0da0bfd40a
This gets rid of runtime warnings from the use of numbers. STM32 and LPC2103 were tested. Other LPC updates are the same, and so are safe. The CFI updates match other tested changes now in the tree. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
52 lines
1.3 KiB
INI
52 lines
1.3 KiB
INI
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME at9r40008
|
|
}
|
|
|
|
if { [info exists ENDIAN] } {
|
|
set _ENDIAN $ENDIAN
|
|
} else {
|
|
set _ENDIAN little
|
|
}
|
|
|
|
if { [info exists CPUTAPID ] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
# force an error till we get a good number
|
|
set _CPUTAPID 0xffffffff
|
|
}
|
|
|
|
jtag_nsrst_delay 200
|
|
jtag_ntrst_delay 200
|
|
|
|
#use combined on interfaces or targets that can't set TRST/SRST separately
|
|
reset_config srst_only srst_pulls_trst
|
|
|
|
#jtag scan chain
|
|
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
|
|
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
|
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
|
|
|
|
|
|
$_TARGETNAME configure -event gdb-flash-erase-start {
|
|
wait_halt
|
|
sleep 10
|
|
poll
|
|
# Ethernut 3 remapping is required to access external flash memory.
|
|
mww 0xffe00000 0x1000213d
|
|
mww 0xffe00004 0x20003e3d
|
|
mww 0xffe00020 0x00000001
|
|
}
|
|
|
|
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0
|
|
|
|
flash bank cfi 0x10000000 0x400000 2 2 $_TARGETNAME
|
|
|
|
# For more information about the configuration files, take a look at:
|
|
# openocd.texi
|