Embedded_Projects/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Kconfig: Remove all default n/no options

Browse Source 
Similar change was done by commit b4c2c151b1 ("Kconfig: Remove all
default n/no options") and again sync is required.

default n/no doesn't need to be specified. It is default option anyway.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # tegra
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Angelo Dureghello <angelo@kernel-space.org>
This commit is contained in:
Michal Simek 2023-10-25 09:25:37 +02:00 committed by Tom Rini
parent 54024c8021
commit 18370f1497
21 changed files with 0 additions and 29 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/mach-imx/mxs/Kconfig
View File

@ -54,7 +54,6 @@ config SYS_SOC
config SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT config SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT
bool "Force minimal current draw from VDD5V by MX28 PMU" bool "Force minimal current draw from VDD5V by MX28 PMU"
default n
help help
After setting this option, the current drawn from VDD5V After setting this option, the current drawn from VDD5V
by the PMU is reduced to zero - the DCDC_BATT is used as by the PMU is reduced to zero - the DCDC_BATT is used as
@ -62,7 +61,6 @@ config SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT
config SPL_MXS_PMU_DISABLE_BATT_CHARGE config SPL_MXS_PMU_DISABLE_BATT_CHARGE
bool "Disable Battery Charging in MX28 PMU" bool "Disable Battery Charging in MX28 PMU"
default n
config SPL_MXS_PMU_ENABLE_4P2_LINEAR_REGULATOR config SPL_MXS_PMU_ENABLE_4P2_LINEAR_REGULATOR
bool "Enable the 4P2 linear regulator in MX28 PMU" bool "Enable the 4P2 linear regulator in MX28 PMU"

1
arch/arm/mach-rockchip/Kconfig
View File

@ -450,7 +450,6 @@ config ROCKCHIP_BOOT_MODE_REG
config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON
bool "Disable device boot on power plug-in" bool "Disable device boot on power plug-in"
depends on PMIC_RK8XX depends on PMIC_RK8XX
default n
---help--- ---help---
Say Y here to prevent the device from booting up because of a plug-in Say Y here to prevent the device from booting up because of a plug-in
event. When set, the device will boot briefly to determine why it was event. When set, the device will boot briefly to determine why it was

1
arch/arm/mach-snapdragon/Kconfig
View File

@ -14,7 +14,6 @@ config SPL_SYS_MALLOC_F_LEN
config SDM845 config SDM845
bool "Qualcomm Snapdragon 845 SoC" bool "Qualcomm Snapdragon 845 SoC"
default n
select LINUX_KERNEL_IMAGE_HEADER select LINUX_KERNEL_IMAGE_HEADER
config LNX_KRNL_IMG_TEXT_OFFSET_BASE config LNX_KRNL_IMG_TEXT_OFFSET_BASE

1
arch/arm/mach-sunxi/Kconfig
View File

@ -811,7 +811,6 @@ config AXP_GPIO
config AXP_DISABLE_BOOT_ON_POWERON config AXP_DISABLE_BOOT_ON_POWERON
bool "Disable device boot on power plug-in" bool "Disable device boot on power plug-in"
depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
default n
---help--- ---help---
Say Y here to prevent the device from booting up because of a plug-in Say Y here to prevent the device from booting up because of a plug-in
event. When set, the device will boot into the SPL briefly to event. When set, the device will boot into the SPL briefly to

1
arch/arm/mach-tegra/Kconfig
View File

@ -18,7 +18,6 @@ config TEGRA_CLKRST
config TEGRA_CRYPTO config TEGRA_CRYPTO
bool "Tegra AES128 crypto module" bool "Tegra AES128 crypto module"
select AES select AES
default n
config TEGRA_GP_PADCTRL config TEGRA_GP_PADCTRL
bool bool

1
arch/m68k/Kconfig
View File

@ -200,7 +200,6 @@ source "board/sysam/stmark2/Kconfig"
config M68K_QEMU config M68K_QEMU
bool "Build with workarounds for incomplete QEMU emulation" bool "Build with workarounds for incomplete QEMU emulation"
default n
help help
QEMU 8.x currently does not implement RAMBAR accesses and QEMU 8.x currently does not implement RAMBAR accesses and
DMA timers. Enable this option for U-Boot CI purposes only DMA timers. Enable this option for U-Boot CI purposes only

1
arch/riscv/Kconfig
View File

@ -68,7 +68,6 @@ config SPL_SYS_DCACHE_OFF
config SPL_ZERO_MEM_BEFORE_USE config SPL_ZERO_MEM_BEFORE_USE
bool "Zero memory before use" bool "Zero memory before use"
depends on SPL depends on SPL
default n
help help
Zero stack/GD/malloc area in SPL before using them, this is needed for Zero stack/GD/malloc area in SPL before using them, this is needed for
Sifive core devices that uses L2 cache to store SPL. Sifive core devices that uses L2 cache to store SPL.

2
board/asus/grouper/Kconfig
View File

@ -12,11 +12,9 @@ config SYS_CONFIG_NAME
config GROUPER_TPS65911 config GROUPER_TPS65911
bool "Enable support TI TPS65911 PMIC" bool "Enable support TI TPS65911 PMIC"
select CMD_POWEROFF select CMD_POWEROFF
default n
config GROUPER_MAX77663 config GROUPER_MAX77663
bool "Enable support MAXIM MAX77663 PMIC" bool "Enable support MAXIM MAX77663 PMIC"
select CMD_POWEROFF select CMD_POWEROFF
default n
endif endif

1
board/asus/transformer-t30/Kconfig
View File

@ -14,7 +14,6 @@ config TRANSFORMER_SPI_BOOT
select TEGRA20_SLINK select TEGRA20_SLINK
select DM_SPI_FLASH select DM_SPI_FLASH
select SPI_FLASH_WINBOND select SPI_FLASH_WINBOND
default n
help help
Tegra 3 based Transformers with Windows RT have core Tegra 3 based Transformers with Windows RT have core
boot sequence (BCT and EBT) on separate SPI FLASH boot sequence (BCT and EBT) on separate SPI FLASH

3
board/keymile/Kconfig
View File

@ -125,7 +125,6 @@ config SYS_IVM_EEPROM_PAGE_LEN
config PG_WCOM_UBOOT_UPDATE_SUPPORTED config PG_WCOM_UBOOT_UPDATE_SUPPORTED
bool "Enable U-Boot Field Fail-Safe Update Functionality" bool "Enable U-Boot Field Fail-Safe Update Functionality"
select EVENT select EVENT
default n
help help
Indicates that field fail-safe u-boot update is supported. Indicates that field fail-safe u-boot update is supported.
This functionality works only for designs that are booting This functionality works only for designs that are booting
@ -133,7 +132,6 @@ config PG_WCOM_UBOOT_UPDATE_SUPPORTED
config PG_WCOM_UBOOT_BOOTPACKAGE config PG_WCOM_UBOOT_BOOTPACKAGE
bool "U-Boot Is Part Of Factory Boot-Package Image" bool "U-Boot Is Part Of Factory Boot-Package Image"
default n
help help
Indicates that u-boot will be a part of the factory programmed Indicates that u-boot will be a part of the factory programmed
boot-package image. boot-package image.
@ -149,7 +147,6 @@ config PG_WCOM_UBOOT_UPDATE_TEXT_BASE
config PG_WCOM_UBOOT_UPDATE config PG_WCOM_UBOOT_UPDATE
bool "U-Boot Is Part Of Factory Boot-Package Image" bool "U-Boot Is Part Of Factory Boot-Package Image"
default n
help help
Indicates that u-boot will be a part of the embedded software and Indicates that u-boot will be a part of the embedded software and
programmed at field. programmed at field.

2
board/lg/x3-t30/Kconfig
View File

@ -11,14 +11,12 @@ config SYS_CONFIG_NAME
config DEVICE_P880 config DEVICE_P880
bool "Enable support for LG Optimus 4X HD" bool "Enable support for LG Optimus 4X HD"
default n
help help
LG Optimus 4X HD derives from x3 board but has slight LG Optimus 4X HD derives from x3 board but has slight
differences. differences.
config DEVICE_P895 config DEVICE_P895
bool "Enable support for LG Optimus Vu" bool "Enable support for LG Optimus Vu"
default n
help help
LG Optimus Vu derives from x3 board but has slight LG Optimus Vu derives from x3 board but has slight
differences. differences.

3
cmd/Kconfig
View File

@ -246,7 +246,6 @@ config CMD_BOOTM_PRE_LOAD
bool "enable pre-load on bootm" bool "enable pre-load on bootm"
depends on CMD_BOOTM depends on CMD_BOOTM
depends on IMAGE_PRE_LOAD depends on IMAGE_PRE_LOAD
default n
help help
Enable support of stage pre-load for the bootm command. Enable support of stage pre-load for the bootm command.
This stage allow to check or modify the image provided This stage allow to check or modify the image provided
@ -2360,7 +2359,6 @@ config CMD_VIDCONSOLE
config CMD_SELECT_FONT config CMD_SELECT_FONT
bool "select font size" bool "select font size"
depends on VIDEO depends on VIDEO
default n
help help
Enabling this will provide 'font' command. Enabling this will provide 'font' command.
Allows font selection at runtime. Allows font selection at runtime.
@ -2880,7 +2878,6 @@ config CMD_UBIFS
config MMC_SPEED_MODE_SET config MMC_SPEED_MODE_SET
bool "set speed mode using mmc command" bool "set speed mode using mmc command"
depends on CMD_MMC depends on CMD_MMC
default n
help help
Enable setting speed mode using mmc rescan and mmc dev commands. Enable setting speed mode using mmc rescan and mmc dev commands.
The speed mode is provided as the last argument in these commands The speed mode is provided as the last argument in these commands

1
drivers/crypto/fsl/Kconfig
View File

@ -77,7 +77,6 @@ endif
config FSL_DCP_RNG config FSL_DCP_RNG
bool "Enable Random Number Generator support" bool "Enable Random Number Generator support"
depends on DM_RNG depends on DM_RNG
default n
help help
Enable support for the hardware based random number generator Enable support for the hardware based random number generator
module of the DCP. It uses the True Random Number Generator (TRNG) module of the DCP. It uses the True Random Number Generator (TRNG)

1
drivers/memory/Kconfig
View File

@ -61,7 +61,6 @@ config TI_GPMC
if TI_GPMC if TI_GPMC
config TI_GPMC_DEBUG config TI_GPMC_DEBUG
bool "Debug Texas Instruments GPMC timings" bool "Debug Texas Instruments GPMC timings"
default n
help help
Enable this to print GPMC timings before and after the GPMC registers Enable this to print GPMC timings before and after the GPMC registers
are programmed. This should not be left enabled on production systems. are programmed. This should not be left enabled on production systems.

1
drivers/misc/Kconfig
View File

@ -375,7 +375,6 @@ config SPL_MXC_OCOTP
config NPCM_OTP config NPCM_OTP
bool "Nnvoton NPCM BMC On-Chip OTP Memory Support" bool "Nnvoton NPCM BMC On-Chip OTP Memory Support"
depends on (ARM && ARCH_NPCM) depends on (ARM && ARCH_NPCM)
default n
help help
Support NPCM BMC OTP memory (fuse). Support NPCM BMC OTP memory (fuse).
To compile this driver as a module, choose M here: the module To compile this driver as a module, choose M here: the module

1
drivers/mtd/nand/raw/Kconfig
View File

@ -614,7 +614,6 @@ config ROCKCHIP_NAND
config ROCKCHIP_NAND_SKIP_BBTSCAN config ROCKCHIP_NAND_SKIP_BBTSCAN
bool "Skip the automatic BBT scan with Rockchip NAND controllers" bool "Skip the automatic BBT scan with Rockchip NAND controllers"
depends on ROCKCHIP_NAND depends on ROCKCHIP_NAND
default n
help help
Skip the automatic BBT scan with the NAND_SKIP_BBTSCAN Skip the automatic BBT scan with the NAND_SKIP_BBTSCAN
option when data content is not in MTD format or option when data content is not in MTD format or

1
drivers/mtd/spi/Kconfig
View File

@ -107,7 +107,6 @@ config SPI_FLASH_SMART_HWCAPS
config SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT config SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT
bool "Command extension type is INVERT for Software Reset on boot" bool "Command extension type is INVERT for Software Reset on boot"
default n
help help
Because of SFDP information can not be get before boot. Because of SFDP information can not be get before boot.
So define command extension type is INVERT when Software Reset on boot only. So define command extension type is INVERT when Software Reset on boot only.

1
drivers/sm/Kconfig
View File

@ -4,6 +4,5 @@ config SM
config MESON_SM config MESON_SM
bool "Amlogic Secure Monitor driver" bool "Amlogic Secure Monitor driver"
select SM select SM
default n
help help
Say y here to enable the Amlogic secure monitor driver. Say y here to enable the Amlogic secure monitor driver.

1
drivers/spi/Kconfig
View File

@ -460,7 +460,6 @@ config SANDBOX_SPI_MAX_CS
config SPI_ASPEED_SMC config SPI_ASPEED_SMC
bool "ASPEED SPI flash controller driver" bool "ASPEED SPI flash controller driver"
depends on DM_SPI && SPI_MEM depends on DM_SPI && SPI_MEM
default n
help help
Enable ASPEED SPI flash controller driver for AST2500 Enable ASPEED SPI flash controller driver for AST2500
and AST2600 SoCs. and AST2600 SoCs.

2
drivers/usb/host/Kconfig
View File

@ -231,7 +231,6 @@ config USB_EHCI_MXS
config USB_EHCI_NPCM config USB_EHCI_NPCM
bool "Support for Nuvoton NPCM on-chip EHCI USB controller" bool "Support for Nuvoton NPCM on-chip EHCI USB controller"
depends on ARCH_NPCM depends on ARCH_NPCM
default n
---help--- ---help---
Enables support for the on-chip EHCI controller on Enables support for the on-chip EHCI controller on
Nuvoton NPCM chips. Nuvoton NPCM chips.
@ -368,7 +367,6 @@ config USB_OHCI_DA8XX
config USB_OHCI_NPCM config USB_OHCI_NPCM
bool "Support for Nuvoton NPCM on-chip OHCI USB controller" bool "Support for Nuvoton NPCM on-chip OHCI USB controller"
depends on ARCH_NPCM depends on ARCH_NPCM
default n
---help--- ---help---
Enables support for the on-chip OHCI controller on Enables support for the on-chip OHCI controller on
Nuvoton NPCM chips. Nuvoton NPCM chips.

1
fs/ubifs/Kconfig
View File

@ -8,7 +8,6 @@ config UBIFS_SILENCE_MSG
config UBIFS_SILENCE_DEBUG_DUMP config UBIFS_SILENCE_DEBUG_DUMP
bool "UBIFS silence debug dumps" bool "UBIFS silence debug dumps"
default y if UBIFS_SILENCE_MSG default y if UBIFS_SILENCE_MSG
default n
help help
Make the debug dumps from UBIFS stop printing. Make the debug dumps from UBIFS stop printing.
This decreases size of U-Boot binary. This decreases size of U-Boot binary.