- add 'dap create' command to create dap instances - move all dap subcmmand into the dap instance commands - keep 'dap info' for convenience - change all armv7 and armv8 targets to take a dap instance instead of a jtag chain position - restructure tap/dap/target relations, jtag tap no longer references the dap, daps are now independently created and initialized. - clean up swd connect - re-initialize DAP also on JTAG errors (e.g. after reset, power cycle) - update documentation - update target files Change-Id: I322cf3969b5407c25d1d3962f9d9b9bc1df067d9 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4468 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
54 lines
1.0 KiB
INI
54 lines
1.0 KiB
INI
#
|
|
# Texas Instruments MSP432P4xx - ARM Cortex-M4F @ up to 48 MHz
|
|
#
|
|
# http://www.ti.com/MSP432
|
|
#
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME msp432p4xx
|
|
}
|
|
|
|
if { [info exists CPUTAPID] } {
|
|
set _DAP_TAPID $CPUTAPID
|
|
} else {
|
|
set _DAP_TAPID 0x4ba00477
|
|
}
|
|
|
|
if { [info exists DAP_SWD_ID] } {
|
|
set _DAP_SWD_ID $DAP_SWD_ID
|
|
} else {
|
|
set _DAP_SWD_ID 0x2ba01477
|
|
}
|
|
|
|
source [find target/swj-dp.tcl]
|
|
|
|
if { [using_jtag] } {
|
|
set _DAP_ID $_DAP_TAPID
|
|
} else {
|
|
set _DAP_ID $_DAP_SWD_ID
|
|
}
|
|
|
|
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_DAP_ID
|
|
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
|
|
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
|
|
|
|
if { [info exists WORKAREASIZE] } {
|
|
set _WORKAREASIZE $WORKAREASIZE
|
|
} else {
|
|
# On MSP432P401x Bank0 (8k) is always powered
|
|
set _WORKAREASIZE 0x2000
|
|
}
|
|
|
|
$_TARGETNAME configure -work-area-phys 0x20000000 \
|
|
-work-area-size $_WORKAREASIZE -work-area-backup 0
|
|
|
|
if { ![using_hla] } {
|
|
cortex_m reset_config sysresetreq
|
|
}
|
|
|
|
adapter_khz 500
|