2231da8ec4
- add 'dap create' command to create dap instances - move all dap subcmmand into the dap instance commands - keep 'dap info' for convenience - change all armv7 and armv8 targets to take a dap instance instead of a jtag chain position - restructure tap/dap/target relations, jtag tap no longer references the dap, daps are now independently created and initialized. - clean up swd connect - re-initialize DAP also on JTAG errors (e.g. after reset, power cycle) - update documentation - update target files Change-Id: I322cf3969b5407c25d1d3962f9d9b9bc1df067d9 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4468 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
53 lines
1.3 KiB
INI
53 lines
1.3 KiB
INI
# ATMEL SAMV, SAMS, and SAME chips are Cortex-M7 parts
|
|
# The chips are very similar; the SAMV series just has
|
|
# more peripherals and seems like the "flagship" of the
|
|
# family. This script will work for all of them.
|
|
|
|
source [find target/swj-dp.tcl]
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME samv
|
|
}
|
|
|
|
if { [info exists ENDIAN] } {
|
|
set _ENDIAN $ENDIAN
|
|
} else {
|
|
set _ENDIAN little
|
|
}
|
|
|
|
# Work-area is a space in RAM used for flash programming
|
|
# By default use 16kB
|
|
if { [info exists WORKAREASIZE] } {
|
|
set _WORKAREASIZE $WORKAREASIZE
|
|
} else {
|
|
set _WORKAREASIZE 0x4000
|
|
}
|
|
|
|
if { [info exists CPUTAPID] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
set _CPUTAPID 0x0bd11477
|
|
}
|
|
|
|
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
|
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
|
|
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
|
|
|
|
$_TARGETNAME configure -work-area-phys 0x20400000 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
|
|
|
adapter_khz 1800
|
|
|
|
if {![using_hla]} {
|
|
# if srst is not fitted use SYSRESETREQ to
|
|
# perform a soft reset
|
|
cortex_m reset_config sysresetreq
|
|
}
|
|
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME atsamv 0x00400000 0 0 0 $_TARGETNAME
|
|
|