Commit Graph

142 Commits

Author SHA1 Message Date
Greg Malysa
bcdd02328e build: Revive and update LDR format support
LDR format files are used primarily by Analog Devices processors but may
be of interest to other vendors. Previously support existed for this
format as part of the U-Boot build, but it has been unmaintained and
unused for a long time. In preparation for adding support for modern ADI
processors that use LDR, modernize the LDR support:

- Introduce CONFIG_LDR_CPU as the CPU string recognized by the LDR tool
  may not be the same as CONFIG_CPU
- Add an SPL target that repackages u-boot-spl inside an LDR file

An almost identical target for packaging u-boot into an LDR file already
exists and did not need to be created.

Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
2024-04-10 09:34:53 -06:00
Tom Rini
e8ff287595 scripts/Makefile.spl: Use 'sort' in SHRUNK_ARCH_DTB rule
With configs such as "am64x_evm_a53" or "imx8mp_venice" which list
multiple device trees to build we get a warning such as:
scripts/Makefile.spl:578: target 'spl/dts/freescale/' given more than once in the same rule

If we sort this list first the warning goes away.

Tested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-04-10 09:34:53 -06:00
Bryan Brattlof
bdbbf1d7b5 Makefile: remove hardcoded device tree source directory
Some boards that choose to utilize the OF_UPSTREAM directory for their
device tree files will need to specify that directory instead of the
traditional arch/$(ARCH)/dts/* path.

Include the correct path to the board's dtbs depending on if OF_UPSTREAM
is selected or not.

Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Fabio Estevam <festevam@gmail.com>
2024-03-04 09:01:27 -05:00
Simon Glass
0b2e47be2c sandbox: Correct SPL condition for building devicetree
With sandbox, CONFIG_SANDBOX is y so the current rule ends up building
the devicetree for only those SPL builds where it is unwanted.

Correct the condition. This allows sandbox_vpl to produce a
u-boot-vpl.dtb file.

Fixes: e7fb789612 ("sandbox: Remove OF_HOSTFILE")

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-12-31 07:21:02 -07:00
Nishanth Menon
a94a4071d4 tree-wide: Replace http:// link with https:// link for ti.com
Replace instances of http://www.ti.com with https://www.ti.com

Signed-off-by: Nishanth Menon <nm@ti.com>
2023-11-10 11:01:50 -05:00
Tom Rini
521ca0fa78 Makefile: Allow for board directories to not have a Makefile
It is entirely possible at this point to have platforms in U-Boot that
do not have board-specific C code (just Kconfig or environment) and so
make it optional to have to descend in to and then build in the board
directory.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-09 15:24:31 -04:00
Roger Quadros
3a82cd26ee scripts: Makefile.spl: Enable memory drivers to be built for SPL
Introduce CONFIG_SPL_MEMORY to allow Memory drivers to
be built for SPL.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-26 15:21:11 -04:00
Simon Glass
a55014d09b Makefile: Allow LTO to be disabled for a build
LTO (Link-Time Optimisation) is an very useful feature which can
significantly reduce the size of U-Boot binaries. So far it has been
made available for selected ARM boards and sandbox.

However, incremental builds are much slower when LTO is used. For example,
an incremental build of sandbox takes 2.1 seconds on my machine, but 6.7
seconds with LTO enabled.

Add a NO_LTO parameter to the build, similar to NO_SDL, so it can be
disabled during development if needed, for faster builds.

Add some documentation about LTO while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-02 16:20:11 -04:00
Simon Glass
c252fa5cdb Makefile: Correct the rule removing old of-platdata files
This makes use of makefile variables that don't exist anymore. Fix it and
also remove the object files in that directory.

Also add FORCE as a dependency as required by the if_changed macro.

Fixes 354d232463 ("Makefile: Remove old of-platdata files before regenerating")
Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-10 13:38:29 -04:00
Tom Rini
24ec3dea4b arm: samsung: Migrate a number of symbols to Kconfig
- In a number of cases, use CONFIG_ARCH_EXYNOS[45] rather than
  CONFIG_EXYNOS[45]
- In other cases, test for CONFIG_ARCH_EXYNOS or CONFIG_ARCH_S5PC1XX
- Migrate specific SoC CONFIG values to Kconfig
- Use CONFIG_TARGET_x rather than CONFIG_x
- Migrate other CONFIG_EXYNOS_x symbols to Kconfig
- Reference CONFIG_EXYNOS_RELOCATE_CODE_BASE directly as EXYNOS_RELOCATE_CODE_BASE
- Rename CONFIG_S5P_PA_SYSRAM to CONFIG_SMP_PEN_ADDR to match the rest
  of U-Boot usage.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:04:37 -04:00
Tom Rini
ca8a329a1b Convert CONFIG_SPL_PAD_TO et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_PAD_TO
   CONFIG_SPL_MAX_SIZE
   CONFIG_TPL_PAD_TO
   CONFIG_TPL_MAX_SIZE

Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the
existing places.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:06 -04:00
Simon Glass
f86ca5ad8f Introduce Verifying Program Loader (VPL)
Add support for VPL, a new phase of U-Boot. This runs after TPL. It is
responsible for selecting which SPL binary to run, based on a
verified-boot process.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-05-02 09:58:13 -04:00
Simon Glass
b550853b7d test: Tidy up test building with SPL
We can in principle add tests to any SPL build, e.g. TPL or VPL. Update
the build rules to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-05-02 09:58:13 -04:00
Samuel Holland
a0ca51f70b sunxi: Support building a SPL as a TOC0 image
Now that mkimage can generate TOC0 images, and the SPL can interpret
them, hook up the build infrastructure so the user can choose which
image type to build. Since the absolute load address is stored in the
TOC0 header, that information must be passed to mkimage.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-04 23:24:17 +01:00
Icenowy Zheng
8c621f4c3b sunxi: specify architecture when generating SPL boot image
As mkimage -T sunxi_egon now gains support for -A parameter, specify the
architecture when generating SPL boot image for sunxi.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-04 23:24:17 +01:00
Simon Glass
19a91f2464 Create a new boot/ directory
Quite a lot of the code in common/relates to booting and images. Before
adding more it seems like a good time to move the code into its own
directory.

Most files with 'boot' or 'image' in them are moved, except:

- autoboot.c which relates to U-Boot automatically running a script
- bootstage.c which relates to U-Boot timing

Drop the removal of boot* files from the output directory, since this
interfers with the symlinks created by tools and there does not appear
to be any such file from my brief testing.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Artem Lapkin <email2tema@gmail.com>
Tested-by: Artem Lapkin <email2tema@gmail.com>
2021-11-11 19:01:56 -05:00
Ilias Apalodimas
e7fb789612 sandbox: Remove OF_HOSTFILE
OF_HOSTFILE is used on sandbox configs only.  Although it's pretty
unique and not causing any confusions,  we are better of having simpler
config options for the DTB.

So let's replace that with the existing OF_BOARD.  U-Boot would then
have only three config options for the DTB origin.
- OF_SEPARATE, build separately from U-Boot
- OF_BOARD, board specific way of providing the DTB
- OF_EMBED embedded in the u-boot binary(should not be used in production

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-27 16:38:26 -04:00
Simon Glass
f99cbe4e86 fdt: Update Makefile rules with the new OF_REAL Kconfig
Simplify some of the Makefile rules using this Kconfig.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Simon Glass
5ed16a9511 net: Rename SPL_NET_SUPPORT to SPL_NET
Rename this option so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04 12:48:53 -04:00
Patrick Delaunay
ff7852d544 build: remove the variable NM in gen_ll_addressable_symbols.sh
With LTO activated, the buildman tools failed with an error on my
configuration (Ubuntu 20.04, stm32mp15_trusted_defconfig) with the error:

../arm-linux-gnueabi/bin/nm:
	scripts/gen_ll_addressable_symbols.sh: file format not recognized

It seems the shell variable initialization NM=$(NM) is not correctly
interpreted when shell is started in the Makefile, but I have not this
issue when I compile the same target without buildman.

I don't found the root reason of the problem but I solve it by
providing $(NM) as script parameter instead using a shell variable.

The command executed is identical:

cmd_keep-syms-lto.c := NM=arm-none-linux-gnueabihf-gcc-nm \
u-boot/scripts/gen_ll_addressable_symbols.sh arch/arm/cpu/built-in.o \
.... net/built-in.o >keep-syms-lto.c

cmd_keep-syms-lto.c := u-boot/scripts/gen_ll_addressable_symbols.sh \
arm-none-linux-gnueabihf-gcc-nm arch/arm/cpu/built-in.o \
... net/built-in.o > keep-syms-lto.c

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-28 20:46:34 -04:00
Marek Behún
da48bd9ee5 build: link with --build-id=none
Some toolchains are compiled so that they pass a --build-id=something
parameter to the linker implicitly.

This causes U-Boot LTO linking to fail with something like:
  ld: section .note.gnu.build-id LMA ... overlaps section .text LMA ...
because U-Boot's link scripts do not currently handle .note.gnu.build-id
section.

Fix this by explicitly disabling build-id.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-24 14:21:30 -04:00
Marek Behún
c1094987d1 build: support building with Link Time Optimizations
Add plumbing for building U-Boot with Link Time Optimizations.

When building with LTO, $(PLATFORM_LIBS) has to be in --whole-archive /
--no-whole-archive group, otherwise some functions declared in assembly
may not be resolved and linking may fail.

Note: clang may throw away linker list symbols it thinks are unused when
compiling with LTO. To force these symbols to be included, we refer to
them via the __ADDRESSABLE macro in a C file generated from compiled
built-in.o files before linking.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-24 14:21:30 -04:00
Marek Behún
958f2e57ef build: use thin archives instead of incremental linking
Currently we use incremental linking (ld -r) to link several object
files from one directory into one built-in.o object file containing the
linked code from that directory (and its subdirectories).

Linux has, some time ago, moved to thin archives instead.

Thin archives are archives (.a) that do not really contain the object
files, only references to them.

Using thin archives instead of incremental linking
- saves disk space
- apparently works better with dead code elimination
- makes things easier for LTO

The third point is the important one for us. With incremental linking
there are several options how to do LTO, and that would unnecessarily
complicate things.

We have to use the --whole-archive/--no-whole-archive linking option
instead of --start-group/--end-group, otherwise linking may fail because
of unresolved symbols, or the resulting binary will be unusable.

We also need to use the P flag for ar, otherwise final linking may fail.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-24 14:21:30 -04:00
Marek Behún
1445836ca7 Makefile, Makefile.spl: cosmetic change
Indent the linking commands so that they look cosmetically better.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-24 14:21:30 -04:00
Joel Peshkin
4e9bce1243 Add support for stack-protector
Add support for stack protector for UBOOT, SPL, and TPL
as well as new pytest for stackprotector

Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com>

Adjust UEFI build flags.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-20 07:31:12 -04:00
Simon Glass
354d232463 Makefile: Remove old of-platdata files before regenerating
Which files we generate depends on the setting of OF_PLATDATA_INST in the
build. This might change between builds, but the build directory may be
reused.

Leaving old files around is confusing and switching the OF_PLATDATA_INST
setting does not necessarily regenerate the files, e.g. if the devicetree
has not changed.

Remove all the files before regenerating new ones.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:08 +13:00
Simon Glass
56b313d1b6 Makefile: Use a variable for generated of-platdata headers
There are actually two generated files but only one is currently mentioned
in the Makefile as a dependency. Put them both in a Makefile variable and
use that instead, to avoid inconsistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:08 +13:00
Simon Glass
13d71152f1 Makefile: Depend only on required of-platdata files
When OF_PLATDATA_INST is enabled, we need dt-uclass.c and dt-device.c for
the build to work. When OF_PLATDATA_INST is not enabled, we only need
dt-plat.c

Update the Makefile rules to indicate this.

At present all files are generated and compiled regardless of which are
actually needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:08 +13:00
Simon Glass
6519da4741 Makefile: Avoid running dtoc every time
Since the dst_dir rule always runs, it causes a rebuild of the of-platdata
files even if not needed.

Create the directory inside the rule instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:08 +13:00
Simon Glass
4c6f65074e dm: Add the new dtoc-generated files to the build
Now that dtoc generates some new C files, add these to the build so that
the instantiated devices and uclasses can be used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-22 19:23:28 +13:00
Simon Glass
5a1b25c201 dm: of-platadata: Add option for device instantiation
Add Kconfig options to support build-time device instantiation. When
fully implemented, this will allow dtoc to create U-Boot devices (i.e.
struct udevice records) at build time, thus reducing code space in
SPL.

For now this defaults to off, but will be enabled when the rest of
the implementation is in place.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-22 19:23:27 +13:00
Simon Glass
67c053341f Makefile: Pass the U-Boot phase to dtoc
Pass the U-Boot phase as a parameter so dtoc can use it. At present it is
ether "spl" or "tpl".

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-22 19:23:27 +13:00
Dalon Westergreen
9773ebcfbc Makefile: socfpga: Add target to generate hex output for combined spl and dtb
Add target to Makefile to generate "u-boot-spl-dtb.hex" for Intel
SOCFPGA SOC64 devices (Stratix 10 and Agilex). "u-boot-spl-dtb.hex"
is hex formatted spl with and offset of CONFIG_SPL_TEXT_BASE. It
combines the spl image and dtb. "u-boot-spl-dtb.hex" is needed to
generate the final configuration bitstream for Intel SOCFPGA SOC64
devices.

Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-08 10:59:12 +08:00
Andre Przywara
acd832cd8c sunxi: Use mkimage for SPL boot image generation
Switch the SPL boot image generation from using mksunxiboot to the new
sunxi_egon format of mkimage.

Verified to create identical results for all 152 Allwinner boards.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Samuel Holland <samuel@sholland.org>
2021-01-11 23:19:33 +00:00
Simon Glass
f31fa99a9e dtoc: Rename dt-platdata.c to dt-plat.c
Use this new name to be consistent with the rest of U-Boot, which talks
about 'plat' for the platform data, which is what this file holds.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00
Simon Glass
be3bd3bb17 Makefile: Invoke dtoc only once
Update the Makefile to run dtoc only once, generating all required files.
This saves time since there is a lot of processing in each invocation of
dtoc.

We already have a variable for the object files to build, so use that
instead of repeating the same filenames. Add a C version of this also,
for the same reason.

This makes it easier to add new C files (generated by dtoc) to the build
later, as needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00
Simon Glass
aa88ac884c Makefile: Use common args for dtoc
At present the dtoc commmand line is repeated twice in the Makefile. Use a
variable to avoid this, so it is easier to add more conditional arguments.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:40 -07:00
Simon Glass
c7674fcb07 Makefile: Tidy up SPL dtb production
Use the SPL_NAME variable to simplify the rules. Drop the SPL targets
clean-files since the SPL and TPL dts/ directories are removed by
existing rules. Move the SPL rules into a new spl_dtbs to avoid the
complicated $(if) construct.

Also drop unused pieces from the 'targets' variable.

With this, SPL and TPL have separate dtbs which respect the various
u-boot,dm-spl / u-boot,dm-tpl tags.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:40 -07:00
Simon Glass
de3e372abd Makefile: Build SPL dtbs in the spl/ directory
Rather than putting these in the top-level dts/ directory (which is
intended for U-Boot proper), put them in the correct subdirectory for
SPL (either spl/ or tpl/). This is where other SPL targets are kept,
so this is more consistent.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:40 -07:00
Simon Glass
53db2eec7a Makefile: Build a separate .dtb for TPL
At present both SPL and TPL use the same devicetree binary. While there
is logic to run fdtgrep separately on each one, it does not actually
happen.

Add a new TPL rule and use that instead. Make this rule conditional on
there actually being a TPL. Do the same for SPL for consistency.

Note that the SPL and TPL dtbs are build by a Makefule rule used for
U-Boot proper. This is the 'dtbs' target in dts/Makefile. So the check
for CONFIG_TPL_BUILD in cmd_fdtgrep never actually works at present.

We don't support CONFIG_OF_EMBED for TPL at present.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:40 -07:00
Simon Glass
60251b1d53 Makefile: Generate a symbol file for u-boot-spl
Add a rule to generate u-boot-spl.sym so that pytest can discover the
available unit tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:18 -06:00
Simon Glass
ba96be48ad dm: test: Build tests for SPL
We want to run unit tests in SPL. Add a new Kconfig to control this and
enable it for sandbox_spl

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:18 -06:00
Simon Glass
e6385c7e9c Makefile: Rename ALL-y to INPUTS-y
When binman is in use, most of the targets built by the Makefile are
inputs to binman. We then need a final rule to run binman to produce the
final outputs.

Rename the variable to indicate this, and add a new 'inputs' target.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-28 19:30:39 -06:00
Jan Kiszka
5f09f9af3c kbuild: spl: Add shrunk arch-dtbs to targets list
This avoids needless rebuilding.

Fixes: 2f57c95100 ("spl: dm: Make it possible for the SPL to pick its own DTB from a FIT")
CC: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2020-05-14 11:36:19 -04:00
Jan Kiszka
5d3534de60 kbuild: spl: Fix parallel build
The dts dir must exists when running this rule.

That missing dependency broke e.g. "make -j" for the am65x targets.

Fixes: 2f57c95100 ("spl: dm: Make it possible for the SPL to pick its own DTB from a FIT")
CC: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2020-05-14 11:36:15 -04:00
Masahiro Yamada
f34d0ad82e kbuild: SPL/TPL: generate separate asm-offsets.h for SPL and TPL
Currently generic-asm-offsets.h and asm-offsets.h are generated based
on U-Boot proper config options. The same asm-offsets headers are used
for building U-Boot SPL/TPL, which causes potential offset mismatch if
U-Boot proper has different config options from U-Boot SPL/TPL.

This commit adds:
  spl/include/generated/(generic-)asm-offsets.h
  tpl/include/generated/(generic-)asm-offsets.h

spl/include/generated/(generic-)asm-offsets.h is generated if
CONFIG_SPL=y, and included when building SPL.

tpl/include/generated/(generic-)asm-offsets.h is generated if
CONFIG_TPL=y, and included when building TPL.

They are created before Kbuild descends into SPL/TPL object directories
and builds $(obj)/dts/dt-platdata.o because $(obj)/dts/dt-platdata.c
includes a bunch of headers.

Prepend -I$(obj)/include to $(UBOOTINCLUDE) so (generic-)asm-offsets.h
is searched in {spl,tpl}/include/generated/.

Requested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-28 15:44:31 -04:00
Masahiro Yamada
c3da3f5808 kbuild: add FORCE to dependency of $(obj)/dts/dt-platdata.o
if_changed must have FORCE as a prerequisite.

Add $(obj)/dts/dt-platdata.o to 'targets' so that the corresponding
.cmd file is included.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-24 16:40:09 -04:00
Tom Rini
587e4a4296 kconfig / kbuild: Re-sync with Linux 4.19
Align Kconfig and Kbuild logic to Linux 4.19 release with minimal impact
on files outside of this scope.

Our previous Kconfig sync was done by commit 5972ff077e ("kconfig /
kbuild: re-sync with Linux 4.18").

In this particular re-sync in order to keep clang support working a
number of related changes needed to be pulled in that had been missed
previously.  Not all of these changes we easily traceable and so have
been omitted from the list below.

The imported Linux commits are:
[From prior to v4.18]
9f3f1fd29976 kbuild: Add __cc-option macro
d7f14c66c273 kbuild: Enable Large File Support for hostprogs
6d79a7b424a5 kbuild: suppress warnings from 'getconf LFS_*'
24403874316a Shared library support
86a9df597cdd kbuild: fix linker feature test macros when cross compiling with Clang
0294e6f4a000 kbuild: simplify ld-option implementation

[From v4.18 to v4.19]
96f14fe738b6 kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGS
10844aebf448 kbuild: Rename HOSTCXXFLAGS to KBUILD_HOSTCXXFLAGS
b90a368000ab kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGS
8377bd2b9ee1 kbuild: Rename HOST_LOADLIBES to KBUILD_HOSTLDLIBS
f92d19e0ef9b kbuild: Use HOST*FLAGS options from the command line
4ab3b80159d4 kconfig: check for pkg-config on make {menu,n,g,x}config
693359f7ac90 kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE
f60b992e30ff kbuild: replace $(LDFLAGS) $(ldflags-y) with $(ld_flags)
2fb9279f2c3e kbuild: change ld_flags to contain LDFLAGS_$(@F)
c931d34ea085 arm64: build with baremetal linker target instead of Linux when available
5accd7f3360e kconfig: handle format string before calling conf_message_callback()
a2ff4040151a kconfig: rename file_write_dep and move it to confdata.c
0608182ad542 kconfig: split out useful helpers in confdata.c
adc18acf42a1 kconfig: remove unneeded directory generation from local*config
79123b1389cc kconfig: create directories needed for syncconfig by itself
16952b77d8b5 kconfig: make syncconfig update .config regardless of sym_change_count
d6c6ab93e17f kbuild: remove deprecated host-progs variable
56869d45e364 kconfig: fix the rule of mainmenu_stmt symbol
c151272d1687 kconfig: remove unused sym_get_env_prop() function
1880861226c1 kconfig: remove P_ENV property type
e3fd9b5384f3 scripts/dtc: consolidate include path options in Makefile
4bf6a9af0e91 kconfig: add build-only configurator targets
f1575595d156 kconfig: error out when seeing recursive dependency
5e8c5299d315 kconfig: report recursive dependency involving 'imply'
f498926c47aa kconfig: improve the recursive dependency report
98a4afbfafd2 kconfig: fix "Can't open ..." in parallel build
9a9ddcf47831 kconfig: suppress "configuration written to .config" for syncconfig
87a32e624037 kbuild: pass LDFLAGS to recordmcount.pl
d503ac531a52 kbuild: rename LDFLAGS to KBUILD_LDFLAGS
217c3e019675 disable stringop truncation warnings for now
bc8d2e20a3eb kconfig: remove a spurious self-assignment
fd65465b7016 kconfig: do not require pkg-config on make {menu,n}config
5a4630aadb9a ftrace: Build with CPPFLAGS to get -Qunused-arguments

Note that this adds new cleanup work to do in that we should adapt the
shared library support we have to what is now upstream.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-10 11:18:32 -04:00
Heiko Stuebner
22b7b86005 spl: separate SPL_FRAMEWORK config for spl and tpl
Right now enabling SPL_FRAMEWORK will also enable it for the TPL in all
cases, making the TPL bigger. There may be cases where the TPL is really
size constrained due to its underlying ram size.

Therefore introduce a new TPL_FRAMEWORK option and make the relevant
conditionals check for both. The default is set to "y if SPL_FRAMEWORK"
to mimic the previous behaviour where the TPL would always get the
SPL framework if it was enabled in SPL.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Vignesh Raghavendra
7e91f6ccdc usb: Add Cadence USB3 host and gadget driver
Add support for USB3 host and gadget driver. This is a direct sync of
Linux kernel Cadence USB stack that from v5.4-rc1 release.
Driver has been modified so that it compiles without errors against
U-Boot code base.
Features not required for U-Boot such as scatter-gather DMA and OTG
interrupt handling has been dropped.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
[jjhiblot@ti.com: Add PHY support]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-11-07 00:24:59 +01:00