Embedded_SDK
/
MCUXpresso_MIMXRT1052xxxxB
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
MCUXpresso_MIMXRT1052xxxxB/boards/evkbimxrt1050/azure_rtos_examples/usbx_device_mass_storage
History
Yilin Sun 6baf4427ce
Updated to v2.15.000 
Signed-off-by: Yilin Sun <imi415@imi.moe>
 		2024-03-18 23:15:10 +08:00
..
armgcc Updated to v2.15.000 2024-03-18 23:15:10 +08:00
board.c Updated to v2.15.000 2024-03-18 23:15:10 +08:00
board.h Updated to v2.15.000 2024-03-18 23:15:10 +08:00
board_setup.c Updated to v2.12.0 2022-08-24 23:30:23 +08:00
board_setup.h SDK v2.11.1 2022-04-08 22:46:35 +08:00
clock_config.c Update SDK to v2.13.0 2023-01-26 09:35:56 +08:00
clock_config.h Update SDK to v2.13.0 2023-01-26 09:35:56 +08:00
dcd.c SDK v2.11.1 2022-04-08 22:46:35 +08:00
dcd.h SDK v2.11.1 2022-04-08 22:46:35 +08:00
fx_user.h Updated to v2.14.0 2023-11-30 20:55:00 +08:00
nx_user.h Updated to v2.14.0 2023-11-30 20:55:00 +08:00
pin_mux.c SDK v2.11.1 2022-04-08 22:46:35 +08:00
pin_mux.h SDK v2.11.1 2022-04-08 22:46:35 +08:00
readme.md Updated to v2.15.000 2024-03-18 23:15:10 +08:00
tx_user.h Updated to v2.14.0 2023-11-30 20:55:00 +08:00
usb_device_config.h Updated to v2.12.0 2022-08-24 23:30:23 +08:00
usbx_device_mass_storage.c Update SDK to v2.13.0 2023-01-26 09:35:56 +08:00
usbx_device_mass_storage_v3_14.xml Updated to v2.15.000 2024-03-18 23:15:10 +08:00
ux_user.h Updated to v2.15.000 2024-03-18 23:15:10 +08:00

readme.md

Overview

This example illustrates USBX Device Mass Storage.

SDK version

  • Version: 2.15.000

Toolchain supported

  • IAR embedded Workbench 9.40.1
  • Keil MDK 5.38.1
  • GCC ARM Embedded 12.2
  • MCUXpresso 11.8.0

Hardware requirements

  • Mini/micro USB cable
  • Target Board
  • Personal Computer(PC)

Board settings

No special settings are required.

Prepare the Demo

  1. Connect a USB cable between the host PC and the OpenSDA USB port on the target board.
  2. Open a serial terminal with the following settings:
    • 115200 baud rate
    • 8 data bits
    • No parity
    • One stop bit
    • No flow control
  3. Compile the demo with the configuration, "flexspi_nor_debug".
  4. Write the program to the flash of the target board.
  5. Press the reset button on your board to start the demo.
  6. Connect a USB cable between the PC and the USB device port of the board.
  7. PC can format/read/write this u-disk. Running the demo ================ After writing the program to the flash of the target board, press the reset button on your board to start the demo. The serial port will output:

USBX device mass storage example

Then, connect a USB cable between PC and USB device port of the board. The serial port will output:

USB MSD device activate

PC will detect a u-disk and can format it. After format is completed, the PC will display a removable disk and it can be used as a normal u-disk.

Please note that the USBX Device Mass Storage example use RAM disk as storage media, data will lost after board is reset.