b5fa1e4d77
This adds support for the Atmel SAML21 variant B parts. There is minimal change between the two variants, but in variant B the automatic page write which the at91samd flash driver relies on to be enabled is disabled by default. With this patch the write row function will now issue a page write command after each of the four pages in the row if the MANW (manual write) bit is set. This also fixes flash write for the SAMC20/SAMC21 devices which have the MANW bit set by default as well. I have also moved the device ID (DID) register bitfield extraction from the find_part into helper macros. These can be used in the future if there are more workarounds for specific devices. Tested (programming) on: ATSAML21-XPRO ATSAML21-XPRO-B SAMC21 Xplained Pro SAMD21 Xplained Pro SAMD20 Xplained Pro Change-Id: I401a8aa1efd64730840c0d62cf49a1e880ea5900 Signed-off-by: Andreas Loehre <alohre@gmail.com> Reviewed-on: http://openocd.zylin.com/2903 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> |
||
---|---|---|
.. | ||
flash | ||
helper | ||
jtag | ||
pld | ||
rtos | ||
server | ||
svf | ||
target | ||
transport | ||
xsvf | ||
hello.c | ||
hello.h | ||
main.c | ||
Makefile.am | ||
openocd.c | ||
openocd.h |