e6505b0489
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/ target| while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: I7b2610300b24cccd07bfa6fb5f1266970d5d3a1b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7027
Tested-by: jenkins
56 lines
1.5 KiB
INI
56 lines
1.5 KiB
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME aduc702x
|
|
}
|
|
|
|
if { [info exists ENDIAN] } {
|
|
set _ENDIAN $ENDIAN
|
|
} else {
|
|
# This config file was defaulting to big endian..
|
|
set _ENDIAN little
|
|
}
|
|
|
|
if { [info exists CPUTAPID] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
set _CPUTAPID 0x3f0f0f0f
|
|
}
|
|
|
|
adapter srst delay 200
|
|
jtag_ntrst_delay 200
|
|
|
|
## JTAG scan chain
|
|
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
|
|
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
|
|
|
##
|
|
## Target configuration
|
|
##
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
|
|
|
|
# allocate the entire SRAM as working area
|
|
$_TARGETNAME configure -work-area-phys 0x10000 -work-area-size 0x2000
|
|
|
|
## flash configuration
|
|
# only target number is needed
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME aduc702x 0 0 0 0 $_TARGETNAME
|
|
|
|
## If you use the watchdog, the following code makes sure that the board
|
|
## doesn't reboot when halted via JTAG. Yes, on the older generation
|
|
## AdUC702x, timer3 continues running even when the CPU is halted.
|
|
|
|
proc watchdog_service {} {
|
|
global watchdog_hdl
|
|
mww 0xffff036c 0
|
|
# echo "watchdog!!"
|
|
set watchdog_hdl [after 500 watchdog_service]
|
|
}
|
|
|
|
$_TARGETNAME configure -event reset-halt-post { watchdog_service }
|
|
$_TARGETNAME configure -event resume-start { global watchdog_hdl; after cancel $watchdog_hdl }
|