Salvador Arroyo 115b7be426 Pic32mx.cfg: Change system clock to 8Mhz after reset-init. ... As for openocd 0.6.0-rc2 the function mips32_pracc_fastdata_xfer() should now work at a scan frequency up to 1200Khz. Mainly usefull to increase programming speed. Also verify_image should be slightly faster. Change-Id: I1e9b2be73690a4597e2f6ba069c1205026850f07 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/805 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>		2012-11-16 12:25:19 +00:00
..
board	Generic LPC1850 board w/ SPIFI flash.	2012-11-06 14:34:16 +00:00
chip	config: fix typo in at91 config	2012-03-06 10:30:54 +00:00
cpld	Add config file for Lattice LC4032ZE CPLD (ispMACH 4000ZE family)	2012-07-17 08:29:32 +00:00
cpu/arm	Move TCL script files -- Step 2 of 2:	2009-05-27 06:49:24 +00:00
interface	ftdi/flyswatter2.cfg: Define the LED signal	2012-10-28 05:25:17 +00:00
target	Pic32mx.cfg: Change system clock to 8Mhz after reset-init.	2012-11-16 12:25:19 +00:00
test	TCL scripts: replace "puts" with "echo"	2010-11-09 08:12:51 +01:00
bitsbytes.tcl	TCL scripts: replace "puts" with "echo"	2010-11-09 08:12:51 +01:00
mem_helper.tcl	TCL scripts: fix ocd_mem2array/mem2array	2010-09-28 10:44:50 +02:00
memory.tcl	tcl: remove silly ocd_ prefix to array2mem and mem2array	2010-08-11 17:24:55 +02:00
mmr_helpers.tcl	TCL scripts: replace "puts" with "echo"	2010-11-09 08:12:51 +01:00