Commit Graph

11 Commits

Author SHA1 Message Date
Antonio Borneo e6505b0489 tcl/target: add SPDX tag
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
	fgrep -rL SPDX tcl/ target| while read a;do \
	sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
	}' $a;done

With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.

Change-Id: I7b2610300b24cccd07bfa6fb5f1266970d5d3a1b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7027
Tested-by: jenkins
2022-06-24 21:53:35 +00:00
Antonio Borneo 38ac08c1c2 tcl: replace the deprecated commands with "adapter ..."
Avoid annoying "deprecated" messages while running the scripts
distributed with OpenOCD code.
Change automatically created with commands
	sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f)

Minor indentation issue fixed manually in
	tcl/board/at91sam9g20-ek.cfg
	tcl/target/at91sam9260_ext_RAM_ext_flash.cfg

Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5284
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-01-29 06:34:43 +00:00
Andreas Fritiofson 1c021ed0af target: Remove "-variant" argument
Remove this underutilized feature. Despite the fact that a lot of configs
specifies a arbitrary "variant", only the xscale target actually defines
any.

In the case of xscale, the use of -variant is dubious since

1) it's used as a redundant irlen specifier,
2) it carries a comment that it doesn't really need it and
3) only two xscale configs even specify it.

If there's a future target that needs a variant set, a target specific
option could be added when needed.

Change-Id: I1ba25a946f0d80872cbd96ddcc48f92695c4ae20
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2283
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-22 19:39:24 +00:00
Paul Fertser d4e195ad1b Remove jtag_rclk from target configs
Some boards might have RCLK omitted from the JTAG connector and if the
interface claims support for it, OpenOCD will end up trying to use
RCLK while it's actually impossible.

This is a "cd tcl/target; sed -i s/jtag_rclk/adapter_khz/g *" patch.

Change-Id: Iee7337107bc1457966b104389ba9db75a9c860b4
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1695
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2013-10-29 22:49:35 +00:00
Uwe Hermann ca45e700b1 target config files: Fix whitespace issues.
Drop useless double-space occurences, drop trailing whitespace, and fix
some other minor whitespace-related issues.

Change-Id: I6b4c515492e2ee94dc25ef1fe4f51015a4bba8b5
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/137
Tested-by: jenkins
2011-11-07 16:16:33 +00:00
Uwe Hermann abfd4b19a6 config files: Drop incorrect comments.
There are many "force an error till we get a good number" comments in
target/board files. This refers to the use-case where a config script
sets _CPUTAPID to 0xffffffff (which presumely gets overridden later):

 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
    # Force an error until we get a good number.
    set _CPUTAPID 0xffffffff
 }

However, the same comment was also copy-pasted in many files which do
_not_ set _CPUTAPID to 0xffffffff, where the comment doesn't make any
sense at all. Drop those comments. Also, add one missing comment, and
fix small whitespace and grammar issues.

Change-Id: Ic4ba3b5ccba87ed40cea0d6a7d66609fbdfa3c71
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/136
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-30 01:57:33 +00:00
David Brownell 80a757d82e testing/examples/.../*cfg: rm jtag_device calls
That syntax has been obsolete forever and is now gone; remove a few
remaining references.  Shows how seldom this stuff gets used.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-15 14:45:26 -08:00
David Brownell 3e6f9e8d1e target.cfg: remove "-work-area-virt 0"
The semantics of "-work-area-virt 0" (or phys) changed with
the patch to require specifying physical or virtrual work
area addresses.  Specifying zero was previously a NOP.  Now
it means that address zero is valid.

This patch addresses three related issues:

 - MMU-less processors should never specify work-area-virt;
   remove those specifications.  Such processors include
   ARM7TDMI, Cortex-M3, and ARM966.

 - MMU-equipped processors *can* specify work-area-virt...
   but zero won't be appropriate, except in mischievous
   contexts (which hide null pointer exceptions).

   Remove those specs from those processors too.  If any of
   those mappings is valid, someone will need to submit a
   patch adding it ... along with a comment saying what OS
   provides the mapping, and in which context.  Example,
   say "works with Linux 2.6.30+, in kernel mode".  (Note
   that ARM Linux doesn't map kernel memory to zero ...)

 - Clarify docs on that "-virt" and other work area stuff.

Seems to me work-area-virt is quite problematic; not every
operating system provides such static mappings; if they do,
they're not in every MMU context...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-08 08:52:40 -08:00
dbrownell 71af49ca7f Remove annoying end-of-line whitespace from tcl/* files
git-svn-id: svn://svn.berlios.de/openocd/trunk@2743 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21 18:48:22 +00:00
oharboe ce89c7bf65 David Brownell <david-b@pacbell.net> "set _TARGETNAME ..." cleanup
git-svn-id: svn://svn.berlios.de/openocd/trunk@2665 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04 05:17:03 +00:00
zwelch dbbc9c41f7 Move TCL script files -- Step 2 of 2:
- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27 06:49:24 +00:00