290 lines
15 KiB
C
290 lines
15 KiB
C
/*
|
|
* Copyright 2017-2020 NXP
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
/***********************************************************************************************************************
|
|
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
|
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
|
**********************************************************************************************************************/
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
!!GlobalInfo
|
|
product: Pins v7.0
|
|
processor: LPC55S69
|
|
package_id: LPC55S69JBD100
|
|
mcu_data: ksdk2_0
|
|
processor_version: 6.0.0
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
#include "fsl_common.h"
|
|
#include "fsl_iocon.h"
|
|
#include "pin_mux.h"
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitBootPins
|
|
* Description : Calls initialization functions.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitBootPins(void)
|
|
{
|
|
BOARD_InitPins();
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitPins:
|
|
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29,
|
|
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 (Core #0) */
|
|
void BOARD_InitPins(void)
|
|
{
|
|
/* Enables the clock for the I/O controller.: Enable Clock. */
|
|
CLOCK_EnableClock(kCLOCK_Iocon);
|
|
|
|
const uint32_t port0_pin29_config = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */
|
|
IOCON_PIO_FUNC1 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */
|
|
IOCON_PinMuxSet(IOCON, 0U, 29U, port0_pin29_config);
|
|
|
|
const uint32_t port0_pin30_config = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */
|
|
IOCON_PIO_FUNC1 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */
|
|
IOCON_PinMuxSet(IOCON, 0U, 30U, port0_pin30_config);
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
SPI8_InitPins:
|
|
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '61', peripheral: FLEXCOMM8, signal: HS_SPI_SCK, pin_signal: PIO1_2/CTIMER0_MAT3/SCT_GPI6/HS_SPI_SCK/USB1_PORTPWRN/PLU_OUT5, mode: pullUp, slew_rate: standard,
|
|
invert: disabled, open_drain: disabled}
|
|
- {pin_num: '60', peripheral: FLEXCOMM8, signal: HS_SPI_MOSI, pin_signal: PIO0_26/FC2_RXD_SDA_MOSI_DATA/CLKOUT/CT_INP14/SCT0_OUT5/USB0_IDVALUE/FC0_SCK/HS_SPI_MOSI/SECURE_GPIO0_26,
|
|
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '62', peripheral: FLEXCOMM8, signal: HS_SPI_MISO, pin_signal: PIO1_3/SCT0_OUT4/HS_SPI_MISO/USB0_PORTPWRN/PLU_OUT6, mode: pullUp, slew_rate: standard,
|
|
invert: disabled, open_drain: disabled}
|
|
- {pin_num: '59', peripheral: FLEXCOMM8, signal: HS_SPI_SSEL1, pin_signal: PIO1_1/FC3_RXD_SDA_MOSI_DATA/CT_INP3/SCT_GPI5/HS_SPI_SSEL1/USB1_OVERCURRENTN/PLU_OUT4,
|
|
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : SPI8_InitPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 (Core #0) */
|
|
void SPI8_InitPins(void)
|
|
{
|
|
/* Enables the clock for the I/O controller.: Enable Clock. */
|
|
CLOCK_EnableClock(kCLOCK_Iocon);
|
|
|
|
const uint32_t port0_pin26_config = (/* Pin is configured as HS_SPI_MOSI */
|
|
IOCON_PIO_FUNC9 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN26 (coords: 60) is configured as HS_SPI_MOSI */
|
|
IOCON_PinMuxSet(IOCON, 0U, 26U, port0_pin26_config);
|
|
|
|
const uint32_t port1_pin1_config = (/* Pin is configured as HS_SPI_SSEL1 */
|
|
IOCON_PIO_FUNC5 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN1 (coords: 59) is configured as HS_SPI_SSEL1 */
|
|
IOCON_PinMuxSet(IOCON, 1U, 1U, port1_pin1_config);
|
|
|
|
const uint32_t port1_pin2_config = (/* Pin is configured as HS_SPI_SCK */
|
|
IOCON_PIO_FUNC6 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN2 (coords: 61) is configured as HS_SPI_SCK */
|
|
IOCON_PinMuxSet(IOCON, 1U, 2U, port1_pin2_config);
|
|
|
|
const uint32_t port1_pin3_config = (/* Pin is configured as HS_SPI_MISO */
|
|
IOCON_PIO_FUNC6 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN3 (coords: 62) is configured as HS_SPI_MISO */
|
|
IOCON_PinMuxSet(IOCON, 1U, 3U, port1_pin3_config);
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
SPI8_DeinitPins:
|
|
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list: []
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : SPI8_DeinitPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 (Core #0) */
|
|
void SPI8_DeinitPins(void)
|
|
{
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
I2C4_InitPins:
|
|
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard,
|
|
invert: disabled, open_drain: enabled}
|
|
- {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp,
|
|
slew_rate: standard, invert: disabled, open_drain: enabled}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : I2C4_InitPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 (Core #0) */
|
|
void I2C4_InitPins(void)
|
|
{
|
|
/* Enables the clock for the I/O controller.: Enable Clock. */
|
|
CLOCK_EnableClock(kCLOCK_Iocon);
|
|
|
|
const uint32_t port1_pin20_config = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */
|
|
IOCON_PIO_FUNC5 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is enabled */
|
|
IOCON_PIO_OPENDRAIN_EN);
|
|
/* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */
|
|
IOCON_PinMuxSet(IOCON, 1U, 20U, port1_pin20_config);
|
|
|
|
const uint32_t port1_pin21_config = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */
|
|
IOCON_PIO_FUNC5 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is enabled */
|
|
IOCON_PIO_OPENDRAIN_EN);
|
|
/* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */
|
|
IOCON_PinMuxSet(IOCON, 1U, 21U, port1_pin21_config);
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
I2C4_DeinitPins:
|
|
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list: []
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : I2C4_DeinitPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 (Core #0) */
|
|
void I2C4_DeinitPins(void)
|
|
{
|
|
}
|
|
/***********************************************************************************************************************
|
|
* EOF
|
|
**********************************************************************************************************************/
|