1c021ed0af
Remove this underutilized feature. Despite the fact that a lot of configs specifies a arbitrary "variant", only the xscale target actually defines any. In the case of xscale, the use of -variant is dubious since 1) it's used as a redundant irlen specifier, 2) it carries a comment that it doesn't really need it and 3) only two xscale configs even specify it. If there's a future target that needs a variant set, a target specific option could be added when needed. Change-Id: I1ba25a946f0d80872cbd96ddcc48f92695c4ae20 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2283 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
37 lines
963 B
INI
37 lines
963 B
INI
#daemon configuration
|
|
telnet_port 4444
|
|
gdb_port 3333
|
|
|
|
# tell gdb our flash memory map
|
|
# and enable flash programming
|
|
gdb_memory_map enable
|
|
gdb_flash_program enable
|
|
|
|
#interface
|
|
interface ft2232
|
|
ft2232_device_desc "Amontec JTAGkey A"
|
|
ft2232_layout jtagkey
|
|
ft2232_vid_pid 0x0403 0xcff8
|
|
jtag_speed 0
|
|
|
|
#use combined on interfaces or targets that can't set TRST/SRST separately
|
|
reset_config trst_and_srst srst_pulls_trst
|
|
|
|
#jtag scan chain
|
|
jtag newtap str7 cpu -irlen 4 -irmask 0xf
|
|
|
|
#target configuration
|
|
target create target0 arm7tdmi -endian little -chain-position 0
|
|
[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false
|
|
|
|
target_script 0 gdb_program_config .\prj\str710_program.script
|
|
|
|
#flash bank str7x <base> <size> 0 0 <target#> <variant>
|
|
flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x
|
|
|
|
# For more information about the configuration files,
|
|
# look at the OpenOCD User's Guide.
|
|
|
|
init
|
|
reset halt
|