openocd/src/target/target/omap5912.cfg

43 lines
1.0 KiB
INI
Raw Normal View History

#TI OMAP5912 dual core processor - http://www.ti.com
#on a OMAP5912 OSK board http://www.spectrumdigital.com.
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 38 0x0 0x0 0x0
jtag_device 4 0x1 0x0 0xe
jtag_device 8 0x0 0x0 0x0
target create target0 arm926ejs -endian little -chain-position 1 -variant arm926ejs
[new_target_name] configure -event reset-init {
#
# halt target
#
poll
sleep 1
halt
wait_halt
#
# disable wdt
#
mww 0xfffec808 0x000000f5
mww 0xfffec808 0x000000a0
mww 0xfffeb048 0x0000aaaa
sleep 500
mww 0xfffeb048 0x00005555
sleep 500
#
# detect flash
#
flash probe 0
}
# omap5912 lcd frame buffer as working area
[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x3e800 -work-area-backup 0
#flash bank <driver> <base> <size> <chip_width> <bus_width>
flash bank cfi 0x00000000 0x1000000 2 2 0