1.3 KiB
1.3 KiB
Overview
The SD JPEG Demo application reads the JPEG pictures from the SD card, decodes them, and shows them in the LCD panel one by one. Note: Please make sure the card you are using is FAT32 format.
SDK version
- Version: 2.15.000
Toolchain supported
- IAR embedded Workbench 9.40.1
- Keil MDK 5.38.1
- GCC ARM Embedded 12.2
- MCUXpresso 11.8.0
Hardware requirements
- Micro USB cable
- EVKB-IMXRT1050 board
- JLink Plus
- 5V power supply
- Personal Computer
- RK043FN02H-CT or RK043FN66HS-CT6 LCD board (RK043FN02H-CT and RK043FN66HS-CT6 are compatible)
- SD card
Board settings
- Connect the RK043FN02H-CT or RK043FN66HS-CT6 to board.
- Unzip the pics.zip, place the jpg pictures to the SD card.
- Insert the SDCARD into card slot.
Prepare the Demo
- Connect a USB cable between the host PC and the OpenSDA USB port on the target board.
- Open a serial terminal with the following settings:
- 115200 baud rate
- 8 data bits
- No parity
- One stop bit
- No flow control
- Download the program to the target board.
- Launch the debugger in your IDE to begin running the demo.
Running the demo
If this example runs correctly, pictures are shown in the lcd panel one by one.