e6505b0489
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/ target| while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: I7b2610300b24cccd07bfa6fb5f1266970d5d3a1b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7027
Tested-by: jenkins
31 lines
1.2 KiB
INI
31 lines
1.2 KiB
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
# Maxim Integrated MAX32620 OpenOCD target configuration file
|
|
# www.maximintegrated.com
|
|
|
|
# adapter speed
|
|
adapter speed 4000
|
|
|
|
# reset pin configuration
|
|
reset_config srst_only
|
|
|
|
if {[using_jtag]} {
|
|
jtag newtap max32620 cpu -irlen 4 -irmask 0xf -expected-id 0x4ba00477 -ignore-version
|
|
jtag newtap maxtest tap -irlen 4 -irmask 0xf -ircapture 0x1 -ignore-version
|
|
} else {
|
|
swd newdap max32620 cpu -irlen 4 -irmask 0xf -expected-id 0x2ba01477 -ignore-version
|
|
}
|
|
|
|
# target configuration
|
|
target create max32620.cpu cortex_m -chain-position max32620.cpu
|
|
max32620.cpu configure -work-area-phys 0x20005000 -work-area-size 0x2000
|
|
|
|
# Config Command: flash bank name driver base size chip_width bus_width target [driver_options]
|
|
# flash bank <name> max32xxx <base> <size> 0 0 <target> <flc base> <sector> <clk> <burst>
|
|
# max32620 flash base address 0x00000000
|
|
# max32620 flash size 0x200000 (2MB)
|
|
# max32620 FLC base address 0x40002000
|
|
# max32620 sector (page) size 0x2000 (8kB)
|
|
# max32620 clock speed 96 (MHz)
|
|
flash bank max32620.flash max32xxx 0x00000000 0x200000 0 0 max32620.cpu 0x40002000 0x2000 96
|