Angus Gratton d50cc1bfea jtag/drivers/ftdi: Use adapter_khz value for initial clock speed (was default 1kHz) ... nrf51822 doesn't like a 1kHz initial clock rate, puts the DAP into a bad state. Mailing list discussion thread: http://sourceforge.net/p/openocd/mailman/openocd-devel/thread/20140718081528.GA5554%40ex2.lan/#msg32621853 Change-Id: I71aa75505cc1b41ee80c7b9db415f6ac738c2916 Signed-off-by: Angus Gratton <gus@projectgus.com> Reviewed-on: http://openocd.zylin.com/2223 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>		2014-08-19 20:26:26 +00:00
..
flash	flash: samd: add missing ID for SAMD20E18A	2014-08-19 20:24:02 +00:00
helper	Removed limit on lenght of command line options.	2014-08-12 21:04:27 +00:00
jtag	jtag/drivers/ftdi: Use adapter_khz value for initial clock speed (was default 1kHz)	2014-08-19 20:26:26 +00:00
pld	update files to correct FSF address	2013-06-05 19:52:42 +00:00
rtos	Don't cast return value of [cm]alloc	2014-03-30 03:53:45 +00:00
server	openrisc: add support for JTAG Serial Port	2014-06-22 08:39:08 +00:00
svf	Openocd: svf: Add ability to ignore svf_check_tdo errors	2014-07-03 18:08:48 +00:00
target	mips_m4k.c: EJTAGBOOT and NORMALBOOT are not supported on EJTAG 2.0	2014-08-19 20:18:16 +00:00
transport	transport: emit a warning when a user tries to reselect a transport	2014-08-19 20:19:58 +00:00
xsvf	update files to correct FSF address	2013-06-05 19:52:42 +00:00
hello.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
hello.h	update files to correct FSF address	2013-06-05 19:52:42 +00:00
main.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
Makefile.am	Fix some problems with the bin2char utility	2014-08-02 09:01:32 +00:00
openocd.c	Fix some problems with the bin2char utility	2014-08-02 09:01:32 +00:00
openocd.h	Fix some problems with the bin2char utility	2014-08-02 09:01:32 +00:00