7a7086e644
Original submitted code had only been tested with em358, but testing with actual em357 revealed errors that this patch corrects. Change-Id: I70cf31210de8ed84e3755a56e76261ad200322bb Signed-off-by: Ed Beroset <beroset@ieee.org> Reviewed-on: http://openocd.zylin.com/2581 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
77 lines
2.0 KiB
INI
77 lines
2.0 KiB
INI
#
|
|
# Target configuration for the Silicon Labs EM357 chips
|
|
#
|
|
|
|
#
|
|
# em357 family supports JTAG and SWD transports
|
|
#
|
|
source [find target/swj-dp.tcl]
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME em357
|
|
}
|
|
|
|
# Work-area is a space in RAM used for flash programming
|
|
# By default use 4kB
|
|
if { [info exists WORKAREASIZE] } {
|
|
set _WORKAREASIZE $WORKAREASIZE
|
|
} else {
|
|
set _WORKAREASIZE 0x1000
|
|
}
|
|
|
|
if { [info exists CPUTAPID] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
if { [using_jtag] } {
|
|
set _CPUTAPID 0x3ba00477
|
|
} else {
|
|
set _CPUTAPID 0x1ba00477
|
|
}
|
|
}
|
|
|
|
if { [info exists BSTAPID] } {
|
|
set _BSTAPID $BSTAPID
|
|
} else {
|
|
set _BSTAPID 0x069a962b
|
|
}
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME em358
|
|
}
|
|
|
|
if { [info exists FLASHSIZE] } {
|
|
set _FLASHSIZE $FLASHSIZE
|
|
} else {
|
|
set _FLASHSIZE 0x30000
|
|
}
|
|
|
|
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
|
|
if { [using_jtag] } {
|
|
swj_newdap $_CHIPNAME bs -irlen 4 -expected-id $_BSTAPID -ircapture 0xe -irmask 0xf
|
|
}
|
|
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME cortex_m -endian little -chain-position $_TARGETNAME
|
|
|
|
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
|
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME em357 0x08000000 $_FLASHSIZE 0 0 $_TARGETNAME
|
|
|
|
if { ![using_hla]} {
|
|
# according to errata, we need to use vectreset rather than sysresetreq to avoid lockup
|
|
# There is a bug in the chip, which means that when using external debuggers the chip
|
|
# may lock up in certain CPU clock modes. Affected modes are operating the CPU at
|
|
# 24MHz derived from the 24MHz crystal, or 12MHz derived from the high frequency RC
|
|
# oscillator. If an external debugger tool asserts SYSRESETREQ, the chip will lock up and
|
|
# require a pin reset or power cycle.
|
|
#
|
|
# for details, refer to:
|
|
# http://www.silabs.com/Support%20Documents/TechnicalDocs/EM35x-Errata.pdf
|
|
cortex_m reset_config vectreset
|
|
}
|