
Avoid annoying "deprecated" messages while running the scripts
distributed with OpenOCD code.
Change automatically created with commands
	sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f)

Minor indentation issue fixed manually in
	tcl/board/at91sam9g20-ek.cfg
	tcl/target/at91sam9260_ext_RAM_ext_flash.cfg

Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5284
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-01-29 06:34:43 +00:00

60 lines
1.3 KiB
INI

# The Linuxstamp-mx27 is board has a single IMX27 chip
# For further info see http://opencircuits.com/Linuxstamp_mx27#OpenOCD
source [find target/imx27.cfg]
$_TARGETNAME configure -event gdb-attach { reset init }
$_TARGETNAME configure -event reset-init { imx27lnst_init }
proc imx27lnst_init { } {
# This setup puts RAM at 0xA0000000
# reset the board correctly
adapter speed 500
reset run
reset halt
mww 0x10000000 0x20040304
mww 0x10020000 0x00000000
mww 0x10000004 0xDFFBFCFB
mww 0x10020004 0xFFFFFFFF
sleep 100
# ========================================
# Configure DDR on CSD0 -- initial reset
# ========================================
mww 0xD8001010 0x00000008
sleep 100
# ========================================
# Configure DDR on CSD0 -- wait 5000 cycle
# ========================================
mww 0x10027828 0x55555555
mww 0x10027830 0x55555555
mww 0x10027834 0x55555555
mww 0x10027838 0x00005005
mww 0x1002783C 0x15555555
mww 0xD8001010 0x00000004
mww 0xD8001004 0x00795729
#mww 0xD8001000 0x92200000
mww 0xD8001000 0x91120000
mww 0xA0000F00 0x0
#mww 0xD8001000 0xA2200000
mww 0xD8001000 0xA1120000
mww 0xA0000F00 0x0
mww 0xA0000F00 0x0
#mww 0xD8001000 0xB2200000
mww 0xD8001000 0xB1120000
mwb 0xA0000033 0xFF
mwb 0xA1000000 0xAA
#mww 0xD8001000 0x82228085
mww 0xD8001000 0x81128080
}