6060545458
Adding flash programming support for Maxim Integrated MAX32XXX devices. Change-Id: I5b0f57a885f9d813240e4bc2d9f765b743e1cfc3 Signed-off-by: Kevin Gillespie <kgills@gmail.com> Reviewed-on: http://openocd.zylin.com/3543 Tested-by: jenkins Reviewed-by: Ismail H. KOSE <ihkose@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
29 lines
1.1 KiB
INI
29 lines
1.1 KiB
INI
# Maxim Integrated MAX32620 OpenOCD target configuration file
|
|
# www.maximintegrated.com
|
|
|
|
# adapter speed
|
|
adapter_khz 4000
|
|
|
|
# reset pin configuration
|
|
reset_config srst_only
|
|
|
|
if {[using_jtag]} {
|
|
jtag newtap max32620 cpu -irlen 4 -irmask 0xf -expected-id 0x4ba00477 -ignore-version
|
|
jtag newtap maxtest tap -irlen 4 -irmask 0xf -ircapture 0x1 -ignore-version
|
|
} else {
|
|
swd newdap max32620 cpu -irlen 4 -irmask 0xf -expected-id 0x2ba01477 -ignore-version
|
|
}
|
|
|
|
# target configuration
|
|
target create max32620.cpu cortex_m -chain-position max32620.cpu
|
|
max32620.cpu configure -work-area-phys 0x20005000 -work-area-size 0x2000
|
|
|
|
# Config Command: flash bank name driver base size chip_width bus_width target [driver_options]
|
|
# flash bank <name> max32xxx <base> <size> 0 0 <target> <flc base> <sector> <clk> <burst>
|
|
# max32620 flash base address 0x00000000
|
|
# max32620 flash size 0x200000 (2MB)
|
|
# max32620 FLC base address 0x40002000
|
|
# max32620 sector (page) size 0x2000 (8kB)
|
|
# max32620 clock speed 96 (MHz)
|
|
flash bank max32620.flash max32xxx 0x00000000 0x200000 0 0 max32620.cpu 0x40002000 0x2000 96
|