Patrice Chotard e43a0d05bf ARM: dts: stm32: Don't probe red led at boot for stm32mp157c-ed1-scmi-u-boot ... red led and button dedicated to fastboot share the same gpio GPIOA13. Led driver is probed early so the corresponding gpio is taken and configured in output which forbid fastboot and stm32prog button usage. To avoid this, remove the "default-state" property from red led node. This will avoid to trigger the led driver probe() to configure the led default state during startup. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>		2024-04-19 12:05:10 +02:00
..
cpu	arm64: Fix map_range() not splitting mapped blocks	2024-04-10 08:41:00 -06:00
dts	ARM: dts: stm32: Don't probe red led at boot for stm32mp157c-ed1-scmi-u-boot	2024-04-19 12:05:10 +02:00
include	arm: imx9: Correct imx9_probe_mu prototype	2024-04-05 09:38:30 -03:00
lib	Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled""	2024-04-18 08:29:35 -06:00
mach-apple
mach-aspeed	arm: move image_copy_start/end to linker symbols	2024-03-29 10:39:25 -04:00
mach-at91
mach-bcm283x
mach-bcmbca
mach-bcmstb
mach-cortina
mach-davinci
mach-exynos
mach-highbank
mach-histb
mach-hpe
mach-imx	verdin-imx8mm/verdin-imx8mp: move imx verdins to OF_UPSTREAM	2024-04-05 09:39:01 -03:00
mach-integrator
mach-ipq40xx
mach-k3	arm: mach-k3: security: Lower verbosity of cert message for GP	2024-04-17 17:06:13 -06:00
mach-keystone
mach-kirkwood	arm: dts: kirkwood: Enable upstream DT on Kirkwood boards	2024-04-04 10:44:47 +02:00
mach-lpc32xx
mach-mediatek
mach-meson	dts: meson-g12a: Switch to using upstream DT	2024-04-04 18:48:46 +02:00
mach-mvebu	arm: mvebu: system-controller: Add support for SYSRESET	2024-04-04 10:45:27 +02:00
mach-nexell
mach-npcm
mach-octeontx
mach-octeontx2
mach-omap2	arm: mach-k3: Fix config check for FS_LOADER	2024-03-19 16:09:58 -04:00
mach-orion5x
mach-owl
mach-qemu
mach-renesas	ARM: dts: renesas: Switch to using upstream DT on 64bit Renesas SoCs	2024-04-18 05:21:03 +02:00
mach-rockchip	arm: move image_copy_start/end to linker symbols	2024-03-29 10:39:25 -04:00
mach-s5pc1xx
mach-snapdragon	mach-snapdragon: call regulators_enable_boot_on()	2024-04-04 17:46:47 +02:00
mach-socfpga	arm: socfpga: arria10: add option to reprogram the FPGA every reboot	2024-04-15 11:15:11 +08:00
mach-sti
mach-stm32
mach-stm32mp	ARM: stm32: Initialize TAMP_SMCR BKP..PROT fields on STM32MP15xx	2024-04-19 12:05:10 +02:00
mach-sunxi
mach-tegra
mach-u8500
mach-uniphier	ARM: uniphier: Move uniphier_mem_map_init() call into dram_init()	2024-04-12 08:53:31 -06:00
mach-versal
mach-versal-net	arm64: gic: Add power up sequence for GIC-600	2024-03-19 18:40:46 -04:00
mach-versatile
mach-zynq	arm: remove redundant section alignments	2024-03-29 10:39:25 -04:00
mach-zynqmp	Xilinx changes for v2024.07-rc1	2024-04-10 11:51:58 -06:00
mach-zynqmp-r5
thumb1/include/asm/proc-armv
config.mk
Kconfig	ARM: dts: renesas: Switch to using upstream DT	2024-04-18 05:21:26 +02:00
Kconfig.debug
Makefile