Paul Fertser 64d02ccf82 jtag/drivers/ftdi: declare standard JTAG signals on SWD init ... Unfortunately, this means they're available for config files only after selecting swd transport. Change-Id: Ia2afc1f3bfdba8d81efbb8ab964b174c0f7e2811 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2182 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>		2014-06-28 09:36:17 +00:00
..
flash	flash: samd: add SAMD10 and SAMD11 part IDs	2014-06-22 08:47:49 +00:00
helper	swd: Improve parity calculation and move it to types.h	2014-06-28 09:27:19 +00:00
jtag	jtag/drivers/ftdi: declare standard JTAG signals on SWD init	2014-06-28 09:36:17 +00:00
pld	update files to correct FSF address	2013-06-05 19:52:42 +00:00
rtos	Don't cast return value of [cm]alloc	2014-03-30 03:53:45 +00:00
server	openrisc: add support for JTAG Serial Port	2014-06-22 08:39:08 +00:00
svf	svf: Only read TDO back from the device if we actually need to look at the bits.	2014-06-22 08:32:13 +00:00
target	Relax polling check if not in JTAG mode	2014-06-28 09:34:55 +00:00
transport	transport: Constify the transports vector	2014-06-28 09:33:31 +00:00
xsvf	update files to correct FSF address	2013-06-05 19:52:42 +00:00
hello.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
hello.h	update files to correct FSF address	2013-06-05 19:52:42 +00:00
main.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
Makefile.am	Makefile.am: fix build for libftdi1, pass CFLAGS where appropriate	2014-04-14 18:09:40 +00:00
openocd.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
openocd.h	update files to correct FSF address	2013-06-05 19:52:42 +00:00