45 lines
1.4 KiB
INI
45 lines
1.4 KiB
INI
#Marvell/Intel PXA270 Script
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME pxa270
|
|
}
|
|
|
|
if { [info exists ENDIAN] } {
|
|
set _ENDIAN $ENDIAN
|
|
} else {
|
|
set _ENDIAN little
|
|
}
|
|
|
|
if { [info exists CPUTAPID ] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
# force an error till we get a good number
|
|
set _CPUTAPID 0xffffffff
|
|
}
|
|
|
|
|
|
# set jtag_nsrst_delay to the delay introduced by your reset circuit
|
|
# the rest of the needed delays are built into the openocd program
|
|
jtag_nsrst_delay 260
|
|
# set the jtag_ntrst_delay to the delay introduced by a reset circuit
|
|
# the rest of the needed delays are built into the openocd program
|
|
jtag_ntrst_delay 0
|
|
#use combined on interfaces or targets that can't set TRST/SRST separately
|
|
reset_config trst_and_srst separate
|
|
#jtag scan chain
|
|
|
|
|
|
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
|
|
jtag newtap $_TARGETNAME -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
|
|
|
|
target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x
|
|
# maps to PXA internal RAM. If you are using a PXA255
|
|
# you must initialize SDRAM or leave this option off
|
|
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0
|
|
|
|
#flash bank <driver> <base> <size> <chip_width> <bus_width>
|
|
# works for P30 flash
|
|
flash bank cfi 0x00000000 0x1000000 2 4 0
|