4157732bd8
For historical reasons, no license information was added to the tcl files. This makes trivial adding the SPDX tag through script: fgrep -rL SPDX tcl/board | while read a;do \ sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n }' $a;done With no specific license information from the author, let's extend the OpenOCD project license GPL-2.0-or-later to the files. Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7028 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
72 lines
2.1 KiB
INI
72 lines
2.1 KiB
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
# board config file for AcTux3/XBA IXP42x board
|
|
# Date: 2010-12-16
|
|
# Author: Michael Schwingen <michael@schwingen.org>
|
|
|
|
reset_config trst_and_srst separate
|
|
|
|
adapter srst delay 100
|
|
jtag_ntrst_delay 100
|
|
|
|
source [find target/ixp42x.cfg]
|
|
|
|
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x10000 -work-area-backup 0
|
|
|
|
$_TARGETNAME configure -event reset-init { init_actux3 }
|
|
|
|
proc init_actux3 { } {
|
|
##########################################################################
|
|
# setup expansion bus CS
|
|
##########################################################################
|
|
mww 0xc4000000 0xbd113842 ;#CS0 : Flash, write enabled @0x50000000
|
|
mww 0xc4000004 0x94d10013 ;#CS1
|
|
mww 0xc4000008 0x95960003 ;#CS2
|
|
mww 0xc400000c 0x00000000 ;#CS3
|
|
mww 0xc4000010 0x80900003 ;#CS4
|
|
mww 0xc4000014 0x9d520003 ;#CS5
|
|
mww 0xc4000018 0x81860001 ;#CS6
|
|
mww 0xc400001c 0x80900003 ;#CS7
|
|
|
|
ixp42x_init_sdram $::IXP42x_SDRAM_16MB_4Mx16_1BANK 2100 3
|
|
|
|
#mww 0xc4000020 0xffffee ;# CFG0: remove expansion bus boot flash mirror at 0x00000000
|
|
|
|
ixp42x_set_bigendian
|
|
|
|
flash probe 0
|
|
}
|
|
|
|
proc flash_boot { {FILE "/tftpboot/actux3/u-boot.bin"} } {
|
|
echo "writing bootloader: $FILE"
|
|
flash write_image erase $FILE 0x50000000 bin
|
|
}
|
|
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME cfi 0x50000000 0x400000 2 2 $_TARGETNAME
|
|
|
|
init
|
|
reset init
|
|
|
|
# setup to debug u-boot in flash
|
|
proc uboot_debug {} {
|
|
gdb_breakpoint_override hard
|
|
xscale vector_catch 0xFF
|
|
|
|
xscale vector_table low 1 0xe59ff018
|
|
xscale vector_table low 2 0xe59ff018
|
|
xscale vector_table low 3 0xe59ff018
|
|
xscale vector_table low 4 0xe59ff018
|
|
xscale vector_table low 5 0xe59ff018
|
|
xscale vector_table low 6 0xe59ff018
|
|
xscale vector_table low 7 0xe59ff018
|
|
|
|
xscale vector_table high 1 0xe59ff018
|
|
xscale vector_table high 2 0xe59ff018
|
|
xscale vector_table high 3 0xe59ff018
|
|
xscale vector_table high 4 0xe59ff018
|
|
xscale vector_table high 5 0xe59ff018
|
|
xscale vector_table high 6 0xe59ff018
|
|
xscale vector_table high 7 0xe59ff018
|
|
}
|