openocd/tcl/target/zynq_7000.cfg
Tim Sander 91a36fcf0a tcl: add Zynq-7000 target and Zedboard board configs
Change-Id: Ia7f2a57d1b32dda9936ad87e22635f7749ff3ce1
Signed-off-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2061
Tested-by: jenkins
2014-03-29 07:16:00 +00:00

26 lines
794 B
INI

#
# Xilinx Zynq-7000 All Programmable SoC
#
# http://www.xilinx.com/products/silicon-devices/soc/zynq-7000/index.htm
#
set _CHIPNAME zynq
set _TARGETNAME $_CHIPNAME.cpu
jtag newtap zynq_pl bs -irlen 6 -ircapture 0x1 -irmask 0x03 \
-expected-id 0x23727093 \
-expected-id 0x03727093
jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4ba00477
target create ${_TARGETNAME}0 cortex_a -chain-position $_CHIPNAME.dap \
-coreid 0 -dbgbase 0x80090000
target create ${_TARGETNAME}1 cortex_a -chain-position $_CHIPNAME.dap \
-coreid 1 -dbgbase 0x80092000
target smp ${_TARGETNAME}0 ${_TARGETNAME}1
adapter_khz 1000
${_TARGETNAME}0 configure -event reset-assert-post "cortex_a dbginit"
${_TARGETNAME}1 configure -event reset-assert-post "cortex_a dbginit"