openocd/src
Paul Fertser bf96df255e jtag/drivers/ftdi: require defining SWD_EN signal for SWD mode
Use a special signal instead of a dedicated swd mask. Amend
jtag-lock-pick_tiny_2 config accordingly.

Change-Id: Ifb007a0b5434b590c52f936efd5f5458e913e2e4
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2183
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
2014-06-28 09:36:53 +00:00
..
flash flash: samd: add SAMD10 and SAMD11 part IDs 2014-06-22 08:47:49 +00:00
helper swd: Improve parity calculation and move it to types.h 2014-06-28 09:27:19 +00:00
jtag jtag/drivers/ftdi: require defining SWD_EN signal for SWD mode 2014-06-28 09:36:53 +00:00
pld update files to correct FSF address 2013-06-05 19:52:42 +00:00
rtos Don't cast return value of [cm]alloc 2014-03-30 03:53:45 +00:00
server openrisc: add support for JTAG Serial Port 2014-06-22 08:39:08 +00:00
svf svf: Only read TDO back from the device if we actually need to look at the bits. 2014-06-22 08:32:13 +00:00
target Relax polling check if not in JTAG mode 2014-06-28 09:34:55 +00:00
transport transport: Constify the transports vector 2014-06-28 09:33:31 +00:00
xsvf update files to correct FSF address 2013-06-05 19:52:42 +00:00
hello.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
hello.h update files to correct FSF address 2013-06-05 19:52:42 +00:00
main.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
Makefile.am Makefile.am: fix build for libftdi1, pass CFLAGS where appropriate 2014-04-14 18:09:40 +00:00
openocd.c update files to correct FSF address 2013-06-05 19:52:42 +00:00
openocd.h update files to correct FSF address 2013-06-05 19:52:42 +00:00