u-boot/arch/arm/dts/exynos5250-snow.dts
Neil Armstrong ffd4c7c2ec dts: switch spi-flash to jedec, spi-nor compatible
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot
dts files. This compatible has been added in sf_probe, let use it.

This patch switches to jedec,spi-nor when spi-flash is used in the DTS
and DTSI files, and removed spi-flash when jedec,spi-nor is already
present.

The x86 dts are switched in a separate commit since it depends on a change
in fdtdec.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Patrick Delaunay <Patrick.delaunay@st.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-04-12 10:54:27 +05:30

554 lines
11 KiB
Plaintext

/*
* SAMSUNG Snow board device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
/ {
model = "Google Snow";
compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
aliases {
i2c0 = "/i2c@12C60000";
i2c1 = "/i2c@12C70000";
i2c2 = "/i2c@12C80000";
i2c3 = "/i2c@12C90000";
i2c4 = "/i2c@12CA0000";
i2c104 = &i2c_104;
i2c5 = "/i2c@12CB0000";
i2c6 = "/i2c@12CC0000";
i2c7 = "/i2c@12CD0000";
spi0 = "/spi@12d20000";
spi1 = "/spi@12d30000";
spi2 = "/spi@12d40000";
spi3 = "/spi@131a0000";
spi4 = "/spi@131b0000";
mmc0 = "/mmc@12200000";
mmc1 = "/mmc@12210000";
mmc2 = "/mmc@12220000";
mmc3 = "/mmc@12230000";
serial0 = "/serial@12C30000";
console = "/serial@12C30000";
};
memory {
reg = <0x40000000 0x80000000>;
};
chosen {
bootargs = "console=tty1";
stdout-path = "serial3:115200n8";
};
iram {
reg = <0x02020000 0x60000>;
};
config {
samsung,bl1-offset = <0x1400>;
samsung,bl2-offset = <0x3400>;
u-boot-memory = "/memory";
u-boot-offset = <0x3e00000 0x100000>;
};
flash {
reg = <0 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
pre-boot {
label = "bl1 pre-boot";
reg = <0 0x2000>;
read-only;
filename = "e5250.nbl1.bin";
type = "blob exynos-bl1";
required;
};
spl {
label = "bl2 spl";
reg = <0x2000 0x4000>;
read-only;
filename = "bl2.bin";
type = "blob exynos-bl2 boot,dtb";
payload = "/flash/ro-boot";
required;
};
ro-boot {
label = "u-boot";
reg = <0x6000 0xb0000>;
read-only;
type = "blob boot,dtb";
required;
};
};
i2c-arbitrator {
compatible = "i2c-arb-gpio-challenge";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&{/i2c@12CA0000}>;
our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
slew-delay-us = <10>;
wait-retry-us = <3000>;
wait-free-us = <50000>;
/* Use ID 104 as a hint that we're on physical bus 4 */
i2c_104: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
battery: sbs-battery@b {
compatible = "sbs,sbs-battery";
reg = <0xb>;
sbs,poll-retry-count = <1>;
};
cros_ec: embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
interrupts = <6 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
wakeup-source;
i2c-max-frequency = <100000>;
u-boot,i2c-offset-len = <0>;
ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
};
power-regulator {
compatible = "ti,tps65090";
reg = <0x48>;
regulators {
dcdc1 {
ti,enable-ext-control;
};
dcdc2 {
ti,enable-ext-control;
};
dcdc3 {
ti,enable-ext-control;
};
fet1: fet1 {
regulator-name = "vcd_led";
ti,overcurrent-wait = <3>;
};
tps65090_fet2: fet2 {
regulator-name = "video_mid";
regulator-always-on;
ti,overcurrent-wait = <3>;
};
fet3 {
regulator-name = "wwan_r";
regulator-always-on;
ti,overcurrent-wait = <3>;
};
fet4 {
regulator-name = "sdcard";
ti,overcurrent-wait = <3>;
};
fet5 {
regulator-name = "camout";
regulator-always-on;
ti,overcurrent-wait = <3>;
};
fet6: fet6 {
regulator-name = "lcd_vdd";
ti,overcurrent-wait = <3>;
};
tps65090_fet7: fet7 {
regulator-name = "video_mid_1a";
regulator-always-on;
ti,overcurrent-wait = <3>;
};
ldo1 {
};
ldo2 {
};
};
charger {
compatible = "ti,tps65090-charger";
};
};
};
};
i2c@12CD0000 {
ptn3460: lvds-bridge@20 {
compatible = "nxp,ptn3460";
reg = <0x20>;
sleep-gpios = <&gpy2 5 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
edid-emulation = <5>;
ports {
port@0 {
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
port@1 {
bridge_in: endpoint {
remote-endpoint = <&dp_out>;
};
};
};
};
max98095: codec@11 {
compatible = "maxim,max98095";
reg = <0x11>;
#sound-dai-cells = <1>;
};
};
i2c@12C90000 {
clock-frequency = <100000>;
tpm@20 {
reg = <0x20>;
u-boot,i2c-offset-len = <0>;
compatible = "infineon,slb9635tt";
};
};
spi@12d30000 {
spi-max-frequency = <50000000>;
firmware_storage_spi: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
};
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
power-supply = <&fet1>;
};
panel: panel {
compatible = "auo,b116xw03";
power-supply = <&fet6>;
backlight = <&backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&bridge_out>;
};
};
};
spi@131b0000 {
spi-max-frequency = <1000000>;
spi-deactivate-delay = <100>;
/* Snow did support SPI but the released version used I2C */
embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
spi-max-frequency = <5000000>;
ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
optimise-flash-write;
status = "disabled";
};
};
sound {
compatible = "google,snow-audio-max98095";
samsung,model = "Snow-I2S-MAX98095";
samsung,audio-codec = <&max98095>;
codec-enable-gpio = <&gpx1 7 GPIO_ACTIVE_HIGH>;
cpu {
sound-dai = <&i2s0 0>;
};
codec {
sound-dai = <&max98095 0>;
};
};
sound@12d60000 {
status = "disabled";
};
i2c@12C60000 {
max77686@09 {
reg = <0x9>;
compatible = "maxim,max77686";
};
};
mmc@12200000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
samsung,removable = <0>;
};
mmc@12210000 {
status = "disabled";
};
mmc@12220000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
samsung,removable = <1>;
};
mmc@12230000 {
status = "disabled";
};
ehci@12110000 {
samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
xhci@12000000 {
samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
};
tmu@10060000 {
samsung,min-temp = <25>;
samsung,max-temp = <125>;
samsung,start-warning = <95>;
samsung,start-tripping = <105>;
samsung,hw-tripping = <110>;
samsung,efuse-min-value = <40>;
samsung,efuse-value = <55>;
samsung,efuse-max-value = <100>;
samsung,slope = <274761730>;
samsung,dc-value = <25>;
};
fimd@14400000 {
samsung,vl-freq = <60>;
samsung,vl-col = <1366>;
samsung,vl-row = <768>;
samsung,vl-width = <1366>;
samsung,vl-height = <768>;
samsung,vl-clkp;
samsung,vl-dp;
samsung,vl-hsp;
samsung,vl-vsp;
samsung,vl-bpix = <4>;
samsung,vl-hspw = <32>;
samsung,vl-hbpd = <80>;
samsung,vl-hfpd = <48>;
samsung,vl-vspw = <5>;
samsung,vl-vbpd = <14>;
samsung,vl-vfpd = <3>;
samsung,vl-cmd-allow-len = <0xf>;
samsung,winid = <0>;
samsung,interface-mode = <1>;
samsung,dp-enabled = <1>;
samsung,dual-lcd-enabled = <0>;
};
dp@145b0000 {
samsung,lt-status = <0>;
samsung,master-mode = <0>;
samsung,bist-mode = <0>;
samsung,bist-pattern = <0>;
samsung,h-sync-polarity = <0>;
samsung,v-sync-polarity = <0>;
samsung,interlaced = <0>;
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
dp_out: endpoint {
remote-endpoint = <&bridge_in>;
};
};
};
};
};
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
max77686: max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
wakeup-source;
reg = <0x09>;
#clock-cells = <1>;
voltage-regulators {
ldo1_reg: LDO1 {
regulator-name = "P1.0V_LDO_OUT1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "P1.8V_LDO_OUT2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "P1.8V_LDO_OUT3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "P1.1V_LDO_OUT7";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ldo8_reg: LDO8 {
regulator-name = "P1.0V_LDO_OUT8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo10_reg: LDO10 {
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo12_reg: LDO12 {
regulator-name = "P3.0V_LDO_OUT12";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
ldo14_reg: LDO14 {
regulator-name = "P1.8V_LDO_OUT14";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo15_reg: LDO15 {
regulator-name = "P1.0V_LDO_OUT15";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo16_reg: LDO16 {
regulator-name = "P1.8V_LDO_OUT16";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo17_reg: LDO17 {
regulator-name = "vdd_mydp";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck5_reg: BUCK5 {
regulator-name = "P1.8V_BUCK_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
buck6_reg: BUCK6 {
regulator-name = "P1.35V_BUCK_OUT6";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
buck7_reg: BUCK7 {
regulator-name = "P2.0V_BUCK_OUT7";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
buck8_reg: BUCK8 {
regulator-name = "P2.85V_BUCK_OUT8";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
};
};
};
#include "cros-ec-keyboard.dtsi"