Initial commit.
This commit is contained in:
commit
b9038dffaf
|
@ -0,0 +1,3 @@
|
|||
[submodule "SDK"]
|
||||
path = SDK
|
||||
url = https://git.minori.work/Embedded_SDK/MCUXpresso_LPC54102.git
|
|
@ -0,0 +1,137 @@
|
|||
cmake_minimum_required(VERSION 3.10)
|
||||
|
||||
project(lpc54102_hello)
|
||||
|
||||
enable_language(CXX)
|
||||
enable_language(ASM)
|
||||
|
||||
# Different linker scripts
|
||||
set(TARGET_LDSCRIPT_FLASH "${CMAKE_SOURCE_DIR}/SDK/devices/LPC54102/gcc/LPC54102J512_cm4_flash.ld")
|
||||
set(TARGET_LDSCRIPT_RAM "${CMAKE_SOURCE_DIR}/SDK/devices/LPC54102/gcc/LPC54102J512_cm4_ram.ld")
|
||||
|
||||
set(TARGET_SOURCES
|
||||
"SDK/components/serial_manager/serial_manager.c"
|
||||
"SDK/components/serial_manager/serial_port_uart.c"
|
||||
"SDK/components/uart/vusart_adapter.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_adc.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_clock.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_common.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_crc.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_ctimer.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_dma.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_flashiap.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_fmeas.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_gint.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_gpio.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_i2c.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_i2c_dma.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_iap.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_inputmux.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_mrt.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_pint.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_power.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_reset.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_rit.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_rtc.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_sctimer.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_spi.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_spi_dma.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_usart.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_usart_dma.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_utick.c"
|
||||
"SDK/devices/LPC54102/drivers/fsl_wwdt.c"
|
||||
"SDK/devices/LPC54102/gcc/startup_LPC54102_cm4.S"
|
||||
"SDK/devices/LPC54102/system_LPC54102_cm4.c"
|
||||
"SDK/devices/LPC54102/utilities/debug_console/fsl_debug_console.c"
|
||||
"SDK/devices/LPC54102/utilities/fsl_assert.c"
|
||||
"SDK/devices/LPC54102/utilities/fsl_notifier.c"
|
||||
"SDK/devices/LPC54102/utilities/fsl_sbrk.c"
|
||||
"SDK/devices/LPC54102/utilities/str/fsl_str.c"
|
||||
"board/board.c"
|
||||
"board/clock_config.c"
|
||||
"board/peripherals.c"
|
||||
"board/pin_mux.c"
|
||||
"src/main.c"
|
||||
)
|
||||
|
||||
set(TARGET_C_DEFINES
|
||||
"CPU_LPC54102J256BD64"
|
||||
"CPU_LPC54102J512BD64_cm4"
|
||||
"MCUXPRESSO_SDK"
|
||||
"SERIAL_PORT_TYPE_UART=1"
|
||||
"__STARTUP_CLEAR_BSS"
|
||||
)
|
||||
|
||||
set(TARGET_C_INCLUDES
|
||||
"SDK/CMSIS/Include"
|
||||
"SDK/components/serial_manager"
|
||||
"SDK/components/uart"
|
||||
"SDK/devices/LPC54102"
|
||||
"SDK/devices/LPC54102/drivers"
|
||||
"SDK/devices/LPC54102/utilities/debug_console"
|
||||
"SDK/devices/LPC54102/utilities/str"
|
||||
"board"
|
||||
"include"
|
||||
)
|
||||
|
||||
# Shared libraries linked with application
|
||||
set(TARGET_LIBS
|
||||
"power_cm4_hardabi"
|
||||
)
|
||||
|
||||
# Shared library and linker script search paths
|
||||
set(TARGET_LIB_DIRECTORIES
|
||||
"SDK/devices/LPC54102/gcc"
|
||||
)
|
||||
|
||||
# Device specific settings, goes to CFLAGS and LDFLAGS
|
||||
set(TARGET_CFLAGS_HARDWARE "-mcpu=cortex-m33 -mthumb -mfloat-abi=hard -mfpu=fpv5-sp-d16")
|
||||
|
||||
# Conditional flags
|
||||
# DEBUG
|
||||
set(CMAKE_C_FLAGS_DEBUG "-DDEBUG -Og -g")
|
||||
set(CMAKE_CXX_FLAGS_DEBUG "-DDEBUG -Og -g")
|
||||
set(CMAKE_ASM_FLAGS_DEBUG "-DDEBUG -Og -g")
|
||||
|
||||
# RELEASE
|
||||
set(CMAKE_C_FLAGS_RELEASE "-DNDEBUG -O2 -flto")
|
||||
set(CMAKE_CXX_FLAGS_RELEASE "-DNDEBUG -O2 -flto")
|
||||
set(CMAKE_ASM_FLAGS_RELEASE "-DNDEBUG -O2 -flto")
|
||||
set(CMAKE_EXE_LINKER_FLAGS_RELEASE "-flto")
|
||||
|
||||
# Final compiler flags
|
||||
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${TARGET_CFLAGS_HARDWARE} -Wall -fno-common -fno-builtin -ffreestanding -fdata-sections -ffunction-sections")
|
||||
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${TARGET_CFLAGS_HARDWARE} -Wall -fno-common -fno-builtin -ffreestanding -fdata-sections -ffunction-sections")
|
||||
set(CMAKE_ASM_FLAGS "${CMAKE_ASM_FLAGS} ${CMAKE_C_FLAGS} -x assembler-with-cpp")
|
||||
set(CMAKE_EXE_LINKER_FLAGS "-specs=nano.specs -specs=nosys.specs -Wl,--gc-sections -Wl,--print-memory-usage -lc -lm -lnosys ")
|
||||
|
||||
|
||||
# Shared sources, includes and definitions
|
||||
add_compile_definitions(${TARGET_C_DEFINES})
|
||||
include_directories(${TARGET_C_INCLUDES})
|
||||
link_directories(${TARGET_LIB_DIRECTORIES})
|
||||
link_libraries(${TARGET_LIBS})
|
||||
|
||||
# Main targets are added here
|
||||
|
||||
# Create ELF
|
||||
add_executable("${CMAKE_PROJECT_NAME}_FLASH.elf" ${TARGET_SOURCES})
|
||||
target_link_options("${CMAKE_PROJECT_NAME}_FLASH.elf"
|
||||
PRIVATE "-T${TARGET_LDSCRIPT_FLASH}"
|
||||
)
|
||||
add_custom_command(OUTPUT "${CMAKE_PROJECT_NAME}_FLASH.hex"
|
||||
COMMAND ${CMAKE_OBJCOPY} "-O" "ihex" "${CMAKE_PROJECT_NAME}_FLASH.elf" "${CMAKE_PROJECT_NAME}_FLASH.hex"
|
||||
DEPENDS "${CMAKE_PROJECT_NAME}_FLASH.elf"
|
||||
)
|
||||
add_custom_target("${CMAKE_PROJECT_NAME}_FLASH_HEX" DEPENDS "${CMAKE_PROJECT_NAME}_FLASH.hex")
|
||||
|
||||
# Create ELF
|
||||
add_executable("${CMAKE_PROJECT_NAME}_RAM.elf" ${TARGET_SOURCES})
|
||||
target_link_options("${CMAKE_PROJECT_NAME}_RAM.elf"
|
||||
PRIVATE "-T${TARGET_LDSCRIPT_RAM}"
|
||||
)
|
||||
add_custom_command(OUTPUT "${CMAKE_PROJECT_NAME}_RAM.hex"
|
||||
COMMAND ${CMAKE_OBJCOPY} "-O" "ihex" "${CMAKE_PROJECT_NAME}_RAM.elf" "${CMAKE_PROJECT_NAME}_RAM.hex"
|
||||
DEPENDS "${CMAKE_PROJECT_NAME}_RAM.elf"
|
||||
)
|
||||
add_custom_target("${CMAKE_PROJECT_NAME}_RAM_HEX" DEPENDS "${CMAKE_PROJECT_NAME}_RAM.hex")
|
|
@ -0,0 +1,176 @@
|
|||
<?xml version="1.0" encoding= "UTF-8" ?>
|
||||
<configuration name="LPC54102J512" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_11 http://mcuxpresso.nxp.com/XSD/mex_configuration_11.xsd" uuid="1ea9ba79-e007-415b-b3ad-7f5dc302a761" version="11" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_11" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
|
||||
<common>
|
||||
<processor>LPC54102J512</processor>
|
||||
<package>LPC54102J512BD64</package>
|
||||
<mcu_data>ksdk2_0</mcu_data>
|
||||
<cores selected="cm4">
|
||||
<core name="Cortex-M0P" id="cm0plus" description=""/>
|
||||
<core name="Cortex-M4F" id="cm4" description=""/>
|
||||
</cores>
|
||||
<description></description>
|
||||
</common>
|
||||
<preferences>
|
||||
<validate_boot_init_only>true</validate_boot_init_only>
|
||||
<generate_extended_information>false</generate_extended_information>
|
||||
<generate_code_modified_registers_only>false</generate_code_modified_registers_only>
|
||||
<update_include_paths>true</update_include_paths>
|
||||
<generate_registers_defines>false</generate_registers_defines>
|
||||
</preferences>
|
||||
<tools>
|
||||
<pins name="Pins" version="11.0" enabled="true" update_project_code="true">
|
||||
<generated_project_files>
|
||||
<file path="board/pin_mux.c" update_enabled="true"/>
|
||||
<file path="board/pin_mux.h" update_enabled="true"/>
|
||||
</generated_project_files>
|
||||
<pins_profile>
|
||||
<processor_version>11.0.1</processor_version>
|
||||
</pins_profile>
|
||||
<functions_list>
|
||||
<function name="BOARD_InitPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>true</callFromInitBoot>
|
||||
<coreID>cm4</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="Peripheral" resourceId="USART0" description="Peripheral USART0 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
|
||||
<feature name="initialized" evaluation="equal" configuration="cm4">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm4">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins>
|
||||
<pin peripheral="USART0" signal="RXD" pin_num="31" pin_signal="PIO0_0/U0_RXD/SPI0_SSEL0/CT32B0_CAP0/SCT0_OUT3"/>
|
||||
<pin peripheral="USART0" signal="TXD" pin_num="32" pin_signal="PIO0_1/U0_TXD/SPI0_SSEL1/CT32B0_CAP1/SCT0_OUT1"/>
|
||||
</pins>
|
||||
</function>
|
||||
</functions_list>
|
||||
</pins>
|
||||
<clocks name="Clocks" version="9.0" enabled="true" update_project_code="true">
|
||||
<generated_project_files>
|
||||
<file path="board/clock_config.c" update_enabled="true"/>
|
||||
<file path="board/clock_config.h" update_enabled="true"/>
|
||||
</generated_project_files>
|
||||
<clocks_profile>
|
||||
<processor_version>11.0.1</processor_version>
|
||||
</clocks_profile>
|
||||
<clock_configurations>
|
||||
<clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
|
||||
<description></description>
|
||||
<options/>
|
||||
<dependencies>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm0plus">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm4">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm0plus">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.power" description="Clocks initialization requires the POWER Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm4">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm0plus">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm4">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<clock_sources/>
|
||||
<clock_outputs>
|
||||
<clock_output id="ASYNCAPB_clock.outFreq" value="12 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="FRG_clock.outFreq" value="12 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="MAIN_clock.outFreq" value="12 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="System_clock.outFreq" value="12 MHz" locked="false" accuracy=""/>
|
||||
</clock_outputs>
|
||||
<clock_settings/>
|
||||
<called_from_default_init>true</called_from_default_init>
|
||||
</clock_configuration>
|
||||
</clock_configurations>
|
||||
</clocks>
|
||||
<dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
|
||||
<generated_project_files/>
|
||||
<dcdx_profile>
|
||||
<processor_version>N/A</processor_version>
|
||||
</dcdx_profile>
|
||||
<dcdx_configurations/>
|
||||
</dcdx>
|
||||
<periphs name="Peripherals" version="11.0" enabled="true" update_project_code="true">
|
||||
<generated_project_files>
|
||||
<file path="board/peripherals.c" update_enabled="true"/>
|
||||
<file path="board/peripherals.h" update_enabled="true"/>
|
||||
</generated_project_files>
|
||||
<peripherals_profile>
|
||||
<processor_version>11.0.1</processor_version>
|
||||
</peripherals_profile>
|
||||
<functional_groups>
|
||||
<functional_group name="BOARD_InitPeripherals" uuid="bf976c30-387a-4c02-956c-44a37954526e" called_from_default_init="true" id_prefix="" core="cm4">
|
||||
<description></description>
|
||||
<options/>
|
||||
<dependencies/>
|
||||
<instances>
|
||||
<instance name="NVIC" uuid="95540aad-a83e-4f89-94d4-464eb84246d4" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
|
||||
<config_set name="nvic">
|
||||
<array name="interrupt_table"/>
|
||||
<array name="interrupts"/>
|
||||
</config_set>
|
||||
</instance>
|
||||
</instances>
|
||||
</functional_group>
|
||||
</functional_groups>
|
||||
<components>
|
||||
<component name="system" uuid="cc67576e-3877-4631-9c7a-e1d9b9e83de8" type_id="system_54b53072540eeeb8f8e9343e71f28176">
|
||||
<config_set_global name="global_system_definitions">
|
||||
<setting name="user_definitions" value=""/>
|
||||
<setting name="user_includes" value=""/>
|
||||
</config_set_global>
|
||||
</component>
|
||||
<component name="generic_enet" uuid="5ffbd600-f4df-47f4-a24a-89f26ae3ed5d" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
|
||||
<config_set_global name="global_enet"/>
|
||||
</component>
|
||||
<component name="gpio_adapter_common" uuid="5c9d5317-8314-492b-a7aa-30770c852e97" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
|
||||
<config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
|
||||
</component>
|
||||
<component name="generic_uart" uuid="bec6b8dc-b0c5-4d78-abf3-d017e2ce7fb5" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
|
||||
<config_set_global name="global_uart"/>
|
||||
</component>
|
||||
<component name="msg" uuid="e18af729-56ac-47f2-8d00-92b4ba3f397c" type_id="msg_6e2baaf3b97dbeef01c0043275f9a0e7">
|
||||
<config_set_global name="global_messages"/>
|
||||
</component>
|
||||
<component name="uart_cmsis_common" uuid="479c3868-fe65-4e98-8a49-98e528e48024" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
|
||||
<config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
|
||||
</component>
|
||||
<component name="generic_can" uuid="0cb95633-444b-4c6d-aa5f-880a06665ab5" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
|
||||
<config_set_global name="global_can"/>
|
||||
</component>
|
||||
</components>
|
||||
</periphs>
|
||||
<tee name="TEE" version="4.0" enabled="false" update_project_code="true">
|
||||
<generated_project_files/>
|
||||
<tee_profile>
|
||||
<processor_version>N/A</processor_version>
|
||||
</tee_profile>
|
||||
</tee>
|
||||
</tools>
|
||||
</configuration>
|
|
@ -0,0 +1 @@
|
|||
Subproject commit 5540a4c296a16ba1fd7bbe78dec73165903fc94d
|
|
@ -0,0 +1,10 @@
|
|||
set(CMAKE_C_COMPILER arm-none-eabi-gcc)
|
||||
set(CMAKE_CXX_COMPILER arm-none-eabi-g++)
|
||||
|
||||
# Make CMake happy about those compilers
|
||||
set(CMAKE_TRY_COMPILE_TARGET_TYPE "STATIC_LIBRARY")
|
||||
|
||||
# Poor old Windows...
|
||||
if(WIN32)
|
||||
set(CMAKE_SYSTEM_NAME "Generic")
|
||||
endif()
|
|
@ -0,0 +1,46 @@
|
|||
/*
|
||||
* Copyright 2017-2018 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include "fsl_common.h"
|
||||
#include "clock_config.h"
|
||||
#include "board.h"
|
||||
#include "fsl_debug_console.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables
|
||||
******************************************************************************/
|
||||
|
||||
/* Clock rate on the CLKIN pin */
|
||||
const uint32_t ExtClockIn = BOARD_EXTCLKINRATE;
|
||||
|
||||
/*******************************************************************************
|
||||
* Code
|
||||
******************************************************************************/
|
||||
/* Initialize debug console. */
|
||||
status_t BOARD_InitDebugConsole(void)
|
||||
{
|
||||
status_t result;
|
||||
/* attach 12 MHz clock to USART0 (debug console) */
|
||||
CLOCK_AttachClk(BOARD_DEBUG_UART_CLK_ATTACH);
|
||||
RESET_PeripheralReset(BOARD_DEBUG_UART_RST);
|
||||
result = DbgConsole_Init(BOARD_DEBUG_UART_INSTANCE, BOARD_DEBUG_UART_BAUDRATE, BOARD_DEBUG_UART_TYPE,
|
||||
BOARD_DEBUG_UART_CLK_FREQ);
|
||||
assert(kStatus_Success == result);
|
||||
return result;
|
||||
}
|
||||
status_t BOARD_InitDebugConsole_Core1(void)
|
||||
{
|
||||
status_t result;
|
||||
/* attach 12 MHz clock to USART2 (debug console) */
|
||||
CLOCK_AttachClk(BOARD_DEBUG_UART_CLK_ATTACH_CORE1);
|
||||
RESET_PeripheralReset(BOARD_DEBUG_UART_RST_CORE1);
|
||||
result = DbgConsole_Init(BOARD_DEBUG_UART_INSTANCE_CORE1, BOARD_DEBUG_UART_BAUDRATE_CORE1,
|
||||
BOARD_DEBUG_UART_TYPE_CORE1, BOARD_DEBUG_UART_CLK_FREQ_CORE1);
|
||||
assert(kStatus_Success == result);
|
||||
return result;
|
||||
}
|
|
@ -0,0 +1,154 @@
|
|||
/*
|
||||
* Copyright 2017-2018 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
#ifndef _BOARD_H_
|
||||
#define _BOARD_H_
|
||||
|
||||
#include "clock_config.h"
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_gpio.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
/*! @brief The board name */
|
||||
#define BOARD_NAME "LPCXPRESSO54102"
|
||||
|
||||
#define BOARD_EXTCLKINRATE (0)
|
||||
|
||||
/*! @brief The UART to use for debug messages. */
|
||||
#define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
|
||||
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) USART0
|
||||
#define BOARD_DEBUG_UART_INSTANCE 0U
|
||||
#define BOARD_DEBUG_UART_CLK_FREQ CLOCK_GetUsartClkFreq()
|
||||
#define BOARD_DEBUG_UART_CLK_ATTACH kIRC12M_to_USART
|
||||
#define BOARD_DEBUG_UART_RST kUSART0_RST_SHIFT_RSTn
|
||||
|
||||
#define BOARD_DEBUG_UART_TYPE_CORE1 kSerialPort_Uart
|
||||
#define BOARD_DEBUG_UART_BASEADDR_CORE1 (uint32_t) USART2
|
||||
#define BOARD_DEBUG_UART_INSTANCE_CORE1 2U
|
||||
#define BOARD_DEBUG_UART_CLK_FREQ_CORE1 CLOCK_GetUsartClkFreq()
|
||||
#define BOARD_DEBUG_UART_CLK_ATTACH_CORE1 kIRC12M_to_USART
|
||||
#define BOARD_DEBUG_UART_RST_CORE1 kUSART2_RST_SHIFT_RSTn
|
||||
|
||||
#define BOARD_DEBUG_SPI_CLK_FREQ 12000000
|
||||
|
||||
#ifndef BOARD_DEBUG_UART_BAUDRATE
|
||||
#define BOARD_DEBUG_UART_BAUDRATE 115200
|
||||
#endif /* BOARD_DEBUG_UART_BAUDRATE */
|
||||
|
||||
#ifndef BOARD_DEBUG_UART_BAUDRATE_CORE1
|
||||
#define BOARD_DEBUG_UART_BAUDRATE_CORE1 115200
|
||||
#endif /* BOARD_DEBUG_UART_BAUDRATE_CORE1 */
|
||||
|
||||
#ifndef BOARD_LED_RED_GPIO
|
||||
#define BOARD_LED_RED_GPIO GPIO
|
||||
#endif
|
||||
#define BOARD_LED_RED_GPIO_PORT 0U
|
||||
#ifndef BOARD_LED_RED_GPIO_PIN
|
||||
#define BOARD_LED_RED_GPIO_PIN 29U
|
||||
#endif
|
||||
#ifndef BOARD_LED_GREEN_GPIO
|
||||
#define BOARD_LED_GREEN_GPIO GPIO
|
||||
#endif
|
||||
#define BOARD_LED_GREEN_GPIO_PORT 0U
|
||||
#ifndef BOARD_LED_GREEN_GPIO_PIN
|
||||
#define BOARD_LED_GREEN_GPIO_PIN 30U
|
||||
#endif
|
||||
#ifndef BOARD_LED_BLUE_GPIO
|
||||
#define BOARD_LED_BLUE_GPIO GPIO
|
||||
#endif
|
||||
#define BOARD_LED_BLUE_GPIO_PORT 0U
|
||||
#ifndef BOARD_LED_BLUE_GPIO_PIN
|
||||
#define BOARD_LED_BLUE_GPIO_PIN 31U
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_SW1_GPIO
|
||||
#define BOARD_SW1_GPIO GPIO
|
||||
#endif
|
||||
#define BOARD_SW1_GPIO_PORT 0U
|
||||
#ifndef BOARD_SW1_GPIO_PIN
|
||||
#define BOARD_SW1_GPIO_PIN 24U
|
||||
#endif
|
||||
#define BOARD_SW1_NAME "SW1"
|
||||
#define BOARD_SW1_IRQ PIN_INT0_IRQn
|
||||
#define BOARD_SW1_IRQ_HANDLER PIN_INT0_IRQHandler
|
||||
|
||||
#ifndef BOARD_SW2_GPIO
|
||||
#define BOARD_SW2_GPIO GPIO
|
||||
#endif
|
||||
#define BOARD_SW2_GPIO_PORT 0U
|
||||
#ifndef BOARD_SW2_GPIO_PIN
|
||||
#define BOARD_SW2_GPIO_PIN 31U
|
||||
#endif
|
||||
#define BOARD_SW2_NAME "SW2"
|
||||
#define BOARD_SW2_IRQ PIN_INT0_IRQn
|
||||
#define BOARD_SW2_IRQ_HANDLER PIN_INT0_IRQHandler
|
||||
|
||||
/* Board led color mapping */
|
||||
#define LOGIC_LED_ON 0U
|
||||
#define LOGIC_LED_OFF 1U
|
||||
|
||||
#define LED_RED_INIT(output) \
|
||||
GPIO_PinInit(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN, \
|
||||
&(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED_RED */
|
||||
#define LED_RED_ON() \
|
||||
GPIO_PortClear(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
|
||||
1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn on target LED_RED */
|
||||
#define LED_RED_OFF() \
|
||||
GPIO_PortSet(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
|
||||
1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn off target LED_RED */
|
||||
#define LED_RED_TOGGLE() \
|
||||
GPIO_PortToggle(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
|
||||
1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED_RED */
|
||||
|
||||
#define LED_GREEN_INIT(output) \
|
||||
GPIO_PinInit(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, BOARD_LED_GREEN_GPIO_PIN, \
|
||||
&(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED_GREEN */
|
||||
#define LED_GREEN_ON() \
|
||||
GPIO_PortClear(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
|
||||
1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED_GREEN */
|
||||
#define LED_GREEN_OFF() \
|
||||
GPIO_PortSet(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
|
||||
1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED_GREEN */
|
||||
#define LED_GREEN_TOGGLE() \
|
||||
GPIO_PortToggle(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
|
||||
1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED_GREEN */
|
||||
|
||||
#define LED_BLUE_INIT(output) \
|
||||
GPIO_PinInit(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN, \
|
||||
&(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED_BLUE */
|
||||
#define LED_BLUE_ON() \
|
||||
GPIO_PortClear(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
|
||||
1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn on target LED_BLUE */
|
||||
#define LED_BLUE_OFF() \
|
||||
GPIO_PortSet(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
|
||||
1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn off target LED_BLUE */
|
||||
#define LED_BLUE_TOGGLE() \
|
||||
GPIO_PortToggle(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
|
||||
1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED_BLUE */
|
||||
|
||||
/* Display. */
|
||||
#define BOARD_LCD_DC_GPIO GPIO
|
||||
#define BOARD_LCD_DC_GPIO_PORT 0U
|
||||
#define BOARD_LCD_DC_GPIO_PIN 3U
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/*******************************************************************************
|
||||
* API
|
||||
******************************************************************************/
|
||||
|
||||
status_t BOARD_InitDebugConsole(void);
|
||||
status_t BOARD_InitDebugConsole_Core1(void);
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus */
|
||||
|
||||
#endif /* _BOARD_H_ */
|
|
@ -0,0 +1,101 @@
|
|||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
/*
|
||||
* How to set up clock using clock driver functions:
|
||||
*
|
||||
* 1. Setup clock sources.
|
||||
*
|
||||
* 2. Setup voltage for the fastest of the clock outputs
|
||||
*
|
||||
* 3. Set up wait states of the flash.
|
||||
*
|
||||
* 4. Set up all dividers.
|
||||
*
|
||||
* 5. Set up all selectors to provide selected clocks.
|
||||
*/
|
||||
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Clocks v9.0
|
||||
processor: LPC54102J512
|
||||
package_id: LPC54102J512BD64
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 11.0.1
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
#include "fsl_power.h"
|
||||
#include "fsl_clock.h"
|
||||
#include "clock_config.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables
|
||||
******************************************************************************/
|
||||
/* System clock frequency. */
|
||||
extern uint32_t SystemCoreClock;
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
void BOARD_InitBootClocks(void)
|
||||
{
|
||||
BOARD_BootClockRUN();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
********************** Configuration BOARD_BootClockRUN ***********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockRUN
|
||||
called_from_default_init: true
|
||||
outputs:
|
||||
- {id: ASYNCAPB_clock.outFreq, value: 12 MHz}
|
||||
- {id: FRG_clock.outFreq, value: 12 MHz}
|
||||
- {id: MAIN_clock.outFreq, value: 12 MHz}
|
||||
- {id: System_clock.outFreq, value: 12 MHz}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockRUN configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockRUN configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockRUN(void)
|
||||
{
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Set up IRC */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_IRC_OSC); /*!< Ensure IRC OSC is on */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_IRC); /*!< Ensure IRC is on */
|
||||
CLOCK_AttachClk(kIRC12M_to_MAIN_CLK); /*!< Switch to IRC 12MHz first to ensure we can change voltage without accidentally
|
||||
being below the voltage for current speed */
|
||||
|
||||
/*!< PLL is in power_down mode */
|
||||
|
||||
POWER_SetVoltageForFreq(12000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(12000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
SYSCON->ASYNCAPBCTRL = SYSCON_ASYNCAPBCTRL_ENABLE_MASK; /*!< Enable ASYNC APB subsystem */
|
||||
Clock_SetAsyncClkDiv(1U); /*!< Set ASYNCCLKDIV divider to value 1 */
|
||||
ASYNC_SYSCON->FRGCTRL = ((ASYNC_SYSCON->FRGCTRL & ~ASYNC_SYSCON_FRGCTRL_MULT_MASK) | ASYNC_SYSCON_FRGCTRL_MULT(0U)); /*!< Set FRG MULT to value 0 */
|
||||
ASYNC_SYSCON->ASYNCAPBCLKCTRL |= ASYNC_SYSCON_ASYNCAPBCLKCTRL_FRG0_MASK; /*!< Enable FRG clock */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kIRC12M_to_MAIN_CLK); /*!< Switch MAIN_CLK to IRC12M */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
|
||||
}
|
||||
|
|
@ -0,0 +1,62 @@
|
|||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _CLOCK_CONFIG_H_
|
||||
#define _CLOCK_CONFIG_H_
|
||||
|
||||
#include "fsl_common.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
#define BOARD_XTAL0_CLK_HZ 12000000U /*!< Board xtal0 frequency in Hz */
|
||||
#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32K frequency in Hz */
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes default configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootClocks(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
********************** Configuration BOARD_BootClockRUN ***********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockRUN configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockRUN configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockRUN(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
#endif /* _CLOCK_CONFIG_H_ */
|
||||
|
|
@ -0,0 +1,93 @@
|
|||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Peripherals v11.0
|
||||
processor: LPC54102J512
|
||||
package_id: LPC54102J512BD64
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 11.0.1
|
||||
functionalGroups:
|
||||
- name: BOARD_InitPeripherals
|
||||
UUID: bf976c30-387a-4c02-956c-44a37954526e
|
||||
called_from_default_init: true
|
||||
selectedCore: cm4
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'system'
|
||||
- type_id: 'system_54b53072540eeeb8f8e9343e71f28176'
|
||||
- global_system_definitions:
|
||||
- user_definitions: ''
|
||||
- user_includes: ''
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'gpio_adapter_common'
|
||||
- type_id: 'gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6'
|
||||
- global_gpio_adapter_common:
|
||||
- quick_selection: 'default'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'uart_cmsis_common'
|
||||
- type_id: 'uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8'
|
||||
- global_USART_CMSIS_common:
|
||||
- quick_selection: 'default'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Included files
|
||||
**********************************************************************************************************************/
|
||||
#include "peripherals.h"
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitPeripherals functional group
|
||||
**********************************************************************************************************************/
|
||||
/***********************************************************************************************************************
|
||||
* NVIC initialization code
|
||||
**********************************************************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
instance:
|
||||
- name: 'NVIC'
|
||||
- type: 'nvic'
|
||||
- mode: 'general'
|
||||
- custom_name_enabled: 'false'
|
||||
- type_id: 'nvic_57b5eef3774cc60acaede6f5b8bddc67'
|
||||
- functional_group: 'BOARD_InitPeripherals'
|
||||
- peripheral: 'NVIC'
|
||||
- config_sets:
|
||||
- nvic:
|
||||
- interrupt_table: []
|
||||
- interrupts: []
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/* Empty initialization function (commented out)
|
||||
static void NVIC_init(void) {
|
||||
} */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Initialization functions
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitPeripherals(void)
|
||||
{
|
||||
/* Initialize components */
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitBootPeripherals function
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitBootPeripherals(void)
|
||||
{
|
||||
BOARD_InitPeripherals();
|
||||
}
|
|
@ -0,0 +1,33 @@
|
|||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PERIPHERALS_H_
|
||||
#define _PERIPHERALS_H_
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Included files
|
||||
**********************************************************************************************************************/
|
||||
#include "fsl_common.h"
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Initialization functions
|
||||
**********************************************************************************************************************/
|
||||
|
||||
void BOARD_InitPeripherals(void);
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitBootPeripherals function
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitBootPeripherals(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _PERIPHERALS_H_ */
|
|
@ -0,0 +1,83 @@
|
|||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Pins v11.0
|
||||
processor: LPC54102J512
|
||||
package_id: LPC54102J512BD64
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 11.0.1
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
#include "fsl_common.h"
|
||||
#include "pin_mux.h"
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBootPins
|
||||
* Description : Calls initialization functions.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitBootPins(void)
|
||||
{
|
||||
BOARD_InitPins();
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm4, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '31', peripheral: USART0, signal: RXD, pin_signal: PIO0_0/U0_RXD/SPI0_SSEL0/CT32B0_CAP0/SCT0_OUT3}
|
||||
- {pin_num: '32', peripheral: USART0, signal: TXD, pin_signal: PIO0_1/U0_TXD/SPI0_SSEL1/CT32B0_CAP1/SCT0_OUT1}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
/* Function assigned for the Cortex-M4F */
|
||||
void BOARD_InitPins(void)
|
||||
{
|
||||
/* Enables the clock for the IOCON block. 0 = Disable; 1 = Enable.: 0x01u */
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
IOCON->PIO[0][0] = ((IOCON->PIO[0][0] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT00 (pin 31) is configured as U0_RXD. */
|
||||
| IOCON_PIO_FUNC(PIO00_FUNC_ALT1)
|
||||
|
||||
/* Select Analog/Digital mode.
|
||||
* : Digital mode. */
|
||||
| IOCON_PIO_DIGIMODE(PIO00_DIGIMODE_DIGITAL));
|
||||
|
||||
IOCON->PIO[0][1] = ((IOCON->PIO[0][1] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))
|
||||
|
||||
/* Selects pin function.
|
||||
* : PORT01 (pin 32) is configured as U0_TXD. */
|
||||
| IOCON_PIO_FUNC(PIO01_FUNC_ALT1)
|
||||
|
||||
/* Select Analog/Digital mode.
|
||||
* : Digital mode. */
|
||||
| IOCON_PIO_DIGIMODE(PIO01_DIGIMODE_DIGITAL));
|
||||
}
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
|
@ -0,0 +1,50 @@
|
|||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PIN_MUX_H_
|
||||
#define _PIN_MUX_H_
|
||||
|
||||
/*!
|
||||
* @addtogroup pin_mux
|
||||
* @{
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* API
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @brief Calls initialization functions.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootPins(void);
|
||||
|
||||
#define PIO00_DIGIMODE_DIGITAL 0x01u /*!<@brief Select Analog/Digital mode.: Digital mode. */
|
||||
#define PIO00_FUNC_ALT1 0x01u /*!<@brief Selects pin function.: Alternative connection 1. */
|
||||
#define PIO01_DIGIMODE_DIGITAL 0x01u /*!<@brief Select Analog/Digital mode.: Digital mode. */
|
||||
#define PIO01_FUNC_ALT1 0x01u /*!<@brief Selects pin function.: Alternative connection 1. */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitPins(void); /* Function assigned for the Cortex-M4F */
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @}
|
||||
*/
|
||||
#endif /* _PIN_MUX_H_ */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
|
@ -0,0 +1,20 @@
|
|||
#include "board.h"
|
||||
#include "clock_config.h"
|
||||
#include "peripherals.h"
|
||||
#include "pin_mux.h"
|
||||
|
||||
#include "fsl_debug_console.h"
|
||||
|
||||
int main(void) {
|
||||
BOARD_InitBootPins();
|
||||
BOARD_BootClockRUN();
|
||||
BOARD_InitBootPeripherals();
|
||||
|
||||
BOARD_InitDebugConsole();
|
||||
|
||||
PRINTF("Hello world!!\r\n");
|
||||
|
||||
for(;;) {
|
||||
__WFI();
|
||||
}
|
||||
}
|
Loading…
Reference in New Issue