Steve Marple 82fd400542 jtag/adapter: Add command 'adapter gpio' ... Most adapters define their own commands to obtain the GPIO number and other GPIO configuration information such as chip number, output drive type, active high/low. Define a general command 'adapter gpio' as replacement for the driver-specific ones. Change-Id: I1ca9ca94f0c7df5713172e9f62ffb0ad64e9ee97 Signed-off-by: Steve Marple <stevemarple@googlemail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6967 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>		2022-08-15 13:24:22 +00:00
..
flash	target: add API to temporarily mask target polling	2022-08-15 13:22:06 +00:00
helper	target: add API to temporarily mask target polling	2022-08-15 13:22:06 +00:00
jtag	jtag/adapter: Add command 'adapter gpio'	2022-08-15 13:24:22 +00:00
pld	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
rtos	rtos: Support for "none" rtos	2022-08-15 13:19:21 +00:00
rtt	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
server	gdb_server: custom target-specific GDB queries	2022-08-15 13:23:05 +00:00
svf	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
target	target/cortex_m: supress historical reset detection	2022-08-15 13:23:57 +00:00
transport	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
xsvf	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
Makefile.am	openocd: build: add SPDX tag	2022-07-23 13:06:38 +00:00
hello.c	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
hello.h	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
main.c	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00
openocd.c	openocd: prevent target polling during 'init'	2022-08-15 13:22:18 +00:00
openocd.h	openocd: src: replace the GPL-2.0-or-later license tag	2022-07-23 13:59:13 +00:00