* GDB remote server will now remain online even if the target
is in a funny state, e.g. if it requires a reset, it is
running while GDB is not in the continue or step packet,
e.g. via monitor resume/halt commands in GDB script.
* Added some _DEBUG_GDB_IO_ debug tools
* Fixed a couple of GDB server lockups, e.g. when O packets
detect a severed connection
* added ACK upon connection (send +).
* added keep-alive messages to reset so GDB protocol remains happy.
* fixed crash when timing out connection to GDB
git-svn-id: svn://svn.berlios.de/openocd/trunk@445 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- open_file_from_path() now uses logging feature
- open_file_from_path() no longer uses paths for anything but "r" mode. Fixes
bug waiting to happen.
git-svn-id: svn://svn.berlios.de/openocd/trunk@389 b42882b7-edfa-0310-969c-e2dbd0fdcd60
arm11
--- Added burst memory transfer mode
This does not explicitly query command execution but rather uses a small
delay produced by the FT2232 on certain TAP commands.
A potential failure of this process is detected afterwards and the
program terminates with an error.
'arm11 memwrite burst disable'
can be used to switch this feature off.
'arm11 memwrite error_fatal disable'
can be used to prevent the program to exit on an memory write error
--- Added support for interrupt breaking via VCR register
Use 'arm11 vcr' command to set.
--- Cleaned up the handling of
halt/resume/step/poll, target->state, target->debug_reason,
target_call_event_callbacks() at least as far as I could guess the
intended behaviour from other targets.
Did some overall positive tests with GDB.
--- Added support for breakpoints
Hardware breakpoints only. All breakpoints will be treated as hardware
breakpoints.
All ARM11's seem to have at least 6 hardware breakpoints.
--- Stepping over BKPT added
Modification to PC without touching the target.
--- Stepping over a B or BL to self will do nothing
git-svn-id: svn://svn.berlios.de/openocd/trunk@385 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- bugfix in server.c
- removed unused parameter from jtag_add_ir_scan et al. This
wasn't necessary in hindsight but anyway.
- arm11 source committed but not not in Makefile.am/target.c for now.
git-svn-id: svn://svn.berlios.de/openocd/trunk@341 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- some more flash cleanup of checking halted state
- moved output handler into options.c
- very slightly tweaked server.c to make it a bit more compatible with eCos
- retired arch_state. Not quite sure how I managed to leave that out last time.
git-svn-id: svn://svn.berlios.de/openocd/trunk@338 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added arch_state to show status of currently selected target
- simplified target->type->arch_state() api.
- clean up telnet output a bit
- fixed GDB output for arch_state
- removed a couple of unecessary exit()'s
- cleaned up error propagation a bit in a few places
git-svn-id: svn://svn.berlios.de/openocd/trunk@332 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added virtual address to working_area.
- Improved error messages in a number of places
- Added ERROR_COMMAND_SYNTAX_ERROR that commands can return to have syntax printed
- Added help for some config commands
- Added verification of sw breakpoints with ERROR() message
- Removed a couple of exit()'s and replaced with error message
- cosmetic fix to armv4_5.c, easier to read
- added polymorphic(with default) virt2phys and mmu enable query function to target.h
- added virt2phys command that uses target->type->virt2phys() fn
Thanks to Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@310 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Faster DEBUG/INFO() when they are disabled
- target_read/write_buffer() now uses 16 and 32 bit access for single word aligned requests. Other requests are serviced as quickly as possible.
- *much* faster read/write GDB packets, removing timeout problems.
- GDB read/write packets w/single word aligned 32/16 bit access now use 32/16 bit word access.
- working area can now be changed on the fly. Provides a way to move working area about as MMU is enabled/disabled.
- cleaned up error messages for verify_image.
Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@302 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added target_init_reset which calls target_process_reset after all drivers have been initialised
git-svn-id: svn://svn.berlios.de/openocd/trunk@284 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- target request handler disabled by default until a target has been registered
git-svn-id: svn://svn.berlios.de/openocd/trunk@259 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- native win32 now handles WSAECONNRESET - no longer exits openocd
- qCRC packet now works correctly under cygwin (gdb compare-sections command)
- removed __USE_GNU define from gdbserver.c
- gdb qSupported packet is now handled, with this we are able to tell gdb packet size, memory map of target
- added new target script gdb_program_config - called before gdb flash programming
- new gdb server command gdb_memory_map (enable|disable> - default is disable
- new gdb server command gdb_flash_program (enable|disable> - default is disable
- gdb flash programming supported - vFlash packets
- image_elf_read_section now does not clear any remaining data, this was causing the gdb checksum to fail with certain files
- reformat of usbprog.c
- memory leak in command_print fixed
- updated texi doc to include new commands
- added gdb programming section to docs
git-svn-id: svn://svn.berlios.de/openocd/trunk@246 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- minor code reformat and cleanup
- updated docs to include new commands
git-svn-id: svn://svn.berlios.de/openocd/trunk@243 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added patch which fixes a crash upon flash write error
- added patch which will improve the reset handling when
SRST is tied to TRST
(thanks to Oyvind Harboe for these patches)
git-svn-id: svn://svn.berlios.de/openocd/trunk@218 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Clean up, remove unused variables and code in armv7, cortex_m3 and stellaris code
- Move restore_context from cortex_m3 to armv7m
- Updated halt handling for cortex_m3
git-svn-id: svn://svn.berlios.de/openocd/trunk@206 b42882b7-edfa-0310-969c-e2dbd0fdcd60
--enable-presto_ftd2xx and --enable-presto_libftdi
- completed trace point support for use with ARM7/9 DCC
- completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities)
- fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy)
- fixed bug in image_add_section (thanks to Pavel Chromy)
- at91sam7 sector erase reworked (thanks to Pavel Chromy)
- merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets
git-svn-id: svn://svn.berlios.de/openocd/trunk@194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin)
- various whitespace fixes
- removed various warnings
- add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann)
- fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin)
- switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed)
- added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include
semihosting, all ARM7/9 only for now)
- added support for GDB vFlashXXX packets (thanks to Pavel Chromy)
- added support for receiving data via ARM7/9 DCC
- reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash
write_image' (write image files (bin, hex, elf, s19) to a target).
- added support for AMD/ST/SST 29F400B non-cfi flashes
git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fix multiple reads from FT2232 into same buffer location (thanks to Magnus Lundin)
- retry JTAG chain validation (thanks to Magnus Lundin)
- reworked GDB packet input handling (thanks to Pavel Chromy)
- output error message when setting a watchpoint failed
- removed duplicate out-of-bounds check in at91sam7.c (thanks to Pavel Chromy)
git-svn-id: svn://svn.berlios.de/openocd/trunk@181 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- ST STM32x flash support added
- cleaned up armv7m and cortex-m3 support, removed luminary specific code
- cortex-m3 16bit read/write added (required for STM32x flash programming)
git-svn-id: svn://svn.berlios.de/openocd/trunk@177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added str9x programming using flash controller tap (str9xpec), including option bytes and device lock/unlock
- inttypes.h now used for long long printf style declarations
git-svn-id: svn://svn.berlios.de/openocd/trunk@174 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed bug in ARM926EJ-S cache handling that caused cache linefills to be disabled after first debug entry
- added support for auto image type detection (thanks to Vincent Palatin)
- further work on ETM trace decoding (tested with a ETB interface using an ETM in normal 16-bit port mode, still experimental)
git-svn-id: svn://svn.berlios.de/openocd/trunk@169 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This checkin is still experimental, not recommended for general use
git-svn-id: svn://svn.berlios.de/openocd/trunk@159 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- reworked etm/etb into a generic etm part with trace capture drivers (currently only etb supported)
- added XScale debug handler binary to repository
- added Thumb disassembling (thanks to Vincent Palatin for this patch)
- added support for non-CFI compatible flashes to cfi driver (currently only SST39VFxxx devices supported)
This checkin is experimental, not suitable for general use
git-svn-id: svn://svn.berlios.de/openocd/trunk@155 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added "prepare_reset_halt()" to target_type_t, which allows reset_halt to be prepared before a reset is asserted, possibly preventing communication with the target
- arm7/9 devices now use a breakpoint at 0x0 or reset vector catching for debug out of reset
git-svn-id: svn://svn.berlios.de/openocd/trunk@141 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed some compiler warnigns in amt_jtagaccel.c, bitbang.c, parport.c
- free working area and register stuff if str7x block write algorithm failed
- check PC after exiting a target algorithm in armv4_5.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed compiler warnings throughout the code (thanks to Vincent Palatin for this patch)
- added support for accessing ETB (embedded trace buffer) registers
git-svn-id: svn://svn.berlios.de/openocd/trunk@134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added support for reading IHEX files (through fileio)
- load/dump_binary renamed to the more generic load/dump_image <file> <address> ['bin'|'ihex']
- added NAND framework (preliminary)
- added support for the LPC3180 SLC and MLC NAND controllers (preliminary)
- fix initialization for parport
- gw16012 fixes/cleanups
- added EmbeddedICE version 7 (preliminary, reported on two LPC23xx devices so far)
- added 'arm7_9 etm <target#>' configuration command to enable access to the ETM registers
git-svn-id: svn://svn.berlios.de/openocd/trunk@132 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fix infinite recursion in target_init_handler (thanks to jw and Magnus Lundin)
- fix CFI flash handlign with buswidth < 32bit (thanks to Daniele Orio for reporting this)
- add support for reading JTAG device id (currently only as debug output on startup)
- cleaned up handling of EmbeddedICE registers. Supported functionality and register size now determined by EmbeddedICE version number.
- small cleanups/fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@124 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- several small fixes
- retry reading from a FT2232 device on incomplete reads
git-svn-id: svn://svn.berlios.de/openocd/trunk@110 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- str75x flash support (Thanks to Spencer Oliver)
- correct reporting of T-Bit in CPSR (Thanks to John Hartman for reporting this)
- core-state (ARM/Thumb) can be switched by modifying CPSR
- fixed bug in gdb_server register handling
- register values > 32-bit should now be supported
- several minor fixes and enhancements
git-svn-id: svn://svn.berlios.de/openocd/trunk@100 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added access to ARM920T vector catch register (via generic register mechanism)
- don't disable linefills on ARM920T cores - this lead to lockups when accessing lines already contained in cache
- read content of ARM920T cache and tlb into file (arm920t read_flash/read_mmu commands)
- memory reading improved on ARM7/9, can be further accelerated with new "arm7_9 fast_memory_access enable" command (renamed from fast_writes)
- made in_handler independent from in field (makes the handler more flexible)
- added timeout to ft2232 when using D2XX library
- fixed STR7x protection bit handling on second bank (thanks to Bernard)
- added support for using the OpenOCD on AT91RM9200 systems (thanks to Anders Larsen)
- fixed AT91SAM7 flash handling when not running from 32kHz clock (thanks to Anders Larsen)
git-svn-id: svn://svn.berlios.de/openocd/trunk@90 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed bug that could result in register corruption on arm920t targets
git-svn-id: svn://svn.berlios.de/openocd/trunk@89 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed some small memory leaks (thanks to Spencer Oliver)
- verify chip- and buswidth of cfi flash configurations
- added support for ARM966E based systems (tested only with ST micro STR9, thanks to Spencer Oliver)
git-svn-id: svn://svn.berlios.de/openocd/trunk@81 b42882b7-edfa-0310-969c-e2dbd0fdcd60
