LDR format files are used primarily by Analog Devices processors but may
be of interest to other vendors. Previously support existed for this
format as part of the U-Boot build, but it has been unmaintained and
unused for a long time. In preparation for adding support for modern ADI
processors that use LDR, modernize the LDR support:
- Introduce CONFIG_LDR_CPU as the CPU string recognized by the LDR tool
may not be the same as CONFIG_CPU
- Add an SPL target that repackages u-boot-spl inside an LDR file
An almost identical target for packaging u-boot into an LDR file already
exists and did not need to be created.
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
With configs such as "am64x_evm_a53" or "imx8mp_venice" which list
multiple device trees to build we get a warning such as:
scripts/Makefile.spl:578: target 'spl/dts/freescale/' given more than once in the same rule
If we sort this list first the warning goes away.
Tested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
When a file is created in the linux and corresponding file permission
is set, if the file needs to be modified in uboot during the startup
process, the modified file permission will be reset to 755. Therefore,
when the ext4fs_write() function is called, if the file already exists,
the file permission of the new file is equal to the file permission of
the existing file.
Currently if ${bootfile} is unset and sysboot is invoked with no
filename specified then U-Boot will crash will a null-pointer
dereference. Add the missing check and a matching error print.
Fixes: 993c912d30 ("cmd: sysboot: Create a sysboot command dedicated file")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The implementation of map_range() creates the requested mapping by
walking the page tables, iterating over multiple PTEs and/or descending
into existing table mappings as needed. When doing so, it assumes any
pre-existing valid PTE to be a table mapping. This assumption is wrong
if the platform code attempts to successively map two overlapping ranges
where the latter intersects a block mapping created for the former.
As a result, map_range() treats the existing block mapping as a table
mapping and descends into it i.e. starts interpreting the
previously-mapped range as an array of PTEs, writing to them and
potentially even descending further (extra fun with MMIO ranges!).
Instead, pass any valid non-table mapping to split_block(), which
ensures that it actually was a block mapping (calls panic() otherwise)
before splitting it.
Fixes: 41e2787f5e ("arm64: Reduce add_map() complexity")
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Verdin AM62
Reviewed-by: Marc Zyngier <maz@kernel.org>
Add instructions to build U-Boot for the Milk-V Mars board
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The usage of common.h is deprecated. Remove it from board files.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The differences between the Milk-V Mars board and the VisionFive 2 board
are small enough that we can support both using the same U-Boot build.
* The model and compatible property are taken from proposed Linux patches.
* The EEPROM is atmel,24c02 according to the vendor U-Boot.
* The second Ethernet port is not available.
usb@10100000 does not exist in U-Boot yet. So we don't have to reflect
differences in usage here.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Set environment variable fdtfile to the correct value for the Milk-V Mars
board.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Export a function get_product_id_from_eeprom() to read the product ID.
This value can be used for fixing up the device-tree on JH7110 based
products.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Currently in set_fdtfile() we set the value of environment variable fdtfile
unconditionally. The implies that a value in the environment will be
ignored.
With the patch environment variable fdtfile will only be set if it does not
yet exist. This requires that CONFIG_DEFAULT_FDT_FILE is not set.
Now the user can either set and save fdtfile interactively or in the U-Boot
configuration to overrule the device-tree name chosen based on the
hardware in set_fdtfile().
Reported-by: E Shattow <lucent@gmail.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
When virtio_init() gets called from board_init() PCI isn't ready. Thus,
virtio-over-PCI (e.g. network interfaces) devices can't be detected and
used without additional `virtio scan` scan in the shell or a script.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
A new property has been added, with an extensive rationale at [1], that
can be used in place of "riscv,isa" to indicate what extensions are
supported by a given platform that is a list of strings rather than a
single string. There are some differences between the new property,
"riscv,isa-extensions" and the incumbent "riscv,isa" - chief among them
for the sake of parsing being the list of strings, as opposed to a
string. Another advantage is strictly defined meanings for each string
in a dt-binding, rather than deriving meaning from RVI standards. This
will likely to some divergence over time, but U-Boot's current use of
extension detection is very limited - there are just four callsites of
supports_extension() in mainline U-Boot.
These checks are limited to two checks for FPU support and two checks
for "s" and "u". "s" and "u" are not supported by the new property, but
they were also not permitted in "riscv,isa". These checks are only
meaningful (or run) in M-Mode, in which case supports_extension() does
not parse the devicetree anyway.
Add support for the new property in U-Boot, prioritising it, before
falling back to the, now deprecated, "riscv,isa" property if it is not
present.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
cpu_get_desc() for the RISC-V CPU currently reads "riscv,isa" to get
the description, but it is no longer a required property and cannot be
assummed to always be present, as the new "riscv,isa-extensions" and
"riscv,isa-base" properties may be present instead.
On RISC-V, cpu_get_desc() has two main uses - firstly providing an
informational name for the CPU for smbios or at boot with
DISPLAY_CPUINFO etc and secondly it forms the basis of ISA extension
detection in supports_extension() as it returns (a portion of) an ISA
string.
cpu_get_desc() returns a string, which aligned with "riscv,isa" but
the new property is a list of strings. Rather than add support for
the list of strings property, which would require creating an isa
string from "riscv,isa-extensions", modify the RISC-V CPU's
implementaion of cpu_get_desc() return the first compatible as the
cpu description instead. This may be fine for the informational cases,
but it would break extension dtection, given supports_extension()
expects cpu_get_desc() to return an ISA string.
Call dev_read_string() directly in supports_extension() to get the
contents of "riscv,isa" so that extension detection remains functional.
As a knock-on affect of this change, extension detection is no longer
broken for long ISA strings. Previously if the ISA string exceeded the
32 element array that supports_extension() passed to cpu_get_desc(),
it would return ENOSPC and no extensions would be detected.
This bug probably had no impact as U-Boot does not currently do anything
meaningful with the results of supports_extension() and most SoCs
supported by U-Boot don't have anywhere near that complex of an ISA
string. The QEMU virt machine's CPUs do however, so extension detection
doesn't work there.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add configs related to sdhci and mmc for Sophgo Milk-V Duo board
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add dcache operations invalidate_dcache_range and flush_dcache_range for
cv1800b.
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add Sophgo cv1800b SoC to support RISC-V arch.
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
When debugging, it is useful to have a backtrace to find
out what is in the call stack as the previous function (RA)
may not have been the culprit.
Since this adds size to the build, do not add it by default
and avoid putting it in the SPL build if not needed.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Tested-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Documentation:
* improve description of FAT partition name generation
* add missing :: in doc/usage/cmd/itest.rst
UEFI:
* fix address mode for __efi_runtime_start/stop,
__efi_runtime_rel_start/stop
* fix size of variable attribute constants
* enable booting via EFI boot manager by default
* correct the sequence of the EFI boot methods
* correct finding the default EFI binary
* don't delete variable from memory if update failed
* fix append write behavior to non-existent variable
* Use binman for testing capsule updates on the sandbox
* Consider capsule test files in .gitignore and make clean
-----BEGIN PGP SIGNATURE-----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=wa1H
-----END PGP SIGNATURE-----
Merge tag 'efi-2024-07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2024-07-rc1
Documentation:
* improve description of FAT partition name generation
* add missing :: in doc/usage/cmd/itest.rst
UEFI:
* fix address mode for __efi_runtime_start/stop,
__efi_runtime_rel_start/stop
* fix size of variable attribute constants
* enable booting via EFI boot manager by default
* correct the sequence of the EFI boot methods
* correct finding the default EFI binary
* don't delete variable from memory if update failed
* fix append write behavior to non-existent variable
* Use binman for testing capsule updates on the sandbox
* Consider capsule test files in .gitignore and make clean
A symbol defined in a linker script (e.g. __efi_runtime_rel_start = .;)
is only a symbol, not a variable and should not be dereferenced.
The common practice is either define it as
extern uint32_t __efi_runtime_rel_start or
extern char __efi_runtime_rel_start[] and access it as
&__efi_runtime_rel_start or __efi_runtime_rel_start respectively.
So let's access it properly since we define it as an array
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
A symbol defined in a linker script (e.g. __efi_runtime_start = .;) is
only a symbol, not a variable and should not be dereferenced.
The common practice is either define it as
extern uint32_t __efi_runtime_start or
extern char __efi_runtime_start[] and access it as
&__efi_runtime_start or __efi_runtime_start respectively.
So let's access it properly since we define it as an array
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
* The sandbox must not use an arbitrary file name bootsbox.efi but the
file name matching the host architecture to properly boot the respective
file. We already have an include which provides a macro with the name of
the EFI binary. Use it.
* The path to the EFI binary should be absolute.
* The path and the file name must be capitalized to conform to the UEFI
specification. This is important when reading from case sensitive
file systems.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
efi_default_filename.h requires HOST_ARCH to be defined. Up to now we
defined it via a CFLAGS. This does not scale. Add the symbol to
version_autogenerated.h instead.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
If UEFI is enabled in U-Boot, we want it to conform to the UEFI
specification. This requires enabling the boot manager boot method.
Reported-by: E Shattow <lucent@gmail.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The default sequence of boot methods is determined by alphabetical sorting
during linkage.
* efi_mgr must run before efi to be UEFI compliant
* pxe should run as last resort
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Our efi_var_mem_xxx() functions don't have a replace variant. Instead we
add a new variable and delete the old instance when trying to replace a
variable. Currently we delete the old version without checking the new
one got added
Signed-off-by: Ilias Apalodimas <apalos@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
We don't yet support EFI_VARIABLE_ENHANCED_AUTHENTICATED_ACCESS for file
based variables, but we should pass it to TEE based variable stores.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
GetVariable() and SetVariable() only accept a 32bit value for attributes.
It makes not sense to define EFI_VARIABLE_READ_ONLY as unsigned long.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
GetVariable() and SetVariable() use an uint32_t value for attributes.
The UEFI specification defines the related constants as 32bit.
Add the missing EFI_VARIABLE_ENHANCED_AUTHENTICATED_ACCESS constant.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Current "variables" efi_selftest result is inconsistent
between the U-Boot file storage and the tee-based StandaloneMM
RPMB secure storage.
U-Boot file storage implementation does not accept SetVariale
call to non-existent variable with EFI_VARIABLE_APPEND_WRITE,
it return EFI_NOT_FOUND.
However it is accepted and new variable is created in EDK II
StandaloneMM implementation if valid data and size are specified.
If data size is 0, EFI_SUCCESS is returned.
Since UEFI specification does not clearly describe the behavior
of the append write to non-existent variable, let's update
the U-Boot file storage implementation to get aligned with
the EDK II reference implementation.
Signed-off-by: Masahisa Kojima <kojima.masahisa@socionext.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
List all prefix currently used for generating FAT partition names.
Describe which device class uses which prefix.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
A certain set of capsule files are now generated as part of the
sandbox build. Add these files to the CLEAN_FILES list for deletion on
invoking any of the cleanup targets.
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canoncal.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The sandbox platform build now generates a set of capsules. Put the
related files generated into gitignore.
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Currently, all the capsules for the sandbox platform are generated at
the time of running the capsule tests. To showcase generation of
capsules through binman, generate all raw(non FIT payload) capsules
needed for the sandbox platform as part of the build. This acts as an
illustrative example for generating capsules as part of a platform's
build.
Make corresponding change in the capsule test's configuration to get
these capsules from the build directory.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The capsule update testing is carried out only on the sandbox and
sandbox_flattree variants. Remove the capsule update related configs
from the other sandbox variants. This ensures that the capsule files
are generated only on variants which are used for the feature's
testing.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/20228
- Convert imx8mp-beacon and verdin-imx8mm/verdin-imx8mp to OF_UPSTREAM.
- Enable PCIe NVMe support on imx8mp_beacon.
- Fix Ethernet and board detection on mx6cuboxi.
- Fix signature_block_hdr struct fields.
- Fix imx9_probe_mu prototype and make it to get called in
EVT_DM_POST_INIT_R.
- Test whether ethernet node is enabled before reading MAC EEPROM on
DHSOM SoMs.
- Ethernet, i2c, and USB support are now enabled by default
- The clock driver gets some bug fixes and cleanup
- Invalid FDTs are now properly detected in board_fdt_blob_setup().
- The pinctrl driver gains preparatory support for per-pin function
muxes.
- Support is added for two generations of Qualcomm HighSpeed USB PHY
- A power domain driver is added for the Globall Distributed Switch
Controllers on the GCC hardware block.
- SDM845 gains USB host mode support.
- OF_LIVE is enabled by default for Qualcomm platforms
- Some U-Boot devicetree compatibility fixups are added during init to
improve compatbility with upstream DT.
According to the documentation (for example NXP's AN13994 on encrypted
boot on AHAB-enabled devices), the format of the signature block is:
+--------------+--------------+--------------+-------------+
| Tag | Length - msb | Length - lsb | Version |
+--------------+--------------+--------------+-------------+
| SRK Table offset | Certificate offset |
+-----------------------------+----------------------------+
| Blob offset | Signature offset |
+-----------------------------+----------------------------+
There is no runtime error in the current u-boot code. The only user of
struct signature_block_hdr is the "get_container_size" function in the
"arch/arm/mach-imx/image-container.c" file, and it's only using the very
first fields of the struct (which are in the correct position) and thus
there is no runtime failure.
On the other hand, extending the code to get the data encryption key
blob offset on the signature header gives a wrong value as the field is
in the wrong order.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Move verdin-imx8mm and verdin-imx8mp to OF_UPSTREAM:
- handle the fact that dtbs now have a 'freescale/' prefix
- imply OF_UPSTREAM
- remove redundant files from arch/arm/dts leaving only the
*-u-boot.dtsi files
- update MAINTAINERS files
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
This event callback imx9_probe_mu needs to be called in board_r
as well, because many ELE APIs depending on this MU probed
Signed-off-by: Ye Li <ye.li@nxp.com>
The i.MX6 Cubox-i and HummingBoards can have different PHYs at varying
addresses. U-Boot needs to auto-detect which phy is actually present,
and at which address it is responding.
Auto-detection from multiple phy nodes specified in device-tree does not
currently work correct. As a work-around merge all three possible phys
into one node with the special address 0xffffffff which indicates to the
generic phy driver to probe all addresses.
Signed-off-by: Josua Mayer <josua@solid-run.com>
[fabio: Added the changes to imx6qdl-sr-som-u-boot.dtsi.]
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Christian Gmeiner <cgmeiner@igalia.com>
Tested-by: Christian Gmeiner <cgmeiner@igalia.com>
