imi415
/
openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
openocd/src/flash/nor/stm32f1x.c

1701 lines
44 KiB
C
Raw Blame History

/***************************************************************************
* Copyright (C) 2005 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
* Copyright (C) 2008 by Spencer Oliver *
* spen@spen-soft.co.uk *
* *
* Copyright (C) 2011 by Andreas Fritiofson *
* andreas.fritiofson@gmail.com *
*
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "imp.h"
#include <helper/binarybuffer.h>
#include <target/algorithm.h>
#include <target/armv7m.h>
/* stm32x register locations */
#define FLASH_REG_BASE_B0 0x40022000
#define FLASH_REG_BASE_B1 0x40022040
#define STM32_FLASH_ACR 0x00
#define STM32_FLASH_KEYR 0x04
#define STM32_FLASH_OPTKEYR 0x08
#define STM32_FLASH_SR 0x0C
#define STM32_FLASH_CR 0x10
#define STM32_FLASH_AR 0x14
#define STM32_FLASH_OBR 0x1C
#define STM32_FLASH_WRPR 0x20
/* TODO: Check if code using these really should be hard coded to bank 0.
* There are valid cases, on dual flash devices the protection of the
* second bank is done on the bank0 reg's. */
#define STM32_FLASH_ACR_B0 0x40022000
#define STM32_FLASH_KEYR_B0 0x40022004
#define STM32_FLASH_OPTKEYR_B0 0x40022008
#define STM32_FLASH_SR_B0 0x4002200C
#define STM32_FLASH_CR_B0 0x40022010
#define STM32_FLASH_AR_B0 0x40022014
#define STM32_FLASH_OBR_B0 0x4002201C
#define STM32_FLASH_WRPR_B0 0x40022020
/* option byte location */
#define STM32_OB_RDP 0x1FFFF800
#define STM32_OB_USER 0x1FFFF802
#define STM32_OB_DATA0 0x1FFFF804
#define STM32_OB_DATA1 0x1FFFF806
#define STM32_OB_WRP0 0x1FFFF808
#define STM32_OB_WRP1 0x1FFFF80A
#define STM32_OB_WRP2 0x1FFFF80C
#define STM32_OB_WRP3 0x1FFFF80E
/* FLASH_CR register bits */
#define FLASH_PG (1 << 0)
#define FLASH_PER (1 << 1)
#define FLASH_MER (1 << 2)
#define FLASH_OPTPG (1 << 4)
#define FLASH_OPTER (1 << 5)
#define FLASH_STRT (1 << 6)
#define FLASH_LOCK (1 << 7)
#define FLASH_OPTWRE (1 << 9)
/* FLASH_SR register bits */
#define FLASH_BSY (1 << 0)
#define FLASH_PGERR (1 << 2)
#define FLASH_WRPRTERR (1 << 4)
#define FLASH_EOP (1 << 5)
/* STM32_FLASH_OBR bit definitions (reading) */
#define OPT_ERROR 0
#define OPT_READOUT 1
#define OPT_RDWDGSW 2
#define OPT_RDRSTSTOP 3
#define OPT_RDRSTSTDBY 4
#define OPT_BFB2 5 /* dual flash bank only */
/* register unlock keys */
#define KEY1 0x45670123
#define KEY2 0xCDEF89AB
struct stm32x_options
{
uint16_t RDP;
uint16_t user_options;
uint16_t protection[4];
};
struct stm32x_flash_bank
{
struct stm32x_options option_bytes;
struct working_area *write_algorithm;
int ppage_size;
int probed;
bool has_dual_banks;
/* used to access dual flash bank stm32xl */
uint32_t register_base;
};
static int stm32x_mass_erase(struct flash_bank *bank);
/* flash bank stm32x <base> <size> 0 0 <target#>
*/
FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command)
{
struct stm32x_flash_bank *stm32x_info;
if (CMD_ARGC < 6)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
stm32x_info = malloc(sizeof(struct stm32x_flash_bank));
bank->driver_priv = stm32x_info;
stm32x_info->write_algorithm = NULL;
stm32x_info->probed = 0;
stm32x_info->has_dual_banks = false;
stm32x_info->register_base = FLASH_REG_BASE_B0;
return ERROR_OK;
}
static inline int stm32x_get_flash_reg(struct flash_bank *bank, uint32_t reg)
{
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
return reg + stm32x_info->register_base;
}
static inline int stm32x_get_flash_status(struct flash_bank *bank, uint32_t *status)
{
struct target *target = bank->target;
return target_read_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR), status);
}
static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout)
{
struct target *target = bank->target;
uint32_t status;
int retval = ERROR_OK;
/* wait for busy to clear */
for (;;)
{
retval = stm32x_get_flash_status(bank, &status);
if (retval != ERROR_OK)
return retval;
LOG_DEBUG("status: 0x%" PRIx32 "", status);
if ((status & FLASH_BSY) == 0)
break;
if (timeout-- <= 0)
{
LOG_ERROR("timed out waiting for flash");
return ERROR_FAIL;
}
alive_sleep(1);
}
if (status & FLASH_WRPRTERR)
{
LOG_ERROR("stm32x device protected");
retval = ERROR_FAIL;
}
if (status & FLASH_PGERR)
{
LOG_ERROR("stm32x device programming failed");
retval = ERROR_FAIL;
}
/* Clear but report errors */
if (status & (FLASH_WRPRTERR | FLASH_PGERR))
{
/* If this operation fails, we ignore it and report the original
* retval
*/
target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR),
FLASH_WRPRTERR | FLASH_PGERR);
}
return retval;
}
int stm32x_check_operation_supported(struct flash_bank *bank)
{
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
/* if we have a dual flash bank device then
* we need to perform option byte stuff on bank0 only */
if (stm32x_info->register_base != FLASH_REG_BASE_B0)
{
LOG_ERROR("Option Byte Operation's must use bank0");
return ERROR_FLASH_OPERATION_FAILED;
}
return ERROR_OK;
}
static int stm32x_read_options(struct flash_bank *bank)
{
uint32_t optiondata;
struct stm32x_flash_bank *stm32x_info = NULL;
struct target *target = bank->target;
stm32x_info = bank->driver_priv;
/* read current option bytes */
int retval = target_read_u32(target, STM32_FLASH_OBR_B0, &optiondata);
if (retval != ERROR_OK)
return retval;
stm32x_info->option_bytes.user_options = (uint16_t)0xFFF8 | ((optiondata >> 2) & 0x07);
stm32x_info->option_bytes.RDP = (optiondata & (1 << OPT_READOUT)) ? 0xFFFF : 0x5AA5;
if (optiondata & (1 << OPT_READOUT))
LOG_INFO("Device Security Bit Set");
/* each bit refers to a 4bank protection */
retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &optiondata);
if (retval != ERROR_OK)
return retval;
stm32x_info->option_bytes.protection[0] = (uint16_t)optiondata;
stm32x_info->option_bytes.protection[1] = (uint16_t)(optiondata >> 8);
stm32x_info->option_bytes.protection[2] = (uint16_t)(optiondata >> 16);
stm32x_info->option_bytes.protection[3] = (uint16_t)(optiondata >> 24);
return ERROR_OK;
}
static int stm32x_erase_options(struct flash_bank *bank)
{
struct stm32x_flash_bank *stm32x_info = NULL;
struct target *target = bank->target;
stm32x_info = bank->driver_priv;
/* read current options */
stm32x_read_options(bank);
/* unlock flash registers */
int retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY1);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY2);
if (retval != ERROR_OK)
return retval;
/* unlock option flash registers */
retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY1);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY2);
if (retval != ERROR_OK)
return retval;
/* erase option bytes */
retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_OPTER | FLASH_OPTWRE);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_OPTER | FLASH_STRT | FLASH_OPTWRE);
if (retval != ERROR_OK)
return retval;
retval = stm32x_wait_status_busy(bank, 10);
if (retval != ERROR_OK)
return retval;
/* clear readout protection and complementary option bytes
* this will also force a device unlock if set */
stm32x_info->option_bytes.RDP = 0x5AA5;
return ERROR_OK;
}
static int stm32x_write_options(struct flash_bank *bank)
{
struct stm32x_flash_bank *stm32x_info = NULL;
struct target *target = bank->target;
stm32x_info = bank->driver_priv;
/* unlock flash registers */
int retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY1);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY2);
if (retval != ERROR_OK)
return retval;
/* unlock option flash registers */
retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY1);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY2);
if (retval != ERROR_OK)
return retval;
/* program option bytes */
retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_OPTPG | FLASH_OPTWRE);
if (retval != ERROR_OK)
return retval;
/* write user option byte */
retval = target_write_u16(target, STM32_OB_USER, stm32x_info->option_bytes.user_options);
if (retval != ERROR_OK)
return retval;
retval = stm32x_wait_status_busy(bank, 10);
if (retval != ERROR_OK)
return retval;
/* write protection byte 1 */
retval = target_write_u16(target, STM32_OB_WRP0, stm32x_info->option_bytes.protection[0]);
if (retval != ERROR_OK)
return retval;
retval = stm32x_wait_status_busy(bank, 10);
if (retval != ERROR_OK)
return retval;
/* write protection byte 2 */
retval = target_write_u16(target, STM32_OB_WRP1, stm32x_info->option_bytes.protection[1]);
if (retval != ERROR_OK)
return retval;
retval = stm32x_wait_status_busy(bank, 10);
if (retval != ERROR_OK)
return retval;
/* write protection byte 3 */
retval = target_write_u16(target, STM32_OB_WRP2, stm32x_info->option_bytes.protection[2]);
if (retval != ERROR_OK)
return retval;
retval = stm32x_wait_status_busy(bank, 10);
if (retval != ERROR_OK)
return retval;
/* write protection byte 4 */
retval = target_write_u16(target, STM32_OB_WRP3, stm32x_info->option_bytes.protection[3]);
if (retval != ERROR_OK)
return retval;
retval = stm32x_wait_status_busy(bank, 10);
if (retval != ERROR_OK)
return retval;
/* write readout protection bit */
retval = target_write_u16(target, STM32_OB_RDP, stm32x_info->option_bytes.RDP);
if (retval != ERROR_OK)
return retval;
retval = stm32x_wait_status_busy(bank, 10);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_LOCK);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
static int stm32x_protect_check(struct flash_bank *bank)
{
struct target *target = bank->target;
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
uint32_t protection;
int i, s;
int num_bits;
int set;
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
int retval = stm32x_check_operation_supported(bank);
if (ERROR_OK != retval)
return retval;
/* medium density - each bit refers to a 4bank protection
* high density - each bit refers to a 2bank protection */
retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &protection);
if (retval != ERROR_OK)
return retval;
/* medium density - each protection bit is for 4 * 1K pages
* high density - each protection bit is for 2 * 2K pages */
num_bits = (bank->num_sectors / stm32x_info->ppage_size);
if (stm32x_info->ppage_size == 2)
{
/* high density flash/connectivity line protection */
set = 1;
if (protection & (1 << 31))
set = 0;
/* bit 31 controls sector 62 - 255 protection for high density
* bit 31 controls sector 62 - 127 protection for connectivity line */
for (s = 62; s < bank->num_sectors; s++)
{
bank->sectors[s].is_protected = set;
}
if (bank->num_sectors > 61)
num_bits = 31;
for (i = 0; i < num_bits; i++)
{
set = 1;
if (protection & (1 << i))
set = 0;
for (s = 0; s < stm32x_info->ppage_size; s++)
bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
}
}
else
{
/* low/medium density flash protection */
for (i = 0; i < num_bits; i++)
{
set = 1;
if (protection & (1 << i))
set = 0;
for (s = 0; s < stm32x_info->ppage_size; s++)
bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
}
}
return ERROR_OK;
}
static int stm32x_erase(struct flash_bank *bank, int first, int last)
{
struct target *target = bank->target;
int i;
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if ((first == 0) && (last == (bank->num_sectors - 1)))
{
return stm32x_mass_erase(bank);
}
/* unlock flash registers */
int retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
if (retval != ERROR_OK)
return retval;
for (i = first; i <= last; i++)
{
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PER);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_AR),
bank->base + bank->sectors[i].offset);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target,
stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PER | FLASH_STRT);
if (retval != ERROR_OK)
return retval;
retval = stm32x_wait_status_busy(bank, 100);
if (retval != ERROR_OK)
return retval;
bank->sectors[i].is_erased = 1;
}
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
static int stm32x_protect(struct flash_bank *bank, int set, int first, int last)
{
struct stm32x_flash_bank *stm32x_info = NULL;
struct target *target = bank->target;
uint16_t prot_reg[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
int i, reg, bit;
int status;
uint32_t protection;
stm32x_info = bank->driver_priv;
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
int retval = stm32x_check_operation_supported(bank);
if (ERROR_OK != retval)
return retval;
if ((first % stm32x_info->ppage_size) != 0)
{
LOG_WARNING("aligned start protect sector to a %d sector boundary",
stm32x_info->ppage_size);
first = first - (first % stm32x_info->ppage_size);
}
if (((last + 1) % stm32x_info->ppage_size) != 0)
{
LOG_WARNING("aligned end protect sector to a %d sector boundary",
stm32x_info->ppage_size);
last++;
last = last - (last % stm32x_info->ppage_size);
last--;
}
/* medium density - each bit refers to a 4bank protection
* high density - each bit refers to a 2bank protection */
retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &protection);
if (retval != ERROR_OK)
return retval;
prot_reg[0] = (uint16_t)protection;
prot_reg[1] = (uint16_t)(protection >> 8);
prot_reg[2] = (uint16_t)(protection >> 16);
prot_reg[3] = (uint16_t)(protection >> 24);
if (stm32x_info->ppage_size == 2)
{
/* high density flash */
/* bit 7 controls sector 62 - 255 protection */
if (last > 61)
{
if (set)
prot_reg[3] &= ~(1 << 7);
else
prot_reg[3] |= (1 << 7);
}
if (first > 61)
first = 62;
if (last > 61)
last = 61;
for (i = first; i <= last; i++)
{
reg = (i / stm32x_info->ppage_size) / 8;
bit = (i / stm32x_info->ppage_size) - (reg * 8);
if (set)
prot_reg[reg] &= ~(1 << bit);
else
prot_reg[reg] |= (1 << bit);
}
}
else
{
/* medium density flash */
for (i = first; i <= last; i++)
{
reg = (i / stm32x_info->ppage_size) / 8;
bit = (i / stm32x_info->ppage_size) - (reg * 8);
if (set)
prot_reg[reg] &= ~(1 << bit);
else
prot_reg[reg] |= (1 << bit);
}
}
if ((status = stm32x_erase_options(bank)) != ERROR_OK)
return status;
stm32x_info->option_bytes.protection[0] = prot_reg[0];
stm32x_info->option_bytes.protection[1] = prot_reg[1];
stm32x_info->option_bytes.protection[2] = prot_reg[2];
stm32x_info->option_bytes.protection[3] = prot_reg[3];
return stm32x_write_options(bank);
}
static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
struct target *target = bank->target;
uint32_t buffer_size = 16384;
struct working_area *source;
uint32_t address = bank->base + offset;
struct reg_param reg_params[5];
struct armv7m_algorithm armv7m_info;
int retval = ERROR_OK;
/* see contrib/loaders/flash/stm32f1x.S for src */
static const uint8_t stm32x_flash_write_code[] = {
/* #define STM32_FLASH_CR_OFFSET 0x10 */
/* #define STM32_FLASH_SR_OFFSET 0x0C */
/* wait_fifo: */
0x16, 0x68, /* ldr r6, [r2, #0] */
0x00, 0x2e, /* cmp r6, #0 */
0x1a, 0xd0, /* beq exit */
0x55, 0x68, /* ldr r5, [r2, #4] */
0xb5, 0x42, /* cmp r5, r6 */
0xf9, 0xd0, /* beq wait_fifo */
0x01, 0x26, /* movs r6, #1 */
0x06, 0x61, /* str r6, [r0, #STM32_FLASH_CR_OFFSET] */
0x2e, 0x88, /* ldrh r6, [r5, #0] */
0x26, 0x80, /* strh r6, [r4, #0] */
0x02, 0x35, /* adds r5, #2 */
0x02, 0x34, /* adds r4, #2 */
/* busy: */
0xc6, 0x68, /* ldr r6, [r0, #STM32_FLASH_SR_OFFSET] */
0x01, 0x27, /* movs r7, #1 */
0x3e, 0x42, /* tst r6, r7 */
0xfb, 0xd1, /* bne busy */
0x14, 0x27, /* movs r7, #0x14 */
0x3e, 0x42, /* tst r6, r7 */
0x08, 0xd1, /* bne error */
0x9d, 0x42, /* cmp r5, r3 */
0x01, 0xd3, /* bcc no_wrap */
0x15, 0x46, /* mov r5, r2 */
0x08, 0x35, /* adds r5, #8 */
/* no_wrap: */
0x55, 0x60, /* str r5, [r2, #4] */
0x01, 0x39, /* subs r1, r1, #1 */
0x00, 0x29, /* cmp r1, #0 */
0x02, 0xd0, /* beq exit */
0xe3, 0xe7, /* b wait_fifo */
/* error: */
0x00, 0x20, /* movs r0, #0 */
0x50, 0x60, /* str r0, [r2, #4] */
/* exit: */
0x30, 0x46, /* mov r0, r6 */
0x00, 0xbe, /* bkpt #0 */
};
/* flash write code */
if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code),
&stm32x_info->write_algorithm) != ERROR_OK)
{
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
if ((retval = target_write_buffer(target, stm32x_info->write_algorithm->address,
sizeof(stm32x_flash_write_code),
(uint8_t*)stm32x_flash_write_code)) != ERROR_OK)
return retval;
/* memory buffer */
while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK)
{
buffer_size /= 2;
buffer_size &= ~3UL; // Make sure it's 4 byte aligned
if (buffer_size <= 256)
{
/* if we already allocated the writing code, but failed to get a
* buffer, free the algorithm */
if (stm32x_info->write_algorithm)
target_free_working_area(target, stm32x_info->write_algorithm);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
};
/* Set up working area. First word is write pointer, second word is read pointer,
* rest is fifo data area. */
uint32_t wp_addr = source->address;
uint32_t rp_addr = source->address + 4;
uint32_t fifo_start_addr = source->address + 8;
uint32_t fifo_end_addr = source->address + source->size;
uint32_t wp = fifo_start_addr;
uint32_t rp = fifo_start_addr;
retval = target_write_u32(target, wp_addr, wp);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, rp_addr, rp);
if (retval != ERROR_OK)
return retval;
init_reg_param(&reg_params[0], "r0", 32, PARAM_IN_OUT); /* flash base (in), status (out) */
init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT); /* count (halfword-16bit) */
init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT); /* buffer start */
init_reg_param(&reg_params[3], "r3", 32, PARAM_OUT); /* buffer end */
init_reg_param(&reg_params[4], "r4", 32, PARAM_IN_OUT); /* target address */
buf_set_u32(reg_params[0].value, 0, 32, stm32x_info->register_base);
buf_set_u32(reg_params[1].value, 0, 32, count);
buf_set_u32(reg_params[2].value, 0, 32, source->address);
buf_set_u32(reg_params[3].value, 0, 32, source->address + source->size);
buf_set_u32(reg_params[4].value, 0, 32, address);
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARMV7M_MODE_ANY;
/* Start up algorithm on target and let it idle while writing the first chunk */
if ((retval = target_start_algorithm(target, 0, NULL, 5, reg_params,
stm32x_info->write_algorithm->address,
0,
&armv7m_info)) != ERROR_OK)
{
LOG_ERROR("error starting stm32x flash write algorithm");
goto cleanup;
}
while (count > 0)
{
retval = target_read_u32(target, rp_addr, &rp);
if (retval != ERROR_OK)
{
LOG_ERROR("failed to get read pointer");
break;
}
LOG_DEBUG("count 0x%"PRIx32" wp 0x%"PRIx32" rp 0x%"PRIx32, count, wp, rp);
if (rp == 0)
{
LOG_ERROR("flash write algorithm aborted by target");
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
if ((rp & 1) || rp < fifo_start_addr || rp >= fifo_end_addr)
{
LOG_ERROR("corrupted fifo read pointer 0x%"PRIx32, rp);
break;
}
/* Count the number of bytes available in the fifo without
* crossing the wrap around. Make sure to not fill it completely,
* because that would make wp == rp and that's the empty condition. */
uint32_t thisrun_bytes;
if (rp > wp)
thisrun_bytes = rp - wp - 2;
else if (rp > fifo_start_addr)
thisrun_bytes = fifo_end_addr - wp;
else
thisrun_bytes = fifo_end_addr - wp - 2;
if (thisrun_bytes == 0)
{
/* Throttle polling a bit if transfer is (much) faster than flash
* programming. The exact delay shouldn't matter as long as it's
* less than buffer size / flash speed. This is very unlikely to
* run when using high latency connections such as USB. */
alive_sleep(10);
continue;
}
/* Limit to the amount of data we actually want to write */
if (thisrun_bytes > count * 2)
thisrun_bytes = count * 2;
/* Write data to fifo */
retval = target_write_buffer(target, wp, thisrun_bytes, buffer);
if (retval != ERROR_OK)
break;
/* Update counters and wrap write pointer */
buffer += thisrun_bytes;
count -= thisrun_bytes / 2;
wp += thisrun_bytes;
if (wp >= fifo_end_addr)
wp = fifo_start_addr;
/* Store updated write pointer to target */
retval = target_write_u32(target, wp_addr, wp);
if (retval != ERROR_OK)
break;
}
if (retval != ERROR_OK)
{
/* abort flash write algorithm on target */
target_write_u32(target, wp_addr, 0);
}
int retval2;
if ((retval2 = target_wait_algorithm(target, 0, NULL, 5, reg_params,
0,
10000,
&armv7m_info)) != ERROR_OK)
{
LOG_ERROR("error waiting for stm32x flash write algorithm");
retval = retval2;
}
if (retval == ERROR_FLASH_OPERATION_FAILED)
{
LOG_ERROR("flash write failed at address 0x%"PRIx32,
buf_get_u32(reg_params[4].value, 0, 32));
if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_PGERR)
{
LOG_ERROR("flash memory not erased before writing");
/* Clear but report errors */
target_write_u32(target, STM32_FLASH_SR_B0, FLASH_PGERR);
}
if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_WRPRTERR)
{
LOG_ERROR("flash memory write protected");
/* Clear but report errors */
target_write_u32(target, STM32_FLASH_SR_B0, FLASH_WRPRTERR);
}
}
cleanup:
target_free_working_area(target, source);
target_free_working_area(target, stm32x_info->write_algorithm);
destroy_reg_param(&reg_params[0]);
destroy_reg_param(&reg_params[1]);
destroy_reg_param(&reg_params[2]);
destroy_reg_param(&reg_params[3]);
destroy_reg_param(&reg_params[4]);
return retval;
}
static int stm32x_write(struct flash_bank *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
uint32_t words_remaining = (count / 2);
uint32_t bytes_remaining = (count & 0x00000001);
uint32_t address = bank->base + offset;
uint32_t bytes_written = 0;
int retval;
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (offset & 0x1)
{
LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
/* unlock flash registers */
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
if (retval != ERROR_OK)
return retval;
/* multiple half words (2-byte) to be programmed? */
if (words_remaining > 0)
{
/* try using a block write */
if ((retval = stm32x_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK)
{
if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
{
/* if block write failed (no sufficient working area),
* we use normal (slow) single dword accesses */
LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
}
}
else
{
buffer += words_remaining * 2;
address += words_remaining * 2;
words_remaining = 0;
}
}
if ((retval != ERROR_OK) && (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE))
return retval;
while (words_remaining > 0)
{
uint16_t value;
memcpy(&value, buffer + bytes_written, sizeof(uint16_t));
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PG);
if (retval != ERROR_OK)
return retval;
retval = target_write_u16(target, address, value);
if (retval != ERROR_OK)
return retval;
retval = stm32x_wait_status_busy(bank, 5);
if (retval != ERROR_OK)
return retval;
bytes_written += 2;
words_remaining--;
address += 2;
}
if (bytes_remaining)
{
uint16_t value = 0xffff;
memcpy(&value, buffer + bytes_written, bytes_remaining);
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PG);
if (retval != ERROR_OK)
return retval;
retval = target_write_u16(target, address, value);
if (retval != ERROR_OK)
return retval;
retval = stm32x_wait_status_busy(bank, 5);
if (retval != ERROR_OK)
return retval;
}
return target_write_u32(target, STM32_FLASH_CR_B0, FLASH_LOCK);
}
static int stm32x_probe(struct flash_bank *bank)
{
struct target *target = bank->target;
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
int i;
uint16_t flash_size_in_kb;
uint32_t device_id;
int page_size;
uint32_t base_address = 0x08000000;
stm32x_info->probed = 0;
stm32x_info->register_base = FLASH_REG_BASE_B0;
/* read stm32 device id register */
int retval = target_read_u32(target, 0xE0042000, &device_id);
if (retval != ERROR_OK)
return retval;
LOG_INFO("device id = 0x%08" PRIx32 "", device_id);
/* get flash size from target. */
retval = target_read_u16(target, 0x1FFFF7E0, &flash_size_in_kb);
if (retval != ERROR_OK)
{
LOG_WARNING("failed reading flash size, default to max target family");
/* failed reading flash size, default to max target family */
flash_size_in_kb = 0xffff;
}
if ((device_id & 0xfff) == 0x410) {
/* medium density - we have 1k pages
* 4 pages for a protection area */
page_size = 1024;
stm32x_info->ppage_size = 4;
/* check for early silicon */
if (flash_size_in_kb == 0xffff)
{
/* number of sectors incorrect on revA */
LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash");
flash_size_in_kb = 128;
}
} else if ((device_id & 0xfff) == 0x412) {
/* low density - we have 1k pages
* 4 pages for a protection area */
page_size = 1024;
stm32x_info->ppage_size = 4;
/* check for early silicon */
if (flash_size_in_kb == 0xffff)
{
/* number of sectors incorrect on revA */
LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 32k flash");
flash_size_in_kb = 32;
}
} else if ((device_id & 0xfff) == 0x414) {
/* high density - we have 2k pages
* 2 pages for a protection area */
page_size = 2048;
stm32x_info->ppage_size = 2;
/* check for early silicon */
if (flash_size_in_kb == 0xffff)
{
/* number of sectors incorrect on revZ */
LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 512k flash");
flash_size_in_kb = 512;
}
} else if ((device_id & 0xfff) == 0x418) {
/* connectivity line density - we have 2k pages
* 2 pages for a protection area */
page_size = 2048;
stm32x_info->ppage_size = 2;
/* check for early silicon */
if (flash_size_in_kb == 0xffff)
{
/* number of sectors incorrect on revZ */
LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 256k flash");
flash_size_in_kb = 256;
}
} else if ((device_id & 0xfff) == 0x420) {
/* value line density - we have 1k pages
* 4 pages for a protection area */
page_size = 1024;
stm32x_info->ppage_size = 4;
/* check for early silicon */
if (flash_size_in_kb == 0xffff)
{
/* number of sectors may be incorrrect on early silicon */
LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash");
flash_size_in_kb = 128;
}
} else if ((device_id & 0xfff) == 0x428) {
/* value line High density - we have 2k pages
* 4 pages for a protection area */
page_size = 2048;
stm32x_info->ppage_size = 4;
/* check for early silicon */
if (flash_size_in_kb == 0xffff)
{
/* number of sectors may be incorrrect on early silicon */
LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash");
flash_size_in_kb = 128;
}
} else if ((device_id & 0xfff) == 0x430) {
/* xl line density - we have 2k pages
* 2 pages for a protection area */
page_size = 2048;
stm32x_info->ppage_size = 2;
stm32x_info->has_dual_banks = true;
/* check for early silicon */
if (flash_size_in_kb == 0xffff)
{
/* number of sectors may be incorrrect on early silicon */
LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 1024k flash");
flash_size_in_kb = 1024;
}
/* split reported size into matching bank */
if (bank->base != 0x08080000)
{
/* bank 0 will be fixed 512k */
flash_size_in_kb = 512;
}
else
{
flash_size_in_kb -= 512;
/* bank1 also uses a register offset */
stm32x_info->register_base = FLASH_REG_BASE_B1;
base_address = 0x08080000;
}
}
else
{
LOG_WARNING("Cannot identify target as a STM32 family.");
return ERROR_FAIL;
}
LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
/* did we assign flash size? */
assert(flash_size_in_kb != 0xffff);
/* calculate numbers of pages */
int num_pages = flash_size_in_kb * 1024 / page_size;
/* check that calculation result makes sense */
assert(num_pages > 0);
if (bank->sectors)
{
free(bank->sectors);
bank->sectors = NULL;
}
bank->base = base_address;
bank->size = (num_pages * page_size);
bank->num_sectors = num_pages;
bank->sectors = malloc(sizeof(struct flash_sector) * num_pages);
for (i = 0; i < num_pages; i++)
{
bank->sectors[i].offset = i * page_size;
bank->sectors[i].size = page_size;
bank->sectors[i].is_erased = -1;
bank->sectors[i].is_protected = 1;
}
stm32x_info->probed = 1;
return ERROR_OK;
}
static int stm32x_auto_probe(struct flash_bank *bank)
{
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
if (stm32x_info->probed)
return ERROR_OK;
return stm32x_probe(bank);
}
#if 0
COMMAND_HANDLER(stm32x_handle_part_id_command)
{
return ERROR_OK;
}
#endif
static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
{
struct target *target = bank->target;
uint32_t device_id;
int printed;
/* read stm32 device id register */
int retval = target_read_u32(target, 0xE0042000, &device_id);
if (retval != ERROR_OK)
return retval;
if ((device_id & 0xfff) == 0x410) {
printed = snprintf(buf, buf_size, "stm32x (Medium Density) - Rev: ");
buf += printed;
buf_size -= printed;
switch (device_id >> 16)
{
case 0x0000:
snprintf(buf, buf_size, "A");
break;
case 0x2000:
snprintf(buf, buf_size, "B");
break;
case 0x2001:
snprintf(buf, buf_size, "Z");
break;
case 0x2003:
snprintf(buf, buf_size, "Y");
break;
default:
snprintf(buf, buf_size, "unknown");
break;
}
} else if ((device_id & 0xfff) == 0x412) {
printed = snprintf(buf, buf_size, "stm32x (Low Density) - Rev: ");
buf += printed;
buf_size -= printed;
switch (device_id >> 16)
{
case 0x1000:
snprintf(buf, buf_size, "A");
break;
default:
snprintf(buf, buf_size, "unknown");
break;
}
} else if ((device_id & 0xfff) == 0x414) {
printed = snprintf(buf, buf_size, "stm32x (High Density) - Rev: ");
buf += printed;
buf_size -= printed;
switch (device_id >> 16)
{
case 0x1000:
snprintf(buf, buf_size, "A");
break;
case 0x1001:
snprintf(buf, buf_size, "Z");
break;
default:
snprintf(buf, buf_size, "unknown");
break;
}
} else if ((device_id & 0xfff) == 0x418) {
printed = snprintf(buf, buf_size, "stm32x (Connectivity) - Rev: ");
buf += printed;
buf_size -= printed;
switch (device_id >> 16)
{
case 0x1000:
snprintf(buf, buf_size, "A");
break;
case 0x1001:
snprintf(buf, buf_size, "Z");
break;
default:
snprintf(buf, buf_size, "unknown");
break;
}
} else if ((device_id & 0xfff) == 0x420) {
printed = snprintf(buf, buf_size, "stm32x (Value) - Rev: ");
buf += printed;
buf_size -= printed;
switch (device_id >> 16)
{
case 0x1000:
snprintf(buf, buf_size, "A");
break;
case 0x1001:
snprintf(buf, buf_size, "Z");
break;
default:
snprintf(buf, buf_size, "unknown");
break;
}
} else if ((device_id & 0xfff) == 0x428) {
printed = snprintf(buf, buf_size, "stm32x (Value HD) - Rev: ");
buf += printed;
buf_size -= printed;
switch (device_id >> 16)
{
case 0x1000:
snprintf(buf, buf_size, "A");
break;
case 0x1001:
snprintf(buf, buf_size, "Z");
break;
default:
snprintf(buf, buf_size, "unknown");
break;
}
} else if ((device_id & 0xfff) == 0x430) {
printed = snprintf(buf, buf_size, "stm32x (XL) - Rev: ");
buf += printed;
buf_size -= printed;
switch (device_id >> 16)
{
case 0x1000:
snprintf(buf, buf_size, "A");
break;
default:
snprintf(buf, buf_size, "unknown");
break;
}
}
else
{
snprintf(buf, buf_size, "Cannot identify target as a stm32x\n");
return ERROR_FAIL;
}
return ERROR_OK;
}
COMMAND_HANDLER(stm32x_handle_lock_command)
{
struct target *target = NULL;
struct stm32x_flash_bank *stm32x_info = NULL;
if (CMD_ARGC < 1)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
struct flash_bank *bank;
int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
if (ERROR_OK != retval)
return retval;
stm32x_info = bank->driver_priv;
target = bank->target;
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
retval = stm32x_check_operation_supported(bank);
if (ERROR_OK != retval)
return retval;
if (stm32x_erase_options(bank) != ERROR_OK)
{
command_print(CMD_CTX, "stm32x failed to erase options");
return ERROR_OK;
}
/* set readout protection */
stm32x_info->option_bytes.RDP = 0;
if (stm32x_write_options(bank) != ERROR_OK)
{
command_print(CMD_CTX, "stm32x failed to lock device");
return ERROR_OK;
}
command_print(CMD_CTX, "stm32x locked");
return ERROR_OK;
}
COMMAND_HANDLER(stm32x_handle_unlock_command)
{
struct target *target = NULL;
if (CMD_ARGC < 1)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
struct flash_bank *bank;
int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
if (ERROR_OK != retval)
return retval;
target = bank->target;
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
retval = stm32x_check_operation_supported(bank);
if (ERROR_OK != retval)
return retval;
if (stm32x_erase_options(bank) != ERROR_OK)
{
command_print(CMD_CTX, "stm32x failed to unlock device");
return ERROR_OK;
}
if (stm32x_write_options(bank) != ERROR_OK)
{
command_print(CMD_CTX, "stm32x failed to lock device");
return ERROR_OK;
}
command_print(CMD_CTX, "stm32x unlocked.\n"
"INFO: a reset or power cycle is required "
"for the new settings to take effect.");
return ERROR_OK;
}
COMMAND_HANDLER(stm32x_handle_options_read_command)
{
uint32_t optionbyte;
struct target *target = NULL;
struct stm32x_flash_bank *stm32x_info = NULL;
if (CMD_ARGC < 1)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
struct flash_bank *bank;
int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
if (ERROR_OK != retval)
return retval;
stm32x_info = bank->driver_priv;
target = bank->target;
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
retval = stm32x_check_operation_supported(bank);
if (ERROR_OK != retval)
return retval;
retval = target_read_u32(target, STM32_FLASH_OBR_B0, &optionbyte);
if (retval != ERROR_OK)
return retval;
command_print(CMD_CTX, "Option Byte: 0x%" PRIx32 "", optionbyte);
if (buf_get_u32((uint8_t*)&optionbyte, OPT_ERROR, 1))
command_print(CMD_CTX, "Option Byte Complement Error");
if (buf_get_u32((uint8_t*)&optionbyte, OPT_READOUT, 1))
command_print(CMD_CTX, "Readout Protection On");
else
command_print(CMD_CTX, "Readout Protection Off");
if (buf_get_u32((uint8_t*)&optionbyte, OPT_RDWDGSW, 1))
command_print(CMD_CTX, "Software Watchdog");
else
command_print(CMD_CTX, "Hardware Watchdog");
if (buf_get_u32((uint8_t*)&optionbyte, OPT_RDRSTSTOP, 1))
command_print(CMD_CTX, "Stop: No reset generated");
else
command_print(CMD_CTX, "Stop: Reset generated");
if (buf_get_u32((uint8_t*)&optionbyte, OPT_RDRSTSTDBY, 1))
command_print(CMD_CTX, "Standby: No reset generated");
else
command_print(CMD_CTX, "Standby: Reset generated");
if (stm32x_info->has_dual_banks)
{
if (buf_get_u32((uint8_t*)&optionbyte, OPT_BFB2, 1))
command_print(CMD_CTX, "Boot: Bank 0");
else
command_print(CMD_CTX, "Boot: Bank 1");
}
return ERROR_OK;
}
COMMAND_HANDLER(stm32x_handle_options_write_command)
{
struct target *target = NULL;
struct stm32x_flash_bank *stm32x_info = NULL;
uint16_t optionbyte = 0xF8;
if (CMD_ARGC < 4)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
struct flash_bank *bank;
int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
if (ERROR_OK != retval)
return retval;
stm32x_info = bank->driver_priv;
target = bank->target;
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
retval = stm32x_check_operation_supported(bank);
if (ERROR_OK != retval)
return retval;
/* REVISIT: ignores some options which we will display...
* and doesn't insist on the specified syntax.
*/
/* OPT_RDWDGSW */
if (strcmp(CMD_ARGV[1], "SWWDG") == 0)
{
optionbyte |= (1 << 0);
}
else /* REVISIT must be "HWWDG" then ... */
{
optionbyte &= ~(1 << 0);
}
/* OPT_RDRSTSTOP */
if (strcmp(CMD_ARGV[2], "NORSTSTOP") == 0)
{
optionbyte |= (1 << 1);
}
else /* REVISIT must be "RSTSTNDBY" then ... */
{
optionbyte &= ~(1 << 1);
}
/* OPT_RDRSTSTDBY */
if (strcmp(CMD_ARGV[3], "NORSTSTNDBY") == 0)
{
optionbyte |= (1 << 2);
}
else /* REVISIT must be "RSTSTOP" then ... */
{
optionbyte &= ~(1 << 2);
}
if (CMD_ARGC > 4 && stm32x_info->has_dual_banks)
{
/* OPT_BFB2 */
if (strcmp(CMD_ARGV[4], "BOOT0") == 0)
{
optionbyte |= (1 << 3);
}
else
{
optionbyte &= ~(1 << 3);
}
}
if (stm32x_erase_options(bank) != ERROR_OK)
{
command_print(CMD_CTX, "stm32x failed to erase options");
return ERROR_OK;
}
stm32x_info->option_bytes.user_options = optionbyte;
if (stm32x_write_options(bank) != ERROR_OK)
{
command_print(CMD_CTX, "stm32x failed to write options");
return ERROR_OK;
}
command_print(CMD_CTX, "stm32x write options complete.\n"
"INFO: a reset or power cycle is required "
"for the new settings to take effect.");
return ERROR_OK;
}
static int stm32x_mass_erase(struct flash_bank *bank)
{
struct target *target = bank->target;
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* unlock option flash registers */
int retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
if (retval != ERROR_OK)
return retval;
/* mass erase flash memory */
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER | FLASH_STRT);
if (retval != ERROR_OK)
return retval;
retval = stm32x_wait_status_busy(bank, 100);
if (retval != ERROR_OK)
return retval;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
COMMAND_HANDLER(stm32x_handle_mass_erase_command)
{
int i;
if (CMD_ARGC < 1)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
struct flash_bank *bank;
int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
if (ERROR_OK != retval)
return retval;
retval = stm32x_mass_erase(bank);
if (retval == ERROR_OK)
{
/* set all sectors as erased */
for (i = 0; i < bank->num_sectors; i++)
{
bank->sectors[i].is_erased = 1;
}
command_print(CMD_CTX, "stm32x mass erase complete");
}
else
{
command_print(CMD_CTX, "stm32x mass erase failed");
}
return retval;
}
static const struct command_registration stm32x_exec_command_handlers[] = {
{
.name = "lock",
.handler = stm32x_handle_lock_command,
.mode = COMMAND_EXEC,
.usage = "bank_id",
.help = "Lock entire flash device.",
},
{
.name = "unlock",
.handler = stm32x_handle_unlock_command,
.mode = COMMAND_EXEC,
.usage = "bank_id",
.help = "Unlock entire protected flash device.",
},
{
.name = "mass_erase",
.handler = stm32x_handle_mass_erase_command,
.mode = COMMAND_EXEC,
.usage = "bank_id",
.help = "Erase entire flash device.",
},
{
.name = "options_read",
.handler = stm32x_handle_options_read_command,
.mode = COMMAND_EXEC,
.usage = "bank_id",
.help = "Read and display device option byte.",
},
{
.name = "options_write",
.handler = stm32x_handle_options_write_command,
.mode = COMMAND_EXEC,
.usage = "bank_id ('SWWDG'|'HWWDG') "
"('RSTSTNDBY'|'NORSTSTNDBY') "
"('RSTSTOP'|'NORSTSTOP')",
.help = "Replace bits in device option byte.",
},
COMMAND_REGISTRATION_DONE
};
static const struct command_registration stm32x_command_handlers[] = {
{
.name = "stm32f1x",
.mode = COMMAND_ANY,
.help = "stm32f1x flash command group",
.usage = "",
.chain = stm32x_exec_command_handlers,
},
COMMAND_REGISTRATION_DONE
};
struct flash_driver stm32f1x_flash = {
.name = "stm32f1x",
.commands = stm32x_command_handlers,
.flash_bank_command = stm32x_flash_bank_command,
.erase = stm32x_erase,
.protect = stm32x_protect,
.write = stm32x_write,
.read = default_flash_read,
.probe = stm32x_probe,
.auto_probe = stm32x_auto_probe,
.erase_check = default_flash_mem_blank_check,
.protect_check = stm32x_protect_check,
.info = get_stm32x_info,
};
Reference in New Issue View Git Blame Copy Permalink