149 lines
4.9 KiB
C
149 lines
4.9 KiB
C
/* To be built with arm-none-eabi-gcc -c -mthumb -mcpu=cortex-m0 -O3 bluenrgx.c */
|
|
/* Then postprocess output of command "arm-none-eabi-objdump -d bluenrgx.o" to make a C array of bytes */
|
|
|
|
#include <stdint.h>
|
|
|
|
/* Status Values ----------------------------------------------------------*/
|
|
#define SUCCESS 0
|
|
#define ERR_UNALIGNED 1
|
|
#define ERR_INVALID_ADDRESS 2
|
|
#define ERR_INVALID_TYPE 3
|
|
#define ERR_WRITE_PROTECTED 4
|
|
#define ERR_WRITE_FAILED 5
|
|
#define ERR_ERASE_REQUIRED 6
|
|
#define ERR_VERIFY_FAILED 7
|
|
|
|
/* Flash Controller defines ---------------------------------------------------*/
|
|
#ifdef BLUENRG_LP
|
|
#define FLASH_REG_COMMAND ((volatile uint32_t *)0x40001000)
|
|
#define FLASH_REG_CONFIG ((volatile uint32_t *)0x40001004)
|
|
#define FLASH_REG_IRQSTAT ((volatile uint32_t *)0x40001008)
|
|
#define FLASH_REG_IRQMASK ((volatile uint32_t *)0x4000100C)
|
|
#define FLASH_REG_IRQRAW ((volatile uint32_t *)0x40001010)
|
|
#define FLASH_REG_ADDRESS ((volatile uint32_t *)0x40001018)
|
|
#define FLASH_REG_UNLOCKM ((volatile uint32_t *)0x4000101C)
|
|
#define FLASH_REG_UNLOCKL ((volatile uint32_t *)0x40001020)
|
|
#define FLASH_REG_DATA0 ((volatile uint32_t *)0x40001040)
|
|
#define FLASH_REG_DATA1 ((volatile uint32_t *)0x40001044)
|
|
#define FLASH_REG_DATA2 ((volatile uint32_t *)0x40001048)
|
|
#define FLASH_REG_DATA3 ((volatile uint32_t *)0x4000104C)
|
|
#define FLASH_SIZE_REG 0x40001014
|
|
#else
|
|
#define FLASH_REG_COMMAND ((volatile uint32_t *)0x40100000)
|
|
#define FLASH_REG_CONFIG ((volatile uint32_t *)0x40100004)
|
|
#define FLASH_REG_IRQSTAT ((volatile uint32_t *)0x40100008)
|
|
#define FLASH_REG_IRQMASK ((volatile uint32_t *)0x4010000C)
|
|
#define FLASH_REG_IRQRAW ((volatile uint32_t *)0x40100010)
|
|
#define FLASH_REG_ADDRESS ((volatile uint32_t *)0x40100018)
|
|
#define FLASH_REG_UNLOCKM ((volatile uint32_t *)0x4010001C)
|
|
#define FLASH_REG_UNLOCKL ((volatile uint32_t *)0x40100020)
|
|
#define FLASH_REG_DATA0 ((volatile uint32_t *)0x40100040)
|
|
#define FLASH_REG_DATA1 ((volatile uint32_t *)0x40100044)
|
|
#define FLASH_REG_DATA2 ((volatile uint32_t *)0x40100048)
|
|
#define FLASH_REG_DATA3 ((volatile uint32_t *)0x4010004C)
|
|
#define FLASH_SIZE_REG 0x40100014
|
|
#endif
|
|
|
|
#define MFB_MASS_ERASE 0x01
|
|
#define MFB_PAGE_ERASE 0x02
|
|
|
|
#define DO_ERASE 0x0100
|
|
#define DO_VERIFY 0x0200
|
|
#define FLASH_CMD_ERASE_PAGE 0x11
|
|
#define FLASH_CMD_MASSERASE 0x22
|
|
#define FLASH_CMD_WRITE 0x33
|
|
#define FLASH_CMD_BURSTWRITE 0xCC
|
|
#define FLASH_INT_CMDDONE 0x01
|
|
#define MFB_BOTTOM (0x10040000)
|
|
#define MFB_SIZE_B ((16 * (((*(uint32_t *) FLASH_SIZE_REG) + 1) >> 12)) * 1024)
|
|
#define MFB_SIZE_W (MFB_SIZE_B/4)
|
|
#define MFB_TOP (MFB_BOTTOM+MFB_SIZE_B-1)
|
|
#define MFB_PAGE_SIZE_B (2048)
|
|
#define MFB_PAGE_SIZE_W (MFB_PAGE_SIZE_B/4)
|
|
|
|
#define AREA_ERROR 0x01
|
|
#define AREA_MFB 0x04
|
|
|
|
#define FLASH_WORD_LEN 4
|
|
|
|
typedef struct {
|
|
volatile uint8_t *wp;
|
|
uint8_t *rp;
|
|
} work_area_t;
|
|
|
|
/* Flash Commands --------------------------------------------------------*/
|
|
static inline __attribute__((always_inline)) uint32_t flashWrite(uint32_t address, uint8_t **data,
|
|
uint32_t writeLength)
|
|
{
|
|
uint32_t index, flash_word[4];
|
|
uint8_t i;
|
|
|
|
*FLASH_REG_IRQMASK = 0;
|
|
for (index = 0; index < writeLength; index += (FLASH_WORD_LEN*4)) {
|
|
for (i = 0; i < 4; i++)
|
|
flash_word[i] = (*(uint32_t *) (*data + i*4));
|
|
|
|
/* Clear the IRQ flags */
|
|
*FLASH_REG_IRQRAW = 0x0000003F;
|
|
/* Load the flash address to write */
|
|
*FLASH_REG_ADDRESS = (uint16_t)((address + index - MFB_BOTTOM) >> 2);
|
|
/* Prepare and load the data to flash */
|
|
*FLASH_REG_DATA0 = flash_word[0];
|
|
*FLASH_REG_DATA1 = flash_word[1];
|
|
*FLASH_REG_DATA2 = flash_word[2];
|
|
*FLASH_REG_DATA3 = flash_word[3];
|
|
/* Flash write command */
|
|
*FLASH_REG_COMMAND = FLASH_CMD_BURSTWRITE;
|
|
/* Wait the end of the flash write command */
|
|
while ((*FLASH_REG_IRQRAW & FLASH_INT_CMDDONE) == 0)
|
|
;
|
|
*data += (FLASH_WORD_LEN * 4);
|
|
}
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
__attribute__((naked)) __attribute__((noreturn)) void write(uint8_t *work_area_p,
|
|
uint8_t *fifo_end,
|
|
uint8_t *target_address,
|
|
uint32_t count)
|
|
{
|
|
uint32_t retval;
|
|
volatile work_area_t *work_area = (work_area_t *) work_area_p;
|
|
uint8_t *fifo_start = (uint8_t *) work_area->rp;
|
|
|
|
while (count) {
|
|
volatile int32_t fifo_linear_size;
|
|
|
|
/* Wait for some data in the FIFO */
|
|
while (work_area->rp == work_area->wp)
|
|
;
|
|
if (work_area->wp == 0) {
|
|
/* Aborted by other party */
|
|
break;
|
|
}
|
|
if (work_area->rp > work_area->wp) {
|
|
fifo_linear_size = fifo_end-work_area->rp;
|
|
} else {
|
|
fifo_linear_size = (work_area->wp - work_area->rp);
|
|
if (fifo_linear_size < 0)
|
|
fifo_linear_size = 0;
|
|
}
|
|
if (fifo_linear_size < 16) {
|
|
/* We should never get here */
|
|
continue;
|
|
}
|
|
|
|
retval = flashWrite((uint32_t) target_address, (uint8_t **) &work_area->rp, fifo_linear_size);
|
|
if (retval != SUCCESS) {
|
|
work_area->rp = (uint8_t *)retval;
|
|
break;
|
|
}
|
|
target_address += fifo_linear_size;
|
|
if (work_area->rp >= fifo_end)
|
|
work_area->rp = fifo_start;
|
|
count -= fifo_linear_size;
|
|
}
|
|
__asm("bkpt 0");
|
|
}
|