81d0b769a6
Cortex-M target used 'auto_bp_type' mode. The requested type of breakpoint was ignored and hard (FPB) breakpoints were set in 'code memory area' 0x00000000-0x1fffffff, soft breakpoints were set above 0x20000000. The code memory area of Cortex-M does not mean the memory is flash and vice versa. External flash (parallel or QSPI) is usually mapped above code memory area. Cortex-M7 ITCM RAM is mapped at 0. Kinetis has a RAM block under 0x20000000 boundary. Remove 'auto_bp_type' mode, set breakpoints to requested type. Change 'cortex_m maskisr auto' handling to use a hard temporary breakpoint everywhere: it can also workaround not working soft breakpoints on Cortex-M7 with ICache enabled. Change-Id: I7a9f9464c5e10bfd7f17cba1037ed07a064fa2e8 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4429 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> |
||
|---|---|---|
| .. | ||
| manual | ||
| fdl.texi | ||
| Makefile.am | ||
| openocd.1 | ||
| openocd.texi | ||